Preparation of polypropylene/nanoclay composite fibers
- 16 January 2013
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 53 (10) , 2035-2044
Abstract
Melt spinning of nanoclay (NA)/polypropylene (PP) composites into textile fibers is studied. The synthetic NA Perkalite F100 is prone to be exfoliated in PP matrix. With the help of a maleic anhydride‐grafted low‐molecular‐weight PP as compatibilizer (Epolene E43), a highly exfoliated PP/NA composite was successfully prepared. However, the prepared PP/NA composite shows a poor spinnability because of the phase separation between Epolene E43 and PP matrix. The combination of two different groups of compatibilizers, which are Polybond 1001 (acrylic acid‐grafted PP) for the dispersion of NA and Epolene G3216 (maleic anhydride‐grafted PP‐based copolymer) for the exfoliation of NA, can solve this problem. The PP/NA composite prepared by these two compatibilizers can be smoothly spun into fiber at the NA concentration below 1.9 wt%, which is found to be the percolation concentration of formation of NA network structure in PP matrix. POLYM. ENG. SCI., 53:2035–2044, 2013. © 2013 Society of Plastics EngineersKeywords
Funding Information
- European Community's Seventh Framework (203831, FP7/2007-2013, 228439)
This publication has 31 references indexed in Scilit:
- Morphology and tensile properties of polypropylene‐multiwalled carbon nanotubes composite fibersJournal of Applied Polymer Science, 2010
- Some factors influencing exfoliation and physical property enhancement in nanoclay epoxy resins based on diglycidyl ethers of bisphenol A and FJournal of Applied Polymer Science, 2007
- Effect of the molecular weight of maleated polypropylenes on the melt compounding of polypropylene/organoclay nanocompositesJournal of Applied Polymer Science, 2005
- A rheological method to compare the degree of exfoliation of nanocompositesPolymer, 2003
- PP–PP‐g‐MAH–Org‐MMT nanocomposites. I. Intercalation behavior and microstructureJournal of Applied Polymer Science, 2003
- Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocompositesPolymer, 2001
- Thermal properties and flame retardance of Al(OH)3/polypropylene composites modified by polypropylene grafting with acrylic acidJournal of Applied Polymer Science, 2001
- Mechanical properties and fracture morphology of Al(OH)3/polypropylene composites modified by PP grafting with acrylic acidJournal of Applied Polymer Science, 2001
- Poly(propylene)/organoclay nanocomposite formation: Influence of compatibilizer functionality and organoclay modificationMacromolecular Materials and Engineering, 2000
- Elongational flow and melt-spinning instability of concentrated suspensions of small particles in polymer meltsJournal of Applied Polymer Science, 1981