Zengwei Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zengwei Guo has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Baozhong Zhang
Centre for Analysis and Synthesis, Department of Chemistry, Lund University, P.O. Box 124, SE-22100 Lund, Sweden
5 shared publications Erik Nilsson
Plasman, Gothenburg SE-41263, Sweden
3 shared publications- Bengt Hagström
Swerea IVF PO Box 104 Mölndal SE‐431 22 Sweden
2 shared publications Mattias Andersson
RISE Research Institutes of Sweden
2 shared publications- Niklas Warlin
Centre for Analysis and Synthesis, Department of Chemistry, Lund University, P.O. Box 124, SE-22100 Lund, Sweden
2 shared publications - Nitin G. Valsange
Department of Chemistry Centre for Analysis and Synthesis Lund University P.O. Box 124 SE‐22100 Lund Sweden
2 shared publications
Latest Publications
- Open Access
- 19 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (43) , 19695-19704
Biobased Furan Polymers as Next-Generation Synthetic Fibers for Circular Textiles
The textile industry is a major contributor to many global environmental challenges, such as greenhouse gas emissions and low recycling rates. In particular, the widespread use of fossil-based, non-recyclable polyester-cotton blends in textiles presents substantial challenges to advancing sustainability and establishing a circular economy. Bio-based polyesters are considered as potential alternatives for producing textiles with lower environmental impacts, but they frequently exhibit critical limitations as fiber materials in textile applications. Here, we present a practical approach for evaluating the spinnability of emerging bio-based polymers and report the development of poly(butylene furanoate) (PBF) as a renewable and chemically recyclable alternative to conventional polyesters. PBF exhibits high molecular weight via scalable melt polycondensation and excellent melt-spinnability into fine, high-tenacity fibers. The resulting fibers are readily dyeable under mild conditions and, they can be chemically recycled from polycotton blends via mild methanolysis depolymerization, yielding the original monomers in high yield and purity while preserving the integrity of the cotton fibers. The corresponding recovered monomers can be conveniently repolymerized into high-quality PBF, demonstrating a fully circular material platform. These findings revealed that PBF could be a promising biobased material for next-generation sustainable textiles, combining desirable performance, processability, renewability, and product circularity.
- 19 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (43) , 19695-19704
Open AccessBiobased Furan Polymers as Next-Generation Synthetic Fibers for Circular Textiles
The textile industry is a major contributor to many global environmental challenges, such as greenhouse gas emissions and low recycling rates. In particular, the widespread use of fossil-based, non-recyclable polyester-cotton blends in textiles presents substantial challenges to advancing sustainability and establishing a circular economy. Bio-based polyesters are considered as potential alternatives for producing textiles with lower environmental impacts, but they frequently exhibit critical limitations as fiber materials in textile applications. Here, we present a practical approach for evaluating the spinnability of emerging bio-based polymers and report the development of poly(butylene furanoate) (PBF) as a renewable and chemically recyclable alternative to conventional polyesters. PBF exhibits high molecular weight via scalable melt polycondensation and excellent melt-spinnability into fine, high-tenacity fibers. The resulting fibers are readily dyeable under mild conditions and, they can be chemically recycled from polycotton blends via mild methanolysis depolymerization, yielding the original monomers in high yield and purity while preserving the integrity of the cotton fibers. The corresponding recovered monomers can be conveniently repolymerized into high-quality PBF, demonstrating a fully circular material platform. These findings revealed that PBF could be a promising biobased material for next-generation sustainable textiles, combining desirable performance, processability, renewability, and product circularity.
- Open Access
- 10 August 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (41)
Partially Biobased Polyurethanes With Reversibly Crosslinkable Furan Units Toward Recyclable Thermosetting Textile Fibres
Molecular design combining biobased feedstocks, fiber processability, and reversible crosslinking is important for sustainable textiles. Herein, we report a new molecular design and synthetic strategy for partially biobased polyurethanes with tuneable chemical composition and properties, which show potential for the development of reversibly crosslinked textile fibers with enhanced recyclability. A lignin‐derived new aromatic monomer was synthesized as the rigid building block, which could be copolymerized with flexible tetraethylene glycol and diisocyanates to achieve the balanced structural rigidity needed for fiber design. Moreover, a sugar‐based 2,5‐bis(hydroxymethyl)furan was also incorporated in the copolymerization, which offers enhanced structural rigidity and enables thermally induced crosslinking/decrosslinking based on Diels‐Alder chemistry. The resulting polyurethanes exhibited moderate to high molecular weights (10–280 kDa) and tuneable glass transition temperatures (31–124°C). Reversible crosslinking/decrosslinking of the obtained polymers could be conveniently carried out and repeated at least five cycles without significant property deterioration. Selected polymers were processed into noncrosslinked and crosslinked fibers by wet spinning at different draw ratios. The spinnability, thermal properties, and fiber mechanical responses were affected by molecular composition and processing conditions. These results demonstrate that the molecular design strategy successfully introduces thermally reversible crosslinks into partially biobased polyurethanes with potential for fiber applications.
