Trajectory Planning for Fast Dynamic One-Loop Flatness-Based Control of PMSMs
Open Access
- 19 February 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 29226-29238
Abstract
Permanent magnet (PM) motors are widely used in numerous industrial applications. Although the traditional proportional-integral (PI)-based field-oriented control (FOC) remains the most prevalent control method in industry, it has certain limitations. These include difficulties in handling system nonlinearities during constant changes in operating points, overlooking the saturation effects in permanent magnet synchronous motors (PMSMs), a trade-off between reference tracking and disturbance rejection, and limited dynamic performance due to its cascaded structure, particularly in fast-dynamic applications. Among the proposed nonlinear control methods for PMSMs, flatness-based (FB) control has demonstrated excellent performance in terms of reference tracking, disturbance rejection, and adaptability to saturation conditions. However, most FB control methods in the current literature utilize a cascaded structure to ensure system protection. To enhance one-loop FB control for applications requiring high dynamic performance and precise reference tracking, in this paper, a novel trajectory planning method is proposed to enable one-loop FB control for PMSM drives. This method considers system limits, such as current and switching voltage limits, during trajectory planning. The proposed method offers the advantage of relatively low computational requirements, allowing updates to be made in each switching period. The performance of the proposed method has been validated through both simulation studies and experimental tests on a dedicated testbench. The main novelty of this paper is the introduction of a new trajectory planning method for FB control of PMSMs. Unlike conventional cascaded structures, the proposed approach enables one-loop control while addressing the overcurrent limitation issues typically encountered in one-loop systems. This makes the method particularly suitable for applications that require high dynamic bandwidth, thanks to its simplified one-loop structure.Keywords
Funding Information
- King Mongkut’s University of Technology North Bangkok (KMUTNB-68-KNOW-20)
- Institut Carnot Icéel and Institut Carnot TSN
This publication has 21 references indexed in Scilit:
- Machine Learning-based Trajectory Planning for Single-loop Flatness-based Control of PMSMs2025
- A Novel Trajectory Planning for One-Loop Flatness-Based Control of PMSMIEEE Access, 2024
- Effect of Torque Load and Voltage Drop Observers on Robustness in Flatness-Based Control of PMSM Drives2024
- Comparison of Flatness-based Control and Field-Oriented Control for PMSMs in Automotive Water Pump Application2023
- Robust Flatness-based Control with State Observer-Based Parameter Estimation for PMSM Drive2018
- Field weakening in flatness-based torque control of saturated surface-mounted permanent magnet synchronous machines2015
- Control of a PMSM fed by a Quasi Z-source inverter based on flatness properties and saturation schemes2013
- Continuous-time non-linear flatness-based predictive control: an exact feedforward linearisation setting with an induction drive exampleInternational Journal of Control, 2008
- Flatness-based control of the induction drive minimising energy dissipation2007
- A Lie-Backlund approach to equivalence and flatness of nonlinear systemsIEEE Transactions on Automatic Control, 1999