PRPedro Rosales

Pedro Rosales

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pedro Rosales has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nonlinear effects and applications of AlN: A comprehensive physical formulation approach

    by Andres Felipe Jaramillo Alvarado, Alfonso Torres Jacome, Pedro Rosales, Gerardo Diaz Arango, Hector Vazquez Leal

    Piezoelectric materials have nonlinear effects that can be used in 5G and IoT technologies. However, since most nonlinear problems in this area do not have analytic solutions, FEM simulations are an essential design tool. In this study, we have developed a stress-charge formulation for non-linear piezoelectric materials compatible with commonly used simulation tools in industry and research. FEM simulation results for AlN with three nonlinear phenomena are presented: variation of effective electrical permittivity, shift of the effective elasticity constants, and enhancement of electromechanical coupling factor. These simulations were conducted with the same material parameters, having great agreement with recent and important experimental results. The simulations allow us to deduce the values of the components of the high-order tensors for the first time as qr_331 = qr_333 = −1600 and g_333 = −80N/V m. The maximum percent errors obtained for the simulations of the effective electrical permittivity and effective elasticity constants were 0.1% and 1.77%, respectively.

  • Open Access

    Effect of the RF Power of PECVD on the Crystalline Fractions of Microcrystalline Silicon (μc-Si:H) Films and Their Structural, Optical, and Electronic Properties

    by Mario Moreno, Arturo Torres-Sánchez, Pedro Rosales, Alfredo Morales, Alfonso Torres, Javier Flores, Luis Hernández, Carlos Zúñiga, Carlos Ascencio, Alba Arenas

    In this work, we report on the deposition of microcrystalline silicon (µc-Si:H) films produced from silane (SiH4), hydrogen (H2), and argon (Ar) mixtures using the plasma-enhanced chemical vapor deposition (PECVD) technique at 200 °C. Particularly, we studied the effect of RF power on the crystalline fraction (XC) of the deposited films, and we have correlated the XC with their optical, electrical, and structural characteristics. Different types of characterization were performed in the µc-Si:H film series. We used several techniques, such as Raman scattering spectroscopy, Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM), among others. Our results show that RF power had a strong effect on the XC of the films, and there is an optimal value for producing films with the largest XC.


  • Open Access

    Stress–Charge Nonlinear Physical Description and Tensor Symmetries for Piezoelectric Materials

    by A. F. Jaramillo-Alvarado, A. Torres Jacome, P. Rosales-Quintero, H. Vazquez-Leal, G. Diaz-Arango, J. Huerta-Chua, J. Martínez-Castillo

    Nonlinear piezoelectric materials are raised as a great replacement for devices that require low power consumption, high sensitivity, and accurate transduction, fitting with the demanding requirements of new technologies such as the Fifth-Generation of telecommunications (5G), the Internet of Things (IoT), and modern radio frequency (RF) applications. In this work, the state equations that correctly predict the nonlinear piezoelectric phenomena observed experimentally are presented. Furthermore, we developed a fast methodology to implement the state equations in the main FEM simulation software, allowing an easy design and characterization of this type of device, as the symmetry structures for high-order tensors are shown and explained. The operation regime of each high-order tensor is discussed and connected with the main nonlinear phenomena reported in the literature. Finally, to demonstrate our theoretical deductions, we used the experimental measurements, which presented the nonlinear effects, which were reproduced through simulations, obtaining maximum percent errors for the effective elasticity constants, relative effective permittivity, and resonance frequencies of 0.79%, 2.9%, and 0.3%, respectively, giving a proof of the potential of the nonlinear state equations presented for the unifying of all nonlinear phenomena observed in the piezoelectric devices.


  • Open Access

    Solar Cell Parameter Extraction Method from Illumination and Dark I-V Characteristics

    by Fredy Montalvo-Galicia, María Teresa Sanz-Pascual, Pedro Rosales-Quintero, Mario Moreno-Moreno

    A novel method to extract the seven parameters of the double-diode model of solar cells using the current–voltage (I-V) characteristics under illumination and in the dark is presented. The algorithm consists of two subroutines which are alternatively run to adjust all the parameters of the cell in an iterative process. Curve fitting of the light I-V characteristics ensures accuracy in the prediction of the maximum power point, whereas simultaneously fitting the dark I-V characteristics results in a set of physically meaningful parameters that provide information about the physical performance of the photovoltaic devices. Experimental I-V curves of in-house solar cells are used to validate the proposed parameter extraction method, which can be furthermore applied to other types of p–n junction-based photovoltaic devices.


