Simulation of Stress Corrosion Cracking in In-Core Monitor Housing of Nuclear Power Plant
- 1 August 2015
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 137 (4) , 041401
Abstract
In the in-core monitor (ICM) housing of a reactor pressure vessel (RPV), residual stress has been widely reported to cause stress corrosion cracking (SCC) damage in the weld heat-affected zone. For this reason, it is important to evaluate the crack growth conservatively, and with high confidence to demonstrate fitness for service. This paper presents crack growth simulations in an ICM housing, which is welded at two different angles to the RPV. One weld angle is at the bottom of the RPV, and the welding area of the ICM housing is axisymmetric. The other angle is at the curved position of the RPV, and the weld area of the ICM housing is asymmetric. In these weld areas, crack growth behavior is estimated by superposed-finite element method (S-FEM), which allows generation of a global finite model and a detailed local mesh representing the crack independently. In the axisymmetric weld area, axial, slant and circumferential surface cracks are assumed at two locations where the residual stress fields are different from each other: one is isotropic and the other is circumferential. It is shown that crack growth behaviors are different under different residual stress fields. The results of S-FEM are compared with those of the influence function method (IFM), which assumes that an elliptical crack shape exists in a plate. It is shown that the IFM result is conservative compared to that of S-FEM. Next, an axial surface crack is assumed at the uphill, downhill, and midhill asymmetric weld areas. The midhill crack growth behavior is different from the uphill and downhill behaviors. Finally, two surface cracks are simulated in the asymmetric weld area and two initial crack arrangements are assumed. These results show the differences of the crack interaction and the crack growth process.Keywords
This publication has 10 references indexed in Scilit:
- Crack Growth Analysis in Weld-Heat Affected Zone Using S-Version FEMTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2009
- 1221 Three-dimensional crack propagation analysis using X-FEMThe proceedings of the JSME annual meeting, 2007
- Three dimensional virtual crack closure-integral method (VCCM) with skewed and non-symmetric mesh arrangement at the crack frontEngineering Fracture Mechanics, 2005
- Theoretical crack path predictionFatigue & Fracture of Engineering Materials & Structures, 2004
- Three-dimensional thermo-mechanical fatigue crack growth using BEMInternational Journal of Fatigue, 2000
- Analysis of Stress Intensity Factor due to Surface Crack Propagation by Using Influence Function Method and Inherent Strain Analysis in Residual Stress Fields Caused by Welding.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1999
- On adaptive multilevel superposition of finite element meshes for linear elastostaticsApplied Numerical Mathematics, 1994
- Study on Production Mechanism of Welding Residual Stress at the Juncture of a Pipe Penetrating a Thick Plate.QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 1994
- Analysis of stress intensity factors for surface cracks subject to arbitrarily distributed surface stresses.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1985
- On the Crack Extension in Plates Under Plane Loading and Transverse ShearJournal of Basic Engineering, 1963