Bidirectional multiport microinverter and grid-multimode-operation control for a non-linear load
- 1 May 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 1-6
Abstract
Micro-inverters usually are used to connect photovoltaic panels (PV) to the electricity grid. If the energy provided by the panel is not enough to satisfy the demands, the system becomes dependent exclusively of the grid. This constraint demands the use of a battery bank, therefore it is necessary to add a third port to the micro-inverter to connect this energy backup. In this paper, a two stage micro-inverter is proposed, the first stage is a DC/DC Triple Active Bridge (TAB) converter that integrates a back-up battery and works in soft switching; and the second stage is a Voltage Source Inverter (VSl) that operates in both grid-connected mode (GCM) and Stand Alone Mode (SAM). The grid-multimode operation controller developed detects the islanding fault and maintains the energy quality for a typical nonlinear load. Reliability and robustness of Uninterrupted Power Supplies (UPS) are increased by the proposed control.Keywords
This publication has 13 references indexed in Scilit:
- Harmonics Attenuation and Power Factor Correction of a More Electric Aircraft Power Grid Using Active Power FilterIEEE Transactions on Industrial Electronics, 2016
- Double fundamental frequency PLL with second order generalized integrator under unbalanced grid voltages2014
- Voltage control of a single distributed generation unite in autonomous mode operation under unbalance and non-linear load conditions2013
- Modes of Operation and System-Level Control of Single-Phase Bidirectional PWM Converter for Microgrid SystemsIEEE Transactions on Smart Grid, 2012
- Reconfigurable Control Scheme for a PV Microinverter Working in Both Grid-Connected and Island ModesIEEE Transactions on Industrial Electronics, 2011
- On Zero Steady-State Error Voltage Control of Single-Phase PWM Inverters With Different Load TypesIEEE Transactions on Power Electronics, 2011
- Single-stage isolated bi-directional converter topology using high frequency AC link for charging and V2G applications of PHEV2011
- Accurate and Less-Disturbing Active Antiislanding Method Based on PLL for Grid-Connected ConvertersIEEE Transactions on Power Electronics, 2010
- A new single-phase PLL structure based on second order generalized integrator2006
- A wireless controller for parallel inverters in distributed online UPS systems2004