Xucheng Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Xucheng Zhou has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Zigang Deng
Southwest Jiaotong University
10 shared publications - Can Peng
School of Information Science and Technology, Southwest Jiaotong University, Chengdu 610031, People’s Republic of China
3 shared publications - Haitao Li
State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu, China
3 shared publications - Li Wang
National Laboratory for Rail Transportation, Southwest Jiaotong University, Chengdu, China
2 shared publications Weihua Zhang
State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University 1 , Chengdu 610031
2 shared publications- Xianhong Hu
School of Mechanics and Aerospace Engineering, Southwest Jiaotong University, Chengdu, China
2 shared publications
Latest Publications
- Open Access
- 2 June 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (21)
Nonlinear vibration behaviors of HTS levitation system under different load-levitation ratios
High-temperature superconducting (HTS) pinning maglev trains, with their self-stabilizing levitation and low magnetic resistance, are promising candidates for future transportation. This paper investigates the nonlinear vibration behaviors of the single levitation system of the world’s first HTS high-speed maglev train under different load-levitation ratios (LLRs). First, vertical free vibration experiments were conducted under various load conditions, obtaining response curves for stable levitation height, main vibration frequency, stiffness, and damping with various loads. Based on these results, a set of equivalent stiffness and damping parameters for different LLRs was compiled. Second, focusing on three specific LLR conditions, levitation force curves were fitted using experimental data. The system’s stability and nonlinear vibration characteristics were analyzed through theoretical, numerical, and experimental methods. The experimental results show that the stable levitation height decreases nonlinearly as the load increases and stabilizes at 10 mm under rated load conditions. The system’s natural frequency remains nearly constant, showing minimal sensitivity to load changes. Both equivalent stiffness and damping increase with load. The analysis reveals that the HTS levitation system exhibits inherent stability and can recover balance after transient disturbances. It also shows nonlinear dynamics behavior such as period-doubling bifurcation and harmonic resonance, influenced significantly by excitation frequency, amplitude, and LLRs. These phenomena are more pronounced with larger LLR. Under certain conditions, the system exhibits jump phenomena. Resonance primarily occurs in the primary and double-frequency bands. This study enhances the understanding of HTS system dynamics and provides a reference for the dynamic research of HTS pinning maglev trains.
- 2 June 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (21)
Open AccessNonlinear vibration behaviors of HTS levitation system under different load-levitation ratios
High-temperature superconducting (HTS) pinning maglev trains, with their self-stabilizing levitation and low magnetic resistance, are promising candidates for future transportation. This paper investigates the nonlinear vibration behaviors of the single levitation system of the world’s first HTS high-speed maglev train under different load-levitation ratios (LLRs). First, vertical free vibration experiments were conducted under various load conditions, obtaining response curves for stable levitation height, main vibration frequency, stiffness, and damping with various loads. Based on these results, a set of equivalent stiffness and damping parameters for different LLRs was compiled. Second, focusing on three specific LLR conditions, levitation force curves were fitted using experimental data. The system’s stability and nonlinear vibration characteristics were analyzed through theoretical, numerical, and experimental methods. The experimental results show that the stable levitation height decreases nonlinearly as the load increases and stabilizes at 10 mm under rated load conditions. The system’s natural frequency remains nearly constant, showing minimal sensitivity to load changes. Both equivalent stiffness and damping increase with load. The analysis reveals that the HTS levitation system exhibits inherent stability and can recover balance after transient disturbances. It also shows nonlinear dynamics behavior such as period-doubling bifurcation and harmonic resonance, influenced significantly by excitation frequency, amplitude, and LLRs. These phenomena are more pronounced with larger LLR. Under certain conditions, the system exhibits jump phenomena. Resonance primarily occurs in the primary and double-frequency bands. This study enhances the understanding of HTS system dynamics and provides a reference for the dynamic research of HTS pinning maglev trains.
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
Levitation Performance Evolution of HTS Maglev Systems Under Thermally Induced Magnetic Irregularities in Permanent Magnet Guideways
The flux pinning between the high-temperature superconducting (HTS) bulks and the permanent magnet guideway (PMG) ensures the stable levitation of HTS maglev. Environmental parameters impact the temperature field of the HTS maglev rail beam, while thermal-magnetic effects cause magnetic field decay and fluctuations above the PMG, leading to additional excitation on the HTS maglev vehicle. This paper develops a heat transfer model based on three months of PMG temperature measurements from an HTS maglev test line. A thermal-magnetic coupling model for the PMG is also constructed to link environmental parameters with HTS maglev levitation performance. The analysis presented here identifies 22.69% irreversible demagnetization and 5.72% reversible magnetic field fluctuations, contributing to periodic changes in levitation performance. The proposed calculation method and measurement approach provide valuable references for the state identification, operational maintenance, and safety management of maglev systems.