- 10 August 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (41)
Open AccessPartially Biobased Polyurethanes With Reversibly Crosslinkable Furan Units Toward Recyclable Thermosetting Textile Fibres
Molecular design combining biobased feedstocks, fiber processability, and reversible crosslinking is important for sustainable textiles. Herein, we report a new molecular design and synthetic strategy for partially biobased polyurethanes with tuneable chemical composition and properties, which show potential for the development of reversibly crosslinked textile fibers with enhanced recyclability. A lignin‐derived new aromatic monomer was synthesized as the rigid building block, which could be copolymerized with flexible tetraethylene glycol and diisocyanates to achieve the balanced structural rigidity needed for fiber design. Moreover, a sugar‐based 2,5‐bis(hydroxymethyl)furan was also incorporated in the copolymerization, which offers enhanced structural rigidity and enables thermally induced crosslinking/decrosslinking based on Diels‐Alder chemistry. The resulting polyurethanes exhibited moderate to high molecular weights (10–280 kDa) and tuneable glass transition temperatures (31–124°C). Reversible crosslinking/decrosslinking of the obtained polymers could be conveniently carried out and repeated at least five cycles without significant property deterioration. Selected polymers were processed into noncrosslinked and crosslinked fibers by wet spinning at different draw ratios. The spinnability, thermal properties, and fiber mechanical responses were affected by molecular composition and processing conditions. These results demonstrate that the molecular design strategy successfully introduces thermally reversible crosslinks into partially biobased polyurethanes with potential for fiber applications.
- Open Access
- 11 November 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (4) , e202402067
Reversibly Crosslinked Polyurethane Fibres from Sugar‐Based 5‐Chloromethylfurfural: Synthesis, Fibre‐Spinning and Fibre‐to‐Fibre Recycling
The development of recyclable crosslinked thermosetting fibres is a challenging research topic. In the present work, we have designed and synthesized polyurethane fibres from fructose‐derived 5‐chloromethylfurfural (CMF) and lignin‐derived monomeric phenols. The greenhouse gas emissions associated with the production of CMF showed comparable results to that of 5‐hydroxymethylfurfural (HMF), a high potential sugar‐based platform molecule. The wet‐spun biobased polyurethane fibres produced could be conveniently crosslinked using Diels–Alder chemistry to effectively enhance the glass transition temperature and mechanical properties. At a mildly elevated temperature (140 °C), the chemically crosslinked fibres could be effectively de‐crosslinked, which enabled complete separation from a mixture with poly(ethylene terephthalate) (PET) and cotton fibres. These results outline a potential strategy to design and fabricate new biobased fibres with reversible crosslinking, which may enable fibre‐to‐fibre recycling.
- 11 November 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (4) , e202402067
Open AccessReversibly Crosslinked Polyurethane Fibres from Sugar‐Based 5‐Chloromethylfurfural: Synthesis, Fibre‐Spinning and Fibre‐to‐Fibre Recycling
The development of recyclable crosslinked thermosetting fibres is a challenging research topic. In the present work, we have designed and synthesized polyurethane fibres from fructose‐derived 5‐chloromethylfurfural (CMF) and lignin‐derived monomeric phenols. The greenhouse gas emissions associated with the production of CMF showed comparable results to that of 5‐hydroxymethylfurfural (HMF), a high potential sugar‐based platform molecule. The wet‐spun biobased polyurethane fibres produced could be conveniently crosslinked using Diels–Alder chemistry to effectively enhance the glass transition temperature and mechanical properties. At a mildly elevated temperature (140 °C), the chemically crosslinked fibres could be effectively de‐crosslinked, which enabled complete separation from a mixture with poly(ethylene terephthalate) (PET) and cotton fibres. These results outline a potential strategy to design and fabricate new biobased fibres with reversible crosslinking, which may enable fibre‐to‐fibre recycling.
- Open Access
- 28 November 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (49) , 16778-16785
Development of Circularly Recyclable Low Melting Temperature Bicomponent Fibers toward a Sustainable Nonwoven Application
- 28 November 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (49) , 16778-16785
Open AccessDevelopment of Circularly Recyclable Low Melting Temperature Bicomponent Fibers toward a Sustainable Nonwoven Application
- Open Access
- 10 August 2021
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 12 (34) , 4942-4953
Synthesis and melt-spinning of partly bio-based thermoplastic poly(cycloacetal-urethane)s toward sustainable textiles
A rigid diol with a cyclic acetal structure was synthesized by facile acetalation of fructose-based 5-hydroxymethyl furfural (HMF) and partly bio-based di-trimethylolpropane (di-TMP). This diol (Monomer T) was copolymerized with potentially bio-based flexible polytetrahydrofuran and diisocyanates to prepare thermoplastic poly(cycloacetal-urethane)s. A modified one-step solution polymerization protocol resulted in relatively high molecular weights (Mn ∼ 41.5–98.9 kDa). All the obtained poly(cycloacetal-urethane)s were amorphous with tuneable glass transition temperatures up to 104 °C. Thermogravimetric analysis indicated that these polymers were thermally stable up to 253 °C and had a relatively high pyrolysis char residue, which may indicate potential inherent flame resistance. Melt rheology measurements were performed to determine a suitable processing window between 165–186 °C, after which the polymer was successfully melt-spun into ∼150 meters of homogeneous fibres at 185 °C. The resulting fibres could be readily hydrolysed under acidic conditions, resulting in partial recovery of the original chemical building blocks.
- 10 August 2021
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 12 (34) , 4942-4953
Open AccessSynthesis and melt-spinning of partly bio-based thermoplastic poly(cycloacetal-urethane)s toward sustainable textiles
A rigid diol with a cyclic acetal structure was synthesized by facile acetalation of fructose-based 5-hydroxymethyl furfural (HMF) and partly bio-based di-trimethylolpropane (di-TMP). This diol (Monomer T) was copolymerized with potentially bio-based flexible polytetrahydrofuran and diisocyanates to prepare thermoplastic poly(cycloacetal-urethane)s. A modified one-step solution polymerization protocol resulted in relatively high molecular weights (Mn ∼ 41.5–98.9 kDa). All the obtained poly(cycloacetal-urethane)s were amorphous with tuneable glass transition temperatures up to 104 °C. Thermogravimetric analysis indicated that these polymers were thermally stable up to 253 °C and had a relatively high pyrolysis char residue, which may indicate potential inherent flame resistance. Melt rheology measurements were performed to determine a suitable processing window between 165–186 °C, after which the polymer was successfully melt-spun into ∼150 meters of homogeneous fibres at 185 °C. The resulting fibres could be readily hydrolysed under acidic conditions, resulting in partial recovery of the original chemical building blocks.
- 7 February 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 135 (21)
An efficient recycling process of glycolysis of PET in the presence of a sustainable nanocatalyst
We demonstrate that the catalyst Perkalite F100 efficiently works as a nanocatalyst in the depolymerization of poly(ethylene terephthalate) (PET). After depolymerization of PET in the presence of ethylene glycol and the Perkalite nanocatalyst, the main product obtained was bis(2‐hydroxylethyl) terephthalate (BHET) with high purity, as confirmed by Fourier transform infrared spectroscopy and NMR. The BHET monomers could serve directly as starting materials in a further polymerization into PET with a virgin quality and contribute to a solution for the disposal of PET polymers. Compared with the direct glycolysis of PET, the addition of a predegradation step was shown to reduce the reaction time needed to reach the depolymerization equilibrium. The addition of the predegradation step also allowed lower reaction temperatures. Therefore, the strategy to include a predegradation step before depolymerization is suitable for increasing the efficiency of the glycolysis reaction of PET into BHET monomers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46285.
- 7 February 2018
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 135 (21)
An efficient recycling process of glycolysis of PET in the presence of a sustainable nanocatalyst
We demonstrate that the catalyst Perkalite F100 efficiently works as a nanocatalyst in the depolymerization of poly(ethylene terephthalate) (PET). After depolymerization of PET in the presence of ethylene glycol and the Perkalite nanocatalyst, the main product obtained was bis(2‐hydroxylethyl) terephthalate (BHET) with high purity, as confirmed by Fourier transform infrared spectroscopy and NMR. The BHET monomers could serve directly as starting materials in a further polymerization into PET with a virgin quality and contribute to a solution for the disposal of PET polymers. Compared with the direct glycolysis of PET, the addition of a predegradation step was shown to reduce the reaction time needed to reach the depolymerization equilibrium. The addition of the predegradation step also allowed lower reaction temperatures. Therefore, the strategy to include a predegradation step before depolymerization is suitable for increasing the efficiency of the glycolysis reaction of PET into BHET monomers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46285.