  • Performance Characterization of Infrared Detectors Based on Polymorphous Silicon‐Germanium (pm‐SixGe1−x:H) Thin Films Deposited at Low Temperature

    by Ricardo Jiménez, Mario Moreno, Alfonso Torres, Pedro Rosales, María T. Sanz, Roberto Ambrosio

    In this work, the fabrication of infrared detectors (uncooled microbolometers) using surface micromachining techniques is presented. The thermo‐sensing film used in the devices is polymorphous silicon‐germanium (pm‐SixGe1−x:H) produced by low frequency plasma‐enhanced chemical vapor deposition (PECVD) at low temperature (200 °C). Polymorphous semiconductors basically are amorphous semiconductors with embedded nanocrystals (of diameter of about 2–5 nm), which are formed during the film deposition. The presence of nanocrystals impacts on the properties of the material by reducing the density of states (defects) and improving the stability of the films. For infrared detectors those materials present important properties such as high temperature coefficient of resistance (TCR = −4.7% K−1), long‐term stability, low deposition temperature, and silicon CMOS compatibility. Test structures with size of 50 × 50 μm2 and different thermal isolation designs are characterized under IR radiation (0.7–20 μm) in a frequency range of 5–100 Hz. From voltage responsivity and noise measurements, the specific detectivity is calculated achieving values of 1 × 108 cm Hz1/2 W−1 and thermal response time of 8–9 ms under 150 nA bias current. The above characteristics make those devices very suitable for the development of infrared focal plane arrays (IRFPAs).


  • Influence of the surface roughness of the bottom electrode on the resistive-switching characteristics of Al/Al2O3/Al and Al/Al2O3/W structures fabricated on glass at 300 °C

    by Joel Molina, Rene Valderrama, Carlos Zuniga, Pedro Rosales, Wilfrido Calleja, Alfonso Torres, Javier DeLa Hidalga, Edmundo Gutierrez


  • Planarized ambipolar a-SiGe:H thin-film transistors: Influence of the sequence of fabrication process

    by Miguel Dominguez, Pedro Rosales, Alfonso Torres, Francisco Flores, Joel Molina, Mario Moreno, Jose Luna, Abdu Orduña


  • Open Access

    Fowler-Nordheim Tunneling Characterization on Poly1-Poly2 Capacitors for the Implementation of Analog Memories in CMOS 0.5 μmTechnology

    by Enrique J. Tinajero-Perez, Jesus Ezequiel Molinar-Solis, Rodolfo Z. Garcia-Lozano, Pedro Rosales-Quintero, Jose M. Rocha-Perez, Alejandro Diaz-Sanchez, Arturo Morales-Acevedo

    The experimental results of the Fowler-Nordheim characterization using poly1-poly2 capacitors on CMOS ON Semi 0.5 μm technology are presented. This characterization allows the development, design, and characterization of a new current-mode analog nonvolatile memory. Experimental results of the memory cell architecture are presented and demonstrate the usefulness of the proposed architecture.


  • Chemical and Morphological Characteristics of ALD Al2O3Thin-Film Surfaces after Immersion in pH Buffer Solutions

    by Joel Molina Reyes, Berni M. Perez Ramos, Carlos Zuñiga Islas, Wilfrido Calleja Arriaga, Pedro Rosales Quintero, Alfonso Torres Jacome

    The chemical and morphological properties of thin aluminum oxide film surfaces (Al2O3 having 10 nm in thickness) in the as-deposited (dry) and after immersion (in pH buffer solutions) conditions were studied. Careful measurement conditions have been followed in order to determine any possible physical and/or chemical change on the surface of these films (after immersion in pH), so that proper correlation to their high and stable sensitivity to pH is possible. After deposition of thin Al2O3 films (by Atomic Layer Deposition, ALD) on chemically oxidized p-type silicon wafers, the resulting Al2O3/SiOX/Si stacked structures were characterized by Fourier-Transform Infrared Spectroscopy (FTIR) and Atomic Force Microscopy (AFM) before and after immersion in pH buffer solutions. Also, the Capacitance-Voltage (C-V) and Current-Voltage (I-V) characteristics were obtained after fabrication of Metal-Insulator-Semiconductor (MIS) devices in order to correlate the good chemical and morphological characteristics of thin Al2O3 to its electrical properties. Based on the characterization results, low surface oxidation/dissolution mechanisms are found in ALD aluminum oxide films when immersed in pH buffer solutions during short immersion times (immersion time ≤ 10 minutes); therefore, leading to the characteristic slow degradation of the sensitivity to pH for this dielectric material.