Yongdong Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yongdong Li has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Kui Wang
Tsinghua University
8 shared publications - Zedong Zheng
Department of Electrical Engineering, State Key Laboratory of Power System Operation and Control, Tsinghua University, Beijing, China
7 shared publications - Lie Xu
Electrical Engineering, Tsinghua University, 12442 Beijing, Beijing China
2 shared publications - Bo Yang
Xi'an University of Technology, 12479 Xi'an, Shaanxi China
1 shared publication - Chi Li
Department of Electrical Engineering, State Key Laboratory of Power System Operation and Control, Tsinghua University, Beijing, China
1 shared publication - Jiawei Sun
State Key Lab of Control and Simulation of Power Systems and Generation Equipments, Department of Electrical Engineering, Tsinghua University, Beijing, China
1 shared publication
Latest Publications
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (6) , 7181-7191
A Novel Sensorless Capacitor Voltage Balancing Method for the Modular Multilevel DC Transformer With Diode-Clamped Circuits
This article proposed a novel sensorless capacitor voltage balancing method for the modular multilevel dc transformer (MMDCT), which is a promising solution for interconnecting dc grids. The MMDCT comprises two modular multilevel converters (MMCs) and a medium frequency transformer (MFT), where the MFT provides galvanic isolation between the input and output dc grids and the MMCs offer high-voltage handling capability. In order to produce medium frequency sine-wave voltages at the MFT terminals, the phase shift carrier pulsewidth modulation (PSC-PWM) is employed for the MMCs. Typically, a feedback controller is required for each submodule of the MMC to regulate the capacitor voltage to its nominal value, resulting in increased costs due to the requirement for a large number of voltage sensors and fiber optic transceivers. To address this issue, low power rating clamping circuits are implemented between each adjacent submodule of the MMC, and the capacitor charge differences caused by the PSC-PWM are analyzed. Sequential balancing and nonsequential balancing are proposed to achieve capacitor voltage self-balance. Both simulation and experiment results have shown that the capacitor voltages are well-balanced with the proposed method.
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (6) , 7181-7191
A Novel Sensorless Capacitor Voltage Balancing Method for the Modular Multilevel DC Transformer With Diode-Clamped Circuits
This article proposed a novel sensorless capacitor voltage balancing method for the modular multilevel dc transformer (MMDCT), which is a promising solution for interconnecting dc grids. The MMDCT comprises two modular multilevel converters (MMCs) and a medium frequency transformer (MFT), where the MFT provides galvanic isolation between the input and output dc grids and the MMCs offer high-voltage handling capability. In order to produce medium frequency sine-wave voltages at the MFT terminals, the phase shift carrier pulsewidth modulation (PSC-PWM) is employed for the MMCs. Typically, a feedback controller is required for each submodule of the MMC to regulate the capacitor voltage to its nominal value, resulting in increased costs due to the requirement for a large number of voltage sensors and fiber optic transceivers. To address this issue, low power rating clamping circuits are implemented between each adjacent submodule of the MMC, and the capacitor charge differences caused by the PSC-PWM are analyzed. Sequential balancing and nonsequential balancing are proposed to achieve capacitor voltage self-balance. Both simulation and experiment results have shown that the capacitor voltages are well-balanced with the proposed method.
- 29 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 13545-13555
A Two-Step Event-Triggered-Based Data-Driven Predictive Control for Power Converters
Recently, event-triggered model predictive control (MPC) is addressed as a promising and powerful technique for power converter systems. The core idea behind this technique is to explicitly provide a feasible solution to reduce switching actions. However, it is prone to suffer from unknown uncertainties and large tracking error that hinder its potential when medium to high accuracy is desired. To tackle the difficulties caused by the uncertainties and tracking error, our work takes a step forward toward addressing a modified data-driven event-triggered model-free predictive control architecture leveraging a two-step event-triggered protocol subject to parametric uncertainties. Meanwhile, an integral error term is embedded into this proposal so as to enhance the tracking performance under low switching frequency (SF) operation. Compared to previous studies, we show that this modification not only endows with uncertainties and SF as well as tracking error attenuating capabilities but also inspires new works in the intersection of event-driven control technique and MPC theory, without requiring a priori knowledge of model dynamics and weighting factors. Finally, numerical examples illustrate the interest and efficacy of this proposal.
- 29 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 13545-13555
A Two-Step Event-Triggered-Based Data-Driven Predictive Control for Power Converters
Recently, event-triggered model predictive control (MPC) is addressed as a promising and powerful technique for power converter systems. The core idea behind this technique is to explicitly provide a feasible solution to reduce switching actions. However, it is prone to suffer from unknown uncertainties and large tracking error that hinder its potential when medium to high accuracy is desired. To tackle the difficulties caused by the uncertainties and tracking error, our work takes a step forward toward addressing a modified data-driven event-triggered model-free predictive control architecture leveraging a two-step event-triggered protocol subject to parametric uncertainties. Meanwhile, an integral error term is embedded into this proposal so as to enhance the tracking performance under low switching frequency (SF) operation. Compared to previous studies, we show that this modification not only endows with uncertainties and SF as well as tracking error attenuating capabilities but also inspires new works in the intersection of event-driven control technique and MPC theory, without requiring a priori knowledge of model dynamics and weighting factors. Finally, numerical examples illustrate the interest and efficacy of this proposal.
- 23 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (3) , 2227-2239
Online Estimation of Per-Phase Stator Resistance Based on DC-Signal Injection for Condition Monitoring in Multiphase Drives
Multiphase drives with high reliability are receiving increasing attention by the research community in safety-critical applications. Condition monitoring is an effective way to improve drive reliability, because it can detect the development of faults and offer the possibility of predictive maintenance. Among the different condition monitoring methods, online estimation of stator resistance is a promising technique for its ability to detect high-resistance connections, overheating of stator windings and other defects. In this article, an online estimation method of stator resistance based on dc-signal injection is proposed for multiphase drives. The dc currents are injected in the subspace with the smallest main inductance to minimize the induced torque ripple. Phase voltages are measured and the dc components are extracted to calculate the resistance in all the phases. Compared with existing methods, the proposed method can estimate the per-phase stator resistance with higher accuracy and higher robustness, which provides additional benefits in condition monitoring applications. In addition, the proposed method is derived in a general way, which makes it applicable to most kinds multiphase drive systems. Experimental results on a nine-phase induction machine and a five-phase induction machine validate the high accuracy, high robustness, and high generality of the proposed technique.
- 23 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (3) , 2227-2239
Online Estimation of Per-Phase Stator Resistance Based on DC-Signal Injection for Condition Monitoring in Multiphase Drives
Multiphase drives with high reliability are receiving increasing attention by the research community in safety-critical applications. Condition monitoring is an effective way to improve drive reliability, because it can detect the development of faults and offer the possibility of predictive maintenance. Among the different condition monitoring methods, online estimation of stator resistance is a promising technique for its ability to detect high-resistance connections, overheating of stator windings and other defects. In this article, an online estimation method of stator resistance based on dc-signal injection is proposed for multiphase drives. The dc currents are injected in the subspace with the smallest main inductance to minimize the induced torque ripple. Phase voltages are measured and the dc components are extracted to calculate the resistance in all the phases. Compared with existing methods, the proposed method can estimate the per-phase stator resistance with higher accuracy and higher robustness, which provides additional benefits in condition monitoring applications. In addition, the proposed method is derived in a general way, which makes it applicable to most kinds multiphase drive systems. Experimental results on a nine-phase induction machine and a five-phase induction machine validate the high accuracy, high robustness, and high generality of the proposed technique.
- Open Access
- 14 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 1, 355-366
A Fast Multilevel SVPWM Method Based on the Imaginary Coordinate With Direct Control of Redundant Vectors or Zero Sequence Components
This paper for the first time comprehensively presents a multilevel space vector pulse width modulation (SVPWM) method based on the imaginary coordinate system. This method is probably one of the most efficient methods in fast multilevel SVPWMs. It avoids trigonometric operation, look-up tables and only requires simple logic judgement and arithmetic calculation. A distinct advantage of this method over other coordinate-transformation-based methods is that it does not need to transform from the imaginary coordinate system back to the a-b-c (or $\alpha-\beta$ ) coordinate in order to select the redundant vectors using look-up tables. The redundant vectors or zero-sequence components are directly worked out in the proposed method, e.g. for balancing dc-link capacitor voltages, which avoids identifying the starting vector, vector rotation direction (clockwise or anti-clockwise), vector sequence, etc. as used in conventional methods. This paper entails each step to implement this SVPWM method, which can be replicated for multilevel converters with any number of voltage levels. The presented method has been used and validated by various converters, including a three-level and a five-level neutral-point-clamped converter. The archive value of this paper is that it demonstrates a milestone of fast multilevel SVPWM based on coordinate transformation.- 14 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 1, 355-366