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
Levitation Performance Evolution of HTS Maglev Systems Under Thermally Induced Magnetic Irregularities in Permanent Magnet Guideways
The flux pinning between the high-temperature superconducting (HTS) bulks and the permanent magnet guideway (PMG) ensures the stable levitation of HTS maglev. Environmental parameters impact the temperature field of the HTS maglev rail beam, while thermal-magnetic effects cause magnetic field decay and fluctuations above the PMG, leading to additional excitation on the HTS maglev vehicle. This paper develops a heat transfer model based on three months of PMG temperature measurements from an HTS maglev test line. A thermal-magnetic coupling model for the PMG is also constructed to link environmental parameters with HTS maglev levitation performance. The analysis presented here identifies 22.69% irreversible demagnetization and 5.72% reversible magnetic field fluctuations, contributing to periodic changes in levitation performance. The proposed calculation method and measurement approach provide valuable references for the state identification, operational maintenance, and safety management of maglev systems.
- 1 November 2024
- Published by Springer Nature
- p. 597-604
The Effect of Dewar Metal Shell on the Dynamic Characteristics of HTS Pinning Maglev System
- 1 November 2024
- Published by Springer Nature
- p. 597-604
The Effect of Dewar Metal Shell on the Dynamic Characteristics of HTS Pinning Maglev System
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (9) , 1-9
Effect of LN2 Sloshing on the Lateral Dynamic of HTS Pinning Maglev
As an innovative maglev system, the high-temperature superconducting (HTS) pinning magnetic levitation (maglev) train achieves levitation and guidance through the interaction between the HTS bulks in the levitator and the permanent magnet guideway. To ensure that the HTS pinning maglev maintains a stable levitation working state, the ambient temperature of the HTS bulk must remain below its critical temperature. The current method is injecting liquid nitrogen (LN 2 ) into the levitator's liquid tank for cooling. However, due to heat transfer, LN 2 in the tank is not always fully replenished. External disturbances can cause LN 2 sloshing, which affects the vehicle's dynamic performance. This issue remains underexplored by scholars. In this article, LN 2 excitation is integrated into studying the dynamic performance of HTS pinning maglev for the first time. First, a spring–mass model is established to deal with the LN 2 sloshing in the levitator equivalently. Computational fluid dynamics software verifies the feasibility of this model. The equivalent model is then integrated into the vehicle system to develop an HTS pinning vehicle dynamics model, which is validated by experimental data. Subsequently, the dynamic response of the vehicle and the levitators considering the LN 2 sloshing is analyzed. Finally, the optimal LN 2 filling ratio in the levitator is proposed from the perspective of dynamic performance optimization. The results show that the LN 2 sloshing in the levitator has a particular influence on the lateral vibration, lateral displacement, and roll angle of the HTS pinning maglev vehicle. In addition, it is recommended to replenish LN 2 when the filling ratio inside the levitator reaches 70%. This work enhances the understanding of the dynamic response of HTS pinning maglev trains under multiple excitations and provides a reference for refining HTS pinning maglev modeling.
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (9) , 1-9
Effect of LN2 Sloshing on the Lateral Dynamic of HTS Pinning Maglev
As an innovative maglev system, the high-temperature superconducting (HTS) pinning magnetic levitation (maglev) train achieves levitation and guidance through the interaction between the HTS bulks in the levitator and the permanent magnet guideway. To ensure that the HTS pinning maglev maintains a stable levitation working state, the ambient temperature of the HTS bulk must remain below its critical temperature. The current method is injecting liquid nitrogen (LN 2 ) into the levitator's liquid tank for cooling. However, due to heat transfer, LN 2 in the tank is not always fully replenished. External disturbances can cause LN 2 sloshing, which affects the vehicle's dynamic performance. This issue remains underexplored by scholars. In this article, LN 2 excitation is integrated into studying the dynamic performance of HTS pinning maglev for the first time. First, a spring–mass model is established to deal with the LN 2 sloshing in the levitator equivalently. Computational fluid dynamics software verifies the feasibility of this model. The equivalent model is then integrated into the vehicle system to develop an HTS pinning vehicle dynamics model, which is validated by experimental data. Subsequently, the dynamic response of the vehicle and the levitators considering the LN 2 sloshing is analyzed. Finally, the optimal LN 2 filling ratio in the levitator is proposed from the perspective of dynamic performance optimization. The results show that the LN 2 sloshing in the levitator has a particular influence on the lateral vibration, lateral displacement, and roll angle of the HTS pinning maglev vehicle. In addition, it is recommended to replenish LN 2 when the filling ratio inside the levitator reaches 70%. This work enhances the understanding of the dynamic response of HTS pinning maglev trains under multiple excitations and provides a reference for refining HTS pinning maglev modeling.
