Online Estimation of Per-Phase Stator Resistance Based on DC-Signal Injection for Condition Monitoring in Multiphase Drives
- 23 March 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (3) , 2227-2239
Abstract
Multiphase drives with high reliability are receiving increasing attention by the research community in safety-critical applications. Condition monitoring is an effective way to improve drive reliability, because it can detect the development of faults and offer the possibility of predictive maintenance. Among the different condition monitoring methods, online estimation of stator resistance is a promising technique for its ability to detect high-resistance connections, overheating of stator windings and other defects. In this article, an online estimation method of stator resistance based on dc-signal injection is proposed for multiphase drives. The dc currents are injected in the subspace with the smallest main inductance to minimize the induced torque ripple. Phase voltages are measured and the dc components are extracted to calculate the resistance in all the phases. Compared with existing methods, the proposed method can estimate the per-phase stator resistance with higher accuracy and higher robustness, which provides additional benefits in condition monitoring applications. In addition, the proposed method is derived in a general way, which makes it applicable to most kinds multiphase drive systems. Experimental results on a nine-phase induction machine and a five-phase induction machine validate the high accuracy, high robustness, and high generality of the proposed technique.Keywords
Funding Information
- National Natural Science Foundation of China (51777111)
This publication has 34 references indexed in Scilit:
- Selection Criteria of Multiphase Induction Machines for Speed-Sensorless Drives Based on Rotor Slot HarmonicsIEEE Transactions on Industrial Electronics, 2016
- Current Balance Control for Symmetrical Multiphase InvertersIEEE Transactions on Power Electronics, 2015
- Estimation Method of Stator Winding Temperature for Dual Three-Phase Machines Based on DC-Signal InjectionIEEE Transactions on Power Electronics, 2015
- Decentralized Control of a Nine-Phase Permanent Magnet Generator for Offshore Wind TurbinesIEEE Transactions on Energy Conversion, 2015
- Advances in Electrical Machine, Power Electronic, and Drive Condition Monitoring and Fault Detection: State of the ArtIEEE Transactions on Industrial Electronics, 2014
- Online Detection of High-Resistance Connections in Multiphase Induction MachinesIEEE Transactions on Power Electronics, 2014
- Trends in Electrical Machines Control: Samples for Classical, Sensorless, and Fault-Tolerant TechniquesIEEE Industrial Electronics Magazine, 2014
- Postfault Operation of an Asymmetrical Six-Phase Induction Machine With Single and Two Isolated Neutral PointsIEEE Transactions on Power Electronics, 2013
- Detection and Localization of Stator Resistance Dissymmetry Based on Multiple Reference Frame Controllers in Multiphase Induction Motor DrivesIEEE Transactions on Industrial Electronics, 2012
- Torque density improvement in a six-phase induction motor with third harmonic current injectionIEEE Transactions on Industry Applications, 2002