Investigation of the sealing performance of the gearbox sealing system of high-speed trains
- 11 November 2022
- journal article
- research article
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 46 (1) , 63-73
Abstract
Based on the analysis methods of lubricant–air separation and oil scavenging, a discrete phase model (DPM) considering droplet–wall interactions is used to analyze lubricant–air separation effectiveness, the volume of fluid (VOF) is used to analyze oil-scavenging effectiveness, and the sealing mechanism of the gearbox sealing system of high-speed trains is comprehensively studied. This study shows that the sealing effectiveness is influenced by the lubricant–air separation effectiveness and the oil-scavenging effectiveness. The separation effectiveness depends on the air drag force and the inertia of the lubricant droplets. The oil-scavenging effectiveness is related to the distribution of the lubricant after separation. In addition, with increasing lubricant droplet size, the sealing effectiveness first decreases and then increases, and the sealing system has the highest sealing effectiveness for medium-diameter droplets. The lower the outlet pressure is, the lower the sealing efficiency of the sealing system.Keywords
Funding Information
- National Railway Group Science and Technology Program (N2020J026, N2021J028)
- Independent Research and Development Projects of State Key Laboratory of Heavy Duty AC Drive Electric Locomotive Systems Integration (R111720H01385)
- Independent Research and Development Projects of a Key Laboratory
This publication has 16 references indexed in Scilit:
- Analysis of particle trajectories in a quick-contact cyclone reactor using a discrete phase modelSeparation Science and Technology, 2017
- Geometry optimization of a deswirler for cyclone separator in terms of pressure drop using CFD and artificial neural networkSeparation and Purification Technology, 2017
- Effect of delta wing on the particle flow in a novel gas supersonic separatorPowder Technology, 2016
- Effect of fluid-structure interaction on sealed flow field and leakage rate based on computational fluid dynamicsJournal of Shanghai Jiaotong University (Science), 2015
- Evaluation of natural gas dehydration in supersonic swirling separators applying the Discrete Particle MethodAdvanced Powder Technology, 2012
- Comparative analysis of the influence of labyrinth seal configuration on leakage behaviorJournal of Mechanical Science and Technology, 2009
- Prediction of air/oil exit flows in a commercial aero-engine bearing chamberProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2006
- A Numerical Model for Oil Film Flow in an Aero-Engine Bearing Chamber and Comparison With Experimental Data2004
- Development of Methodology for Spray Impingement SimulationSAE International Journal of Advances and Current Practices in Mobility, 1995
- Erosion Prediction in Turbomachinery Resulting from Environmental Solid ParticlesJournal of Aircraft, 1975