- 4 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105220
Modeling and dynamic performance of distributed force in high-temperature superconducting pinning magnetic levitation
High-temperature superconducting (HTS) pinning magnetic levitation (maglev) systems are highly promising for future applications in rail transportation. Through the interaction between onboard HTS bulks and the permanent magnet guideway (PMG), this system generates levitation and guidance forces, known as the HTS-PMG relationship. Under practical conditions, this interaction manifests itself as a distributed force. However, past models have only considered concentrated forces. This study aims to design experiments to investigate the HTS-PMG relationship and propose a more realistic discretized lateral-vertical coupling HTS-PMG relationship to accurately reflect torques in dynamic simulations. Based on this, a dynamic model is established to analyze the Sperling index and the five-degree-of-freedom dynamic response of the HTS pinning maglev vehicle system under different HTS-PMG relationship models. The results indicate that the proposed discretized lateral-vertical coupling HTS-PMG relationship accurately characterizes the torque generated by the HTS levitator, influencing lateral, roll, pitch, and yaw motions to some extent. Compared with the concentrated force model, the discrete force model exhibits superior dynamic performance, particularly in terms of lateral dynamics and the lateral Sperling index. This study provides valuable insights into the field of HTS maglev, particularly regarding investigating HTS-PMG relationships and their impact on HTS maglev system dynamic performance.
- 4 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105220
Modeling and dynamic performance of distributed force in high-temperature superconducting pinning magnetic levitation
High-temperature superconducting (HTS) pinning magnetic levitation (maglev) systems are highly promising for future applications in rail transportation. Through the interaction between onboard HTS bulks and the permanent magnet guideway (PMG), this system generates levitation and guidance forces, known as the HTS-PMG relationship. Under practical conditions, this interaction manifests itself as a distributed force. However, past models have only considered concentrated forces. This study aims to design experiments to investigate the HTS-PMG relationship and propose a more realistic discretized lateral-vertical coupling HTS-PMG relationship to accurately reflect torques in dynamic simulations. Based on this, a dynamic model is established to analyze the Sperling index and the five-degree-of-freedom dynamic response of the HTS pinning maglev vehicle system under different HTS-PMG relationship models. The results indicate that the proposed discretized lateral-vertical coupling HTS-PMG relationship accurately characterizes the torque generated by the HTS levitator, influencing lateral, roll, pitch, and yaw motions to some extent. Compared with the concentrated force model, the discrete force model exhibits superior dynamic performance, particularly in terms of lateral dynamics and the lateral Sperling index. This study provides valuable insights into the field of HTS maglev, particularly regarding investigating HTS-PMG relationships and their impact on HTS maglev system dynamic performance.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (7) , 1-8
High-Temperature Superconducting Magnetic Levitation With the Halbach Array and V-Shaped Combined Permanent Magnet Guideway
The permanent magnet guideways (PMGs), serving as the sole magnetic field source for the high-temperature superconducting (HTS) pinning maglev system, exert a profound influence on the levitation performance of HTS bulks through its magnetic field distribution. To improve the levitation performance of HTS maglev systems, experiments to measure levitation and guidance forces were conducted using the 165-m test line PMG completed by Southwest Jiaotong University in 2021. Additionally, finite-element simulation models were developed. Subsequently, utilizing this simulation model as a foundation, a V-shaped Halbach array PMG was designed by combining a Halbach array with a “V” structure. Subsequently, the V-shaped PMG underwent simulation optimization with the goal of maximizing the levitation force. The optimized V-shaped PMG, when compared with the test line PMG with the same cross-sectional area, exhibits significant improvements. Under the zero-field cooling (FC) condition with a 15 mm lateral displacement, the levitation force experienced a 39.1% increase at the working height, while the guidance force showed a substantial 274.9% improvement. Similarly, under the FC condition with a 15-mm lateral displacement, there was a 43.6% increase in levitation force and a 186.1% increase in guidance force. These data unequivocally demonstrate the considerable application potential of the V-shaped PMG when compared with the test line PMG.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (7) , 1-8
High-Temperature Superconducting Magnetic Levitation With the Halbach Array and V-Shaped Combined Permanent Magnet Guideway
The permanent magnet guideways (PMGs), serving as the sole magnetic field source for the high-temperature superconducting (HTS) pinning maglev system, exert a profound influence on the levitation performance of HTS bulks through its magnetic field distribution. To improve the levitation performance of HTS maglev systems, experiments to measure levitation and guidance forces were conducted using the 165-m test line PMG completed by Southwest Jiaotong University in 2021. Additionally, finite-element simulation models were developed. Subsequently, utilizing this simulation model as a foundation, a V-shaped Halbach array PMG was designed by combining a Halbach array with a “V” structure. Subsequently, the V-shaped PMG underwent simulation optimization with the goal of maximizing the levitation force. The optimized V-shaped PMG, when compared with the test line PMG with the same cross-sectional area, exhibits significant improvements. Under the zero-field cooling (FC) condition with a 15 mm lateral displacement, the levitation force experienced a 39.1% increase at the working height, while the guidance force showed a substantial 274.9% improvement. Similarly, under the FC condition with a 15-mm lateral displacement, there was a 43.6% increase in levitation force and a 186.1% increase in guidance force. These data unequivocally demonstrate the considerable application potential of the V-shaped PMG when compared with the test line PMG.
- 22 November 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (1) , 015004
Electromagnetic force behavior of superconducting bulks passing electromagnetic turnout
High temperature superconducting (HTS) Maglev is a promising technology owing to its excellent electromagnetic properties of non-control stability and frictionless. As a critical component of HTS Maglev, the turnout poses challenges due to the use of the permanent magnet guideways (PMGs) that are difficult to switch mechanically. With simple structure and rapid responsiveness, electromagnetic turnout has become an interesting research field of HTS Maglev. The electromagnetic turnout is designed to control the electromagnetic force of the HTS bulks by adjusting the magnetic field using an electromagnetic-permanent magnetic structure. However, the magnetic field generated by the combination of the electromagnet and the PMs inevitably differs from the magnetic field above the PMGs, affecting the electromagnetic force behavior of the HTS bulks. To guarantee optimal performance of the electromagnetic turnout, the variation process of the magnetic field peak above the turnout is analyzed. Furthermore, a three-dimensional superconducting model based on the H -formulation and motion equation is built to obtain the electromagnetic force of the HTS bulks passing the turnout. It’s concluded that higher cooling heights in the preparation and higher working heights in the turnout area are recommended to reduce the magnetic resistance and avoid the destabilizing effect. In addition, the smaller bulks experience greater resistance, and the longer bulks are prone to nodding, while the wider bulks are prone to shaking above the turnout. Properly matching HTS bulks with operating conditions improves electromagnetic force behavior and benefits HTS Maglev turnout passability.
- 22 November 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (1) , 015004
Electromagnetic force behavior of superconducting bulks passing electromagnetic turnout
High temperature superconducting (HTS) Maglev is a promising technology owing to its excellent electromagnetic properties of non-control stability and frictionless. As a critical component of HTS Maglev, the turnout poses challenges due to the use of the permanent magnet guideways (PMGs) that are difficult to switch mechanically. With simple structure and rapid responsiveness, electromagnetic turnout has become an interesting research field of HTS Maglev. The electromagnetic turnout is designed to control the electromagnetic force of the HTS bulks by adjusting the magnetic field using an electromagnetic-permanent magnetic structure. However, the magnetic field generated by the combination of the electromagnet and the PMs inevitably differs from the magnetic field above the PMGs, affecting the electromagnetic force behavior of the HTS bulks. To guarantee optimal performance of the electromagnetic turnout, the variation process of the magnetic field peak above the turnout is analyzed. Furthermore, a three-dimensional superconducting model based on the H -formulation and motion equation is built to obtain the electromagnetic force of the HTS bulks passing the turnout. It’s concluded that higher cooling heights in the preparation and higher working heights in the turnout area are recommended to reduce the magnetic resistance and avoid the destabilizing effect. In addition, the smaller bulks experience greater resistance, and the longer bulks are prone to nodding, while the wider bulks are prone to shaking above the turnout. Properly matching HTS bulks with operating conditions improves electromagnetic force behavior and benefits HTS Maglev turnout passability.
- 11 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 4201-4216
Exploration of Split-Guideway Permanent Magnet Linear Eddy Current Brake With Improved Brake Force and Critical Speed Implemented in HTS Maglev System
The self-stabilization and absence of the drag force in high-temperature superconducting system (HTS) render its competitive edge over others, and the successful development of the first high-speed engineering prototype validates its potential. However, addressing the braking challenge has become a significant concern. In this work, a split-guideway permanent magnet eddy current brake (PMECB) with enhanced brake ability is proposed. Analytical models that consider the induced current in the truncation section and source magnetic field are developed and verified. A novel periodical simulation method is proposed to simulate an infinite guideway with finite solid model. Additionally, dependence of the number, size, and position of slit on the brake force is investigated, and the guidelines are presented, and a case design is performed. The superiority of split guideway is demonstrated in terms of brake distance and lateral oscillation frequency. Finally, through the high-speed test rig, the simulation and analytical models are verified, and the effectiveness of the split-guideway PMECB is confirmed. The evolutions of the electromagnetic forces throughout the continuous test are examined. The influences of transverse and vertical disturbances on PMECB are experimentally investigated.
- 11 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 4201-4216
Exploration of Split-Guideway Permanent Magnet Linear Eddy Current Brake With Improved Brake Force and Critical Speed Implemented in HTS Maglev System
The self-stabilization and absence of the drag force in high-temperature superconducting system (HTS) render its competitive edge over others, and the successful development of the first high-speed engineering prototype validates its potential. However, addressing the braking challenge has become a significant concern. In this work, a split-guideway permanent magnet eddy current brake (PMECB) with enhanced brake ability is proposed. Analytical models that consider the induced current in the truncation section and source magnetic field are developed and verified. A novel periodical simulation method is proposed to simulate an infinite guideway with finite solid model. Additionally, dependence of the number, size, and position of slit on the brake force is investigated, and the guidelines are presented, and a case design is performed. The superiority of split guideway is demonstrated in terms of brake distance and lateral oscillation frequency. Finally, through the high-speed test rig, the simulation and analytical models are verified, and the effectiveness of the split-guideway PMECB is confirmed. The evolutions of the electromagnetic forces throughout the continuous test are examined. The influences of transverse and vertical disturbances on PMECB are experimentally investigated.
- 23 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 32 (6) , 1-5
A High-Temperature Superconducting Maglev Turnout Based on a Permanent Magnet Device
Turnouts are an important part of the engineering application of high-temperature superconducting (HTS) maglev. Compared with railway turnout, the strong magnetic force between segments of the permanent magnet guideway (PMG) used in the HTS maglev system makes it inconvenient to switch. By replacing part of the permanent magnets (PMs) at the turnout area, the switching magnetic poles with excitation can change the magnetic field distribution above the PMGs and guide the levitating HTS bulks to complete switching. This paper presents a novel turnout design that consists of switching magnetic poles and the attached permanent magnet device (PMD). In particular, the PMD can reduce the turnout volume and avoid coil heating. Based on the system, the simulation data indicates that the switching magnetic poles could replace PMs to create a similar magnetic field distribution, meanwhile feasible for design and manufacture. This work provides references for future design in non-mechanical PMGs turnouts.
- 23 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 32 (6) , 1-5
A High-Temperature Superconducting Maglev Turnout Based on a Permanent Magnet Device
Turnouts are an important part of the engineering application of high-temperature superconducting (HTS) maglev. Compared with railway turnout, the strong magnetic force between segments of the permanent magnet guideway (PMG) used in the HTS maglev system makes it inconvenient to switch. By replacing part of the permanent magnets (PMs) at the turnout area, the switching magnetic poles with excitation can change the magnetic field distribution above the PMGs and guide the levitating HTS bulks to complete switching. This paper presents a novel turnout design that consists of switching magnetic poles and the attached permanent magnet device (PMD). In particular, the PMD can reduce the turnout volume and avoid coil heating. Based on the system, the simulation data indicates that the switching magnetic poles could replace PMs to create a similar magnetic field distribution, meanwhile feasible for design and manufacture. This work provides references for future design in non-mechanical PMGs turnouts.