Effect of LN2 Sloshing on the Lateral Dynamic of HTS Pinning Maglev
- 12 September 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (9) , 1-9
Abstract
As an innovative maglev system, the high-temperature superconducting (HTS) pinning magnetic levitation (maglev) train achieves levitation and guidance through the interaction between the HTS bulks in the levitator and the permanent magnet guideway. To ensure that the HTS pinning maglev maintains a stable levitation working state, the ambient temperature of the HTS bulk must remain below its critical temperature. The current method is injecting liquid nitrogen (LN 2 ) into the levitator's liquid tank for cooling. However, due to heat transfer, LN 2 in the tank is not always fully replenished. External disturbances can cause LN 2 sloshing, which affects the vehicle's dynamic performance. This issue remains underexplored by scholars. In this article, LN 2 excitation is integrated into studying the dynamic performance of HTS pinning maglev for the first time. First, a spring–mass model is established to deal with the LN 2 sloshing in the levitator equivalently. Computational fluid dynamics software verifies the feasibility of this model. The equivalent model is then integrated into the vehicle system to develop an HTS pinning vehicle dynamics model, which is validated by experimental data. Subsequently, the dynamic response of the vehicle and the levitators considering the LN 2 sloshing is analyzed. Finally, the optimal LN 2 filling ratio in the levitator is proposed from the perspective of dynamic performance optimization. The results show that the LN 2 sloshing in the levitator has a particular influence on the lateral vibration, lateral displacement, and roll angle of the HTS pinning maglev vehicle. In addition, it is recommended to replenish LN 2 when the filling ratio inside the levitator reaches 70%. This work enhances the understanding of the dynamic response of HTS pinning maglev trains under multiple excitations and provides a reference for refining HTS pinning maglev modeling.Keywords
Funding Information
- National Natural Science Foundation of China (U23A20681)
- Sichuan Science and Technology Program (2023ZYD0021, 2022JDTD0011)
- Fundamental Research Funds for the Central Universities (2682023CG010)
- Research and Development Project of JDD for High-Temperature Superconducting Maglev Transportation System in 2024 (JDDKYCF2024002)
This publication has 28 references indexed in Scilit:
- Sloshing Dynamics in Sway Excited Rectangular Scaled TanksJournal of Marine Science and Application, 2023
- Dynamic guidance performance of HTS bulk under varying external magnetic fieldSuperconductor Science and Technology, 2022
- Design and Implementation of auto-filling liquid nitrogen for HTS maglev vehicles based on Kalman filter algorithmCryogenics, 2020
- Response regimes in equivalent mechanical model of moderately nonlinear liquid sloshingNonlinear Dynamics, 2018
- A High-Temperature Superconducting Maglev Ring Test Line Developed in Chengdu, ChinaIEEE Transactions on Applied Superconductivity, 2016
- Experiments of Superconducting Maglev Ground TransportationIEEE Transactions on Applied Superconductivity, 2016
- Impact of liquid sloshing on the behaviour of vehicles carrying liquid cargoEuropean Journal of Mechanics - A/Solids, 2009
- Liquid Sloshing Dynamics2005
- Calculation of the hysteretic force between a superconductor and a magnetPhysical Review B, 2002
- Friction in levitated superconductorsApplied Physics Letters, 1988