Microstructure and Mechanical Properties of Selective Laser Melted Reduced Activation Ferritic/Martensitic Steel
Authors:
- Zihao YuanZYZihao Yuan
- Xuejing SunXSXuejing Sun
- Guangyi ZhaoGZGuangyi Zhao
- Shaobo GongSGShaobo Gong
- Hongbin LiaoHLHongbin Liao
- Wei QianWQWei Qian
- Huajie WangHWHuajie Wang
Preprint
- 1 January 2022
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The cube and tensile samples of reduced activation ferritic/martensitic steel were formed at different laser powers and scanning velocities using selective laser melting process, and the microstructural characteristics and tensile properties of the cube and tensile samples were analyzed in this study. The experimental results shown that the SLMed CLF-1 samples formed with selected laser melting have near-fully dense, and the relative density of SLMed CLF-1 samples exceeds 99%. Meanwhile, numerous nano-sized spherical and needle-like precipitates dispersion distributed in the grains and the boundary of the grains, and the precipitates are mainly composed of M 23 C 6 carbide and MX carbide. The microstructure is that columnar grains and equiaxed grains arranged in sequence, and the smallest average size of grains is 15 µm at the 320 W power with 800 mm/s scanning velocity. In addition, the sample at 320 W power with 800 mm/s scanning velocity exhibits higher yield strength (875 Mpa) and higher elongation (25.6%) than that of the sample at 200 W power with 800 mm/s scanning velocity with yield strength (715 Mpa) and elongation (22.6%).Keywords
This publication has 20 references indexed in Scilit:
- Technical issues related to the development of reduced-activation ferritic/martensitic steels as structural materials for a fusion blanket systemFusion Engineering and Design, 2011
- Precipitation behavior of Laves phase in 10%Cr steel X12CrMoWVNbN10-1-1 during short-term creep exposureMaterials Science and Engineering: A, 2010
- A pragmatic model for selective laser melting with evaporationActa Materialia, 2009
- Ferritic/martensitic steels for advanced nuclear reactorsTransactions of the Indian Institute of Metals, 2009
- Microstructure and interface interaction in laser induction hybrid cladding of Ni-based coatingApplied Surface Science, 2009
- Recent Developments in Irradiation-Resistant SteelsAnnual Review of Materials Research, 2008
- Ferritic/martensitic steels for next-generation reactorsJournal of Nuclear Materials, 2007
- Rebuilding of metal components with laser cladding formingApplied Surface Science, 2006
- Effect of carbon concentration on precipitation behavior of M23C6 carbides and MX carbonitrides in martensitic 9Cr steel during heat treatmentMetallurgical and Materials Transactions A, 2004
- Low activation materials for fusion applicationsJournal of Nuclear Materials, 1984