- 29 May 2013
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 130 (4) , 2603-2609
Melt spinning of PVDF fibers with enhanced β phase structure
Polyvinylidene fluoride (PVDF) fibers with a high amount of β phase crystal structure were prepared by melt spinning. With this technique, the cold drawing process is critical and efficient when aiming for a high amount of β phase. During the cold drawing process, more than 80% of the originally formed α phase crystal structure was converted into the β phase structure. In addition, the incorporation of 0.01 wt % of amino‐modified double wall carbon nanotube (NH2‐DWCNT) could further enhance the β phase content in the PVDF fibers. FTIR and DSC studies showed that the addition of NH2‐DWCNT to PVDF fibers could increase both the total crystallinity and β phase fraction in PVDF. The addition of nanoclay was found to be less efficient in this respect. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2603–2609, 2013
- 29 May 2013
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 130 (4) , 2603-2609
Melt spinning of PVDF fibers with enhanced β phase structure
Polyvinylidene fluoride (PVDF) fibers with a high amount of β phase crystal structure were prepared by melt spinning. With this technique, the cold drawing process is critical and efficient when aiming for a high amount of β phase. During the cold drawing process, more than 80% of the originally formed α phase crystal structure was converted into the β phase structure. In addition, the incorporation of 0.01 wt % of amino‐modified double wall carbon nanotube (NH2‐DWCNT) could further enhance the β phase content in the PVDF fibers. FTIR and DSC studies showed that the addition of NH2‐DWCNT to PVDF fibers could increase both the total crystallinity and β phase fraction in PVDF. The addition of nanoclay was found to be less efficient in this respect. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2603–2609, 2013
- 16 January 2013
- Published by Wiley in Polymer Engineering & Science
- Vol. 53 (10) , 2035-2044
Preparation of polypropylene/nanoclay composite fibers
Melt spinning of nanoclay (NA)/polypropylene (PP) composites into textile fibers is studied. The synthetic NA Perkalite F100 is prone to be exfoliated in PP matrix. With the help of a maleic anhydride‐grafted low‐molecular‐weight PP as compatibilizer (Epolene E43), a highly exfoliated PP/NA composite was successfully prepared. However, the prepared PP/NA composite shows a poor spinnability because of the phase separation between Epolene E43 and PP matrix. The combination of two different groups of compatibilizers, which are Polybond 1001 (acrylic acid‐grafted PP) for the dispersion of NA and Epolene G3216 (maleic anhydride‐grafted PP‐based copolymer) for the exfoliation of NA, can solve this problem. The PP/NA composite prepared by these two compatibilizers can be smoothly spun into fiber at the NA concentration below 1.9 wt%, which is found to be the percolation concentration of formation of NA network structure in PP matrix. POLYM. ENG. SCI., 53:2035–2044, 2013. © 2013 Society of Plastics Engineers
- 16 January 2013
- Published by Wiley in Polymer Engineering & Science
- Vol. 53 (10) , 2035-2044
Preparation of polypropylene/nanoclay composite fibers
Melt spinning of nanoclay (NA)/polypropylene (PP) composites into textile fibers is studied. The synthetic NA Perkalite F100 is prone to be exfoliated in PP matrix. With the help of a maleic anhydride‐grafted low‐molecular‐weight PP as compatibilizer (Epolene E43), a highly exfoliated PP/NA composite was successfully prepared. However, the prepared PP/NA composite shows a poor spinnability because of the phase separation between Epolene E43 and PP matrix. The combination of two different groups of compatibilizers, which are Polybond 1001 (acrylic acid‐grafted PP) for the dispersion of NA and Epolene G3216 (maleic anhydride‐grafted PP‐based copolymer) for the exfoliation of NA, can solve this problem. The PP/NA composite prepared by these two compatibilizers can be smoothly spun into fiber at the NA concentration below 1.9 wt%, which is found to be the percolation concentration of formation of NA network structure in PP matrix. POLYM. ENG. SCI., 53:2035–2044, 2013. © 2013 Society of Plastics Engineers