Mathematical Modelling of the Initial Mold Filling with Utilization of an Angled Runner
Open Access
Abstract
The flow pattern plays a crucial role in the uphill teeming process. The non-metallic inclusion generation due to interaction with the mold flux is believed to be influenced by the flow pattern. In this study, a three-dimensional mathematical model of the filling of a gating system for 10, 20, and 30 degrees angled runners was used to predict the fluid flow characteristics. Moreover, a mathematical model with a horizontal runner was applied as a reference. The predictions indicate that the angled-runner-design decreases the hump height during the initial filling stage, which results in less entrapment of mold flux into the mold. Nevertheless, increasing the angle of runner can result in a lower hump height, while the 30 degree angled runner gives a much more stable increase of the hump height during the initial filling stage. Besides CFD calculations, some thermodynamic calculations are taken into account for the chemical reactions between liquid steel and gas. The results show that the bubble shrinks due to the fact that N and O are dissolved into steel. The present findings strongly suggest that changing the horizontal runner to an angled runner would be an effective means of reducing flow unevenness during the initial filling of ingots, if the added steel losses are deemed acceptable.Keywords
This publication has 22 references indexed in Scilit:
- Modelling of ingot size effects on macrosegregation in steel castingsJournal of Materials Processing Technology, 2018
- Comprehensive Numerical Simulation of Filling and Solidification of Steel IngotsMaterials, 2016
- Modeling of Initial Mold Filling with Utilization of Swirl BladesISIJ International, 2012
- Influence of mould design on the solidification of heavy forging ingots of low alloy steels by numerical simulationMaterials & Design (1980-2015), 2010
- Effects of mould filling on evolution of the solid–liquid interface during solidificationApplied Thermal Engineering, 2009
- Large Inclusions in Plain-carbon Steel Ingots Cast by Bottom TeemingISIJ International, 2006
- Effect of Entrance Nozzle Design on the Fluid Flow in an Ingot Mold during FillingISIJ International, 2004
- Determination of macroinclusions during clean steel productionIronmaking & Steelmaking: Processes, Products and Applications, 2003
- Silicon ingot casting: process development by numerical simulationsSolar Energy Materials and Solar Cells, 2002
- The hydraulic jump in circular jet impingement and in other thin liquid filmsExperiments in Fluids, 1993