Nonisothermal modeling of heat transfer inside an internal batch mixer
- 3 November 2010
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 57 (10) , 2657-2669
Abstract
A nonisothermal transient process of temperature increase due to viscous heating was simulated for a 69 cm3 internal batch mixer (BM) using a computational fluid dynamics (CFD) software, Polyflow 3.9 form ANSYS, Inc., to obtain the temporal temperature distribution and characterize the heat transfer between polymer melt and mixer wall. The melt temperature obtained from simulation was verified with experiments. Starting from a uniform temperature of 463 K, when a rotation speed of 5.24 rad/s is imposed, viscous heating caused a maximum temperature rise of 3 K for a polyethylene (PE) resin, and 6 K for a polystyrene (PS) resin. The transient flow fields inside the batch mixer were characterized with velocity profiles and a mixing index parameter, which show that laminar flow dominates inside the mixer while a small percentage of elongational flow, converging flow, and recirculation flow is also present. © 2010 American Institute of Chemical Engineers AIChE J, 2011Keywords
This publication has 31 references indexed in Scilit:
- Impact of processing history on rheological properties for branched polypropylenePolymer, 2006
- Dispersion, temperature and torque models for an internal mixerPolymer Engineering & Science, 2004
- Finite element solutions of heat transfer in molten polymer flow in tubes with viscous dissipationInternational Journal of Heat and Mass Transfer, 2003
- Rheological properties of LDPE processed by conventional processing machinesAdvances in Polymer Technology, 2003
- Measurement of the temperature rise in non-Newtonian oscillatory pipe flowsJournal of Non-Newtonian Fluid Mechanics, 2003
- A two‐zone melting model for polymer blends in a batch mixerPolymer Engineering & Science, 2001
- Determination of shear rate and viscosity from batch mixer dataJournal of Rheology, 1999
- Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and CompatibilizationMacromolecules, 1995
- Studies of Mixing Efficiency in Batch and Continuous MixersRubber Chemistry and Technology, 1994
- Processing Conditions in the Batch-Operated Internal MixerRubber Chemistry and Technology, 1975