Synthesis and characterization of green urethane non‐isocyanate from oleic acid for wood composite application
Authors:
- Muhammad GhozaliMGMuhammad Ghozali
- Evi TriwulandariETEvi Triwulandari
- Witta Kartika RestuWRWitta Kartika Restu
- Yenny MelianaYMYenny Meliana
- Agus HaryonoAHAgus Haryono
- Melati SeptiyantiMSMelati Septiyanti
- Nissa Nurfajrin SolihatNSNissa Nurfajrin Solihat
- Seng Hua LeeSeng Hua Lee
- Widya FatriasariWidya Fatriasari
- Petar AntovPetar Antov
- 19 October 2023
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (3)
Abstract
Conventional polyurethane (PU) is usually synthesized by a reaction between isocyanate and polyol. The use of isocyanate compounds is associated with significant health and environmental problems. Therefore, it is necessary to develop an environmentally friendly alternative method for manufacturing PUs without isocyanate routes. The aim of this research work was to synthesize green urethane from oleic acid, which included the following three stages: the synthesis of epoxidized oleic acid (EOA), the synthesis of carbonated oleic acid (COA), and the synthesis of green urethane from oleic acid (UOA). The resulting product was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Nuclear Magnetic Resonance (NMR) analyses, and by determining the iