Solid Particle Erosion Behaviors of Walnut Shell‐Filled Acrylic‐Styrene‐Acrylate ( ASA ) and Polycarbonate/Acrylic‐Styrene‐Acrylate ( PC / ASA ) Thermoplastic Blend Biocomposites
Open Access
- 21 May 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 46 (12) , 11594-11608
Abstract
The aim of this study is to investigate the solid particle erosion behavior of walnut shell (WS)‐filled acrylic‐styrene‐acrylate (ASA) and polycarbonate/acrylic‐styrene‐acrylate (PC/ASA) thermoplastic blend composites under various erosion conditions. Erosion resistance tests were conducted using Al 2 O 3 particles (600 μm, Mohs hardness 9) as erodent, at a velocity of 34 m/s, with impingement angles ranging from 30° to 90°. Test samples were subjected to these conditions for 24 s, and weight loss was measured to determine erosion rates. Key parameters such as density, hardness, and erosion coefficients were also evaluated. Composites with 10 wt% WS filler exhibited optimal performance, reducing erosion rates by up to 36.7% compared to unfilled PC/ASA blend. Macro and SEM imaging revealed the damage mechanisms, showing less material loss and better surface durability in WS‐filled composites. This study demonstrates that incorporating WS into ASA and PC/ASA matrices not only improves erosion resistance but also aligns with the goal of sustainable material development. The results suggest that these composites could be highly effective in industries where materials are exposed to wear and tear from abrasive forces, such as in construction or automotive applications.Keywords
All Related Versions
This publication has 23 references indexed in Scilit:
- Mechanical and thermal characterization of elastomer modified polypropylene hybrid composites reinforced with hazelnut shell and wollastonite fillersJournal of Applied Polymer Science, 2024
- Epoxy‐hemp and epoxy‐flax composites filled with glass dust for enhanced thermal insulation: An analytical and experimental studyPolymer Composites, 2024
- A comprehensive experimental study of enhanced solid particle erosive resistance on the inner/outer surface of graphene nanoplatelets modified basalt/epoxy composite pipePolymer Composites, 2023
- Physical, mechanical, and sliding wear behavior of epoxy composites filled with surface modified walnut shell particulatePolymer Composites, 2022
- Study of environmental behavior and its effect on solid particle erosion behavior of hierarchical porous activated carbon‐epoxy compositePolymer Composites, 2022
- Polymer additive manufacturing of ASA structure: Influence of printing parameters on mechanical propertiesMaterials Today: Proceedings, 2021
- Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene AcrylateMacromolecular Materials and Engineering, 2019
- Enhancement of impact resistance of biodegradable polymer using bamboo charcoal particlesMaterials Letters, 2014
- Fabrication of anatase titanium dioxide nanotubes by electroless deposition using polycarbonate for separate casting methodNano-Micro Letters, 2010
- Mechanical properties of polycarbonate/modified acrylonitrile‐styrene‐acrylate terpolymer blendJournal of Applied Polymer Science, 2009