Abstract
Sub-stoichiometric molybdenum oxide (MoO x ) has recently been investigated for application in high efficiency Si solar cells as a “hole selective” contact. In this paper, we investigate the electrical and light-emitting properties of MoO x -based contacts on Si from the viewpoint of realizing functional bipolar devices such as light-emitting diodes (LEDs) and transistors without any impurity doping of the Si surface. We realized diodes on n-type Si substrates using e-beam physical vapor deposition of Pd/MoO x contacts and compared their behavior to implanted p + n-Si diodes as a reference. In contrast to majority-carrier dominated conduction that occurs in conventional Schottky diodes, Pd/MoO x /n-Si diodes show minority-carrier dominated charge transport with I–V, C–V, and light-emitting characteristics comparable to implanted counterparts. Utilizing such MoO x -based contacts, we also demonstrate a lateral bipolar transistor concept without employing any doped junctions. A detailed C–V analysis confirmed the excessive band-bending in Si corresponding to a high potential barrier ( > 0.90 V) at the MoO x /n-Si interface which, along with the observed amorphous SiO x (Mo) interlayer, plays a role in suppressing the majority-carrier current. An inversion layer at the n-Si surface was also identified comprising a sheet carrier density greater than 8.6 × 10 11 cm − 2 , and the MoO x layer was found to be conductive though with a very high resistivity in the 10 4 Ω -cm range. We refer to these diodes as metal/non-insulator/semiconductor diodes and show with our device simulations that they can be mimicked as high-barrier Schottky diodes with an induced inversion layer at the interface.
Funding Information
  • Nederlandse Organisatie voor Wetenschappelijk Onderzoek (13145)

This publication has 35 references indexed in Scilit: