Design of Passive Transmission Line by Adjusting Intrinsic Parameters of Josephson Junctions
- 22 May 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (6) , 1-5
Abstract
Along with the improvement of integration and the requirement of high-speed operation, the passive transmission line (PTL) plays a significant role in superconducting integrated circuits due to its intrinsic advantage of extremely low propagation delay and low signal loss in long-distance transmission. Good impedance matching is critical to reduce the signal reflection in the transmission line and maximize the power transferred. Based on the PTL wiring layer selection under SIMIT-Nb03 process, we studied the equivalent input/output impedance for Josephson junction (JJ) at the IO port and explored a method of impedance matching in rapid-single-flux-quantum (RSFQ) circuits by adjusting the Stewart McCumber parameter $\beta_c$ of the JJ in the design of the PTL's driver and receiver. Furthermore, the accompanying influence from the JJ's modified $\beta_c$ on the performance of the driver and receiver is evaluated to maximize the profit of the functional circuits. The common-used serial resistor is removed to obtain a balanced bias margin for the PTL circuits. The proposed PTL has been designed and tested based on SIMIT-Nb03 fabrication process. ±30% bias margin for the PTL is achieved at low frequency and high frequency (40 GHz) contrast tests, including operation speed and transmission length as test vector. Additionally, a frequency sweep for 1 mm PTL is performed by the designed ring oscillator on the chip. The maximum working frequency is up to 129 GHz, with a margin duration of 8%.Keywords
Funding Information
- Strategic Priority Research Program of the Chinese Academy of Sciences (XDA18000000)
- National Natural Science Foundation of China (92164101, 62171437)
- National Key R&D Program of China (2021YFB0300400)
- Science and Technology Commission of Shanghai Municipality (21DZ1101000)
This publication has 9 references indexed in Scilit:
- JSICsim—An Analog Simulator for Superconductor Integrated CircuitIEEE Transactions on Circuits and Systems II: Express Briefs, 2022
- Optimization of Passive Transmission Lines for Single Flux Quantum CircuitsIEEE Transactions on Applied Superconductivity, 2021
- Investigation of Passive Transmission Lines for the MIT-LL SFQ5ee ProcessIEEE Transactions on Applied Superconductivity, 2019
- Design of the Passive Transmission Lines for Different Stripline Widths and ImpedancesIEEE Transactions on Applied Superconductivity, 2016
- Demonstration of chip-to-chip transmission of single-flux-quantum pulses at throughputs beyond 100 GbpsApplied Physics Letters, 2005
- Transmission of single-flux-quantum pulse between superconductor chipsApplied Physics Letters, 2005
- Characteristics of driver and receiver circuits with a passive transmission line in RSFQ circuitsIEEE Transactions on Applied Superconductivity, 2000
- Octopux: an advanced automated setup for testing superconductor circuitsIEEE Transactions on Applied Superconductivity, 1997
- Transmission of single-flux-quantum pulses along superconducting microstrip linesIEEE Transactions on Applied Superconductivity, 1993