Energy Balance of Briquette Production from Various Waste Biomass
Open Access
- 1 September 2018
- journal article
- Published by Ceska zemedelska univerzita v Praze in Scientia Agriculturae Bohemica
- Vol. 49 (3) , 236-243
Abstract
Production of briquette bio-fuel is related to several aspects of densification process. The present paper deals with the relation between briquette volume density ρ (kg·m −3 ) and required deformation energy E d (J). Wood, energy crop and cardboard feedstocks were compressed by a laboratory briquetting press of two diameters (40 and 65 mm); in this way six kinds of briquette samples (W 40 , W 65 , E 40 , E 65 , C 40 , C 65 ) were produced. The values of compressing force F (N) and briquette volume density ρ were measured directly during feedstock densification; the deformation energy E d was calculated subsequently. The amount of deformation energy E d consumed within the achievement of specific briquette volume density ρ levels differed in case of all samples, the same as the maximum achieved briquette volume density ρ levels. Best results, i.e. efficiency of briquette production (the highest ρ, the lowest E d ), were achieved by cardboard samples, followed by wood and finally by energy crop samples. An overall evaluation indicated a higher production efficiency of briquette samples 40 mm in diameter and the disadvantage of the production of briquette samples with briquette volume density ρ > 1000 kg·m −3 ; above such level, the amount of consumed deformation energy E d increased disproportionately sharply.Keywords
This publication has 12 references indexed in Scilit:
- Characterization of fuel briquettes made from a blend of rice husk and palm oil mill sludgeBiomass Conversion and Biorefinery, 2016
- Tangent Curve Function Description of Mechanical Behaviour of Bulk Oilseeds: A ReviewScientia Agriculturae Bohemica, 2015
- ENERGY BALANCE AND EFFICIENCY IN WOOD SAWDUST BRIQUETTES PRODUCTIONFLORESTA, 2014
- Study of briquette properties at their long-time storageJournal of Forest Science, 2013
- Effect of species, particle size and compacting pressure on relaxed density and compressive strength of fuel briquettesInternational Journal of Energy and Environmental Engineering, 2013
- Comparison of the Mechanical Behaviour of Selected Oilseeds under Compression LoadingNotulae Botanicae Horti Agrobotanici Cluj-Napoca, 2012
- Physiochemical Characterization of Briquettes Made from Different FeedstocksBiotechnology Research International, 2012
- Factors affecting strength and durability of densified biomass productsBiomass and Bioenergy, 2009
- Physical characterisation and chemical composition of densified biomass fuels with regard to their combustion behaviourBiomass and Bioenergy, 2004
- Physical Properties of Biomass BriquetsTransactions of the ASAE, 1989