Chemical and Morphological Characteristics of ALD Al2O3Thin-Film Surfaces after Immersion in pH Buffer Solutions
- 25 July 2013
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (10) , B201-B206
Abstract
The chemical and morphological properties of thin aluminum oxide film surfaces (Al2O3 having 10 nm in thickness) in the as-deposited (dry) and after immersion (in pH buffer solutions) conditions were studied. Careful measurement conditions have been followed in order to determine any possible physical and/or chemical change on the surface of these films (after immersion in pH), so that proper correlation to their high and stable sensitivity to pH is possible. After deposition of thin Al2O3 films (by Atomic Layer Deposition, ALD) on chemically oxidized p-type silicon wafers, the resulting Al2O3/SiOX/Si stacked structures were characterized by Fourier-Transform Infrared Spectroscopy (FTIR) and Atomic Force Microscopy (AFM) before and after immersion in pH buffer solutions. Also, the Capacitance-Voltage (C-V) and Current-Voltage (I-V) characteristics were obtained after fabrication of Metal-Insulator-Semiconductor (MIS) devices in order to correlate the good chemical and morphological characteristics of thin Al2O3 to its electrical properties. Based on the characterization results, low surface oxidation/dissolution mechanisms are found in ALD aluminum oxide films when immersed in pH buffer solutions during short immersion times (immersion time ≤ 10 minutes); therefore, leading to the characteristic slow degradation of the sensitivity to pH for this dielectric material.Keywords
This publication has 29 references indexed in Scilit:
- Integration of MOSFET/MIM Structures Using a CMOS-Based Technology for pH Detection Applications with High-SensitivityProcedia Chemistry, 2012
- Exploiting CMOS Technology to Enhance the Performance of ISFET SensorsIEEE Electron Device Letters, 2010
- Al2O3 Atomic Layer Deposition with Trimethylaluminum and Ozone Studied by in Situ Transmission FTIR Spectroscopy and Quadrupole Mass SpectrometryThe Journal of Physical Chemistry C, 2008
- ALD and Characterization of Aluminum Oxide Deposited on Si(100) using Tris(diethylamino) Aluminum and Water VaporJournal of the Electrochemical Society, 2006
- Growth mechanism and characterization of chemical oxide films produced in peroxide mixtures on Si(100) surfacesThin Solid Films, 2005
- Atomic Layer Deposition of Al2O3 Films on Polyethylene ParticlesChemistry of Materials, 2004
- Analytical characteristics and sensitivity mechanisms of electrolyte-insulator-semiconductor system-based chemical sensors?a critical reviewAnalytical and Bioanalytical Chemistry, 2003
- The influence of surface oxidation on the pH-sensing properties of silicon nitrideSensors and Actuators B: Chemical, 1999
- A process for the combined fabrication of ion sensors and CMOS circuitsIEEE Electron Device Letters, 1988
- Infra-red spectra of inorganic aluminates and characteristic vibrational frequencies of AlO4 tetrahedra and AlO6 octahedraSpectrochimica Acta Part A: Molecular Spectroscopy, 1967