Microstructural, mechanical, and corrosion properties of S355J2 structural steels joined by MIG welding
Open Access
- 31 December 2024
- journal article
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 12 (4) , 1035-1046
Abstract
In this study, the microstructural, mechanical, and corrosion properties of S355J2 structural steels welded by metal inert gas (MIG) welding method were investigated. Single surface and double surface welded structures were formed by MIG welding method using 2 different amperage values (200A, and 260A). The microhardness, tensile strength, corrosion and microstructure properties of the welded specimens were investigated. The structural and mechanical effects of different current values used on the material were analysed. Microstructure investigations show that fine grained structures start to coarsen and grain boundaries start to decrease due to welding heat input in the HAZ region. The highest hardness value was measured in the welded joint at 260A value in single surface welding due to rapid cooling and rapid solidification. Increases in yield strength and tensile strength were determined with increasing welding current and in the double-sided welding procedure. In the potentiodynamic corrosion test carried out in HCl solution, it was determined that the double-sided welded joint at 260A welding amperage and the double-sided welded joint at 260A was the most resistant to corrosion among the samples subjected to corrosion tests.Keywords
This publication has 12 references indexed in Scilit:
- A comparative study on the mechanical behavior of S355J2 steel repair-welded jointsJournal of Constructional Steel Research, 2023
- Equivalent material properties of the heat-affected zone in welded cold-formed rectangular hollow section connectionsThin-Walled Structures, 2022
- Planar-cellular-dendritic transformation in the fusion zone of a GH909 superalloy weldmentJournal of Materials Research and Technology, 2021
- The Corrosion Properties of S355J2 Steel Welded Joint in Chlorides EnvironmentPeriodica Polytechnica Transportation Engineering, 2018
- Insights into corrosion inhibition behavior of three chalcone derivatives for mild steel in hydrochloric acid solutionJournal of Molecular Liquids, 2017
- The effect of microstructure on hardness and toughness of low carbon welded steel using inert gas weldingMaterials & Design (1980-2015), 2011
- Effect of controlled atmosphere on the mig-mag arc weldment propertiesMaterials & Design (1980-2015), 2005
- Laser cladding Co-based alloy/SiCp composite coatings on IF steelMaterials & Design (1980-2015), 2004
- Welding: Solidification and microstructureJOM, 2003
- Effect of coarse initial grain size on microstructure and mechanical properties of weld metal and HAZ of a low carbon steelMaterials Science and Engineering: A, 1999