Open AccessA Fast Multilevel SVPWM Method Based on the Imaginary Coordinate With Direct Control of Redundant Vectors or Zero Sequence Components
This paper for the first time comprehensively presents a multilevel space vector pulse width modulation (SVPWM) method based on the imaginary coordinate system. This method is probably one of the most efficient methods in fast multilevel SVPWMs. It avoids trigonometric operation, look-up tables and only requires simple logic judgement and arithmetic calculation. A distinct advantage of this method over other coordinate-transformation-based methods is that it does not need to transform from the imaginary coordinate system back to the a-b-c (or $\alpha-\beta$ ) coordinate in order to select the redundant vectors using look-up tables. The redundant vectors or zero-sequence components are directly worked out in the proposed method, e.g. for balancing dc-link capacitor voltages, which avoids identifying the starting vector, vector rotation direction (clockwise or anti-clockwise), vector sequence, etc. as used in conventional methods. This paper entails each step to implement this SVPWM method, which can be replicated for multilevel converters with any number of voltage levels. The presented method has been used and validated by various converters, including a three-level and a five-level neutral-point-clamped converter. The archive value of this paper is that it demonstrates a milestone of fast multilevel SVPWM based on coordinate transformation. - 3 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (2) , 1428-1440
Neutral-Point Voltage Balancing Method for Five-Level NPC Inverters Based on Carrier-Overlapped PWM
Neutral-point voltage imbalance is one of the main problems of five-level neutral-point clamped (NPC) inverters that impedes their industrial application. In order to solve this problem, a closed-loop neutral-point voltage balancing method based on carrier-overlapped PWM (COPWM) is proposed in this paper. The four DC-link capacitor voltages are balanced by three steps: voltage balancing between the two outer capacitors, voltage balancing between the two inner capacitors, and voltage balancing between the two inner and the two outer capacitors. The relationship between the neutral-point currents and the reference voltage is studied, and the top and the bottom DC-link capacitor voltages are balanced by zero-sequence voltage injection. The two inner capacitor voltages are balanced by adjusting the width of switching signals. Simulation and experimental results are presented to confirm the validity of this method.
- 3 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (2) , 1428-1440
Neutral-Point Voltage Balancing Method for Five-Level NPC Inverters Based on Carrier-Overlapped PWM
Neutral-point voltage imbalance is one of the main problems of five-level neutral-point clamped (NPC) inverters that impedes their industrial application. In order to solve this problem, a closed-loop neutral-point voltage balancing method based on carrier-overlapped PWM (COPWM) is proposed in this paper. The four DC-link capacitor voltages are balanced by three steps: voltage balancing between the two outer capacitors, voltage balancing between the two inner capacitors, and voltage balancing between the two inner and the two outer capacitors. The relationship between the neutral-point currents and the reference voltage is studied, and the top and the bottom DC-link capacitor voltages are balanced by zero-sequence voltage injection. The two inner capacitor voltages are balanced by adjusting the width of switching signals. Simulation and experimental results are presented to confirm the validity of this method.
- 27 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (9) , 9095-9106
A Generalized Carrier-Overlapped PWM Method for Neutral-Point-Clamped Multilevel Converters
The neutral-point voltage unbalance problem holds back the extensive application of neutral-point clamped (NPC) multilevel converters with more than three voltage levels in industry. Traditional phase-disposition PWM (PDPWM) or nearest-three-vectors (NTV) modulation cannot achieve the voltage balance over the full modulation indexes and load power factors when the voltage level is higher than three. To solve this problem, a novel generalized carrier-based PWM method named carrier-overlapped PWM (COPWM) for NPC multilevel converters is proposed in this paper, which is proved to satisfy the volt-second balance principle. With this modulation method, the average values of all the neutral-point currents equal to zero in a fundamental period, and so all the dc-link capacitor voltages can be naturally balanced in the ideal and steady-state conditions. In order to simplify its implementation, an equivalent multi-reference modulation method with only one triangular carrier is also derived. Simulation and experimental results on a five-level diode-clamped inverter are presented to verify the proposed modulation method.
- 27 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (9) , 9095-9106
A Generalized Carrier-Overlapped PWM Method for Neutral-Point-Clamped Multilevel Converters
The neutral-point voltage unbalance problem holds back the extensive application of neutral-point clamped (NPC) multilevel converters with more than three voltage levels in industry. Traditional phase-disposition PWM (PDPWM) or nearest-three-vectors (NTV) modulation cannot achieve the voltage balance over the full modulation indexes and load power factors when the voltage level is higher than three. To solve this problem, a novel generalized carrier-based PWM method named carrier-overlapped PWM (COPWM) for NPC multilevel converters is proposed in this paper, which is proved to satisfy the volt-second balance principle. With this modulation method, the average values of all the neutral-point currents equal to zero in a fundamental period, and so all the dc-link capacitor voltages can be naturally balanced in the ideal and steady-state conditions. In order to simplify its implementation, an equivalent multi-reference modulation method with only one triangular carrier is also derived. Simulation and experimental results on a five-level diode-clamped inverter are presented to verify the proposed modulation method.
- 23 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 7910-7920
A Comprehensive Study of Common Mode Voltage Reduction and Neutral Point Potential Balance for a Back-to-Back Three-Level NPC Converter
A comprehensive study of common mode voltage (CMV) reduction and neutral point (NP) potential balance for a back-to-back three-level (3L) NPC converter is proposed in this paper. Based on phase-disposition PWM (PDPWM), a zero-sequence voltage (ZSV) injection method is adopted. The ZSV is divided into two parts, ZSV for CMV reduction and ZSV for NP potential balance. The specific selection method is discussed in detail in this paper. After using the proposed ZSV injection method, the CMV can be reduced to 1/6 of the DC bus voltage, and the NP potential fluctuations can also be suppressed. Simulation and experimental results verify the effectiveness of the proposed method.
- 23 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 7910-7920
A Comprehensive Study of Common Mode Voltage Reduction and Neutral Point Potential Balance for a Back-to-Back Three-Level NPC Converter
A comprehensive study of common mode voltage (CMV) reduction and neutral point (NP) potential balance for a back-to-back three-level (3L) NPC converter is proposed in this paper. Based on phase-disposition PWM (PDPWM), a zero-sequence voltage (ZSV) injection method is adopted. The ZSV is divided into two parts, ZSV for CMV reduction and ZSV for NP potential balance. The specific selection method is discussed in detail in this paper. After using the proposed ZSV injection method, the CMV can be reduced to 1/6 of the DC bus voltage, and the NP potential fluctuations can also be suppressed. Simulation and experimental results verify the effectiveness of the proposed method.
- 22 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (1) , 455-464
An Improved Phase-Shifted PWM for a Five-Level Hybrid-Clamped Converter With Optimized THD
- 22 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 56 (1) , 455-464
An Improved Phase-Shifted PWM for a Five-Level Hybrid-Clamped Converter With Optimized THD
- 4 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (1) , 7-12
A Novel Carrier-Overlapped PWM Method for Four-Level Neutral-Point Clamped Converters
Neutral-point clamped multilevel converters with more than three voltage levels are hard to balance the DC-link capacitor voltages, which limits their application in industry. In order to solve the neutral-point potential balancing problem of four-level neutral-point clamped converters, a novel carrier-overlapped PWM method is proposed in this letter, which satisfies the volt-second balance principle and can achieve the natural voltage balance of three DC-link capacitors under ideal and steady states. Experimental results are presented to confirm the validity of this PWM method.
- 4 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (1) , 7-12
A Novel Carrier-Overlapped PWM Method for Four-Level Neutral-Point Clamped Converters
Neutral-point clamped multilevel converters with more than three voltage levels are hard to balance the DC-link capacitor voltages, which limits their application in industry. In order to solve the neutral-point potential balancing problem of four-level neutral-point clamped converters, a novel carrier-overlapped PWM method is proposed in this letter, which satisfies the volt-second balance principle and can achieve the natural voltage balance of three DC-link capacitors under ideal and steady states. Experimental results are presented to confirm the validity of this PWM method.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 1851-1855
High Performance PMSM Sensorless Control with Load Torque Observation
This paper proposes a new state observer based on extended Kalman filter (EKF) for the sensorless control of permanent magnet synchronous motors (PMSM). The observer can obtain exact rotor speed and position with which sensorless control can be achieved. Load torque is also observed and used as the feed-forward compensation to improve the system performance during load torque changes. In this system, the initial rotor position is not necessary for the start up. Based on the observed variables, a state space position control controller is built up. Simulations and experiments have been done to verify the performances of the system.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 1851-1855
High Performance PMSM Sensorless Control with Load Torque Observation
This paper proposes a new state observer based on extended Kalman filter (EKF) for the sensorless control of permanent magnet synchronous motors (PMSM). The observer can obtain exact rotor speed and position with which sensorless control can be achieved. Load torque is also observed and used as the feed-forward compensation to improve the system performance during load torque changes. In this system, the initial rotor position is not necessary for the start up. Based on the observed variables, a state space position control controller is built up. Simulations and experiments have been done to verify the performances of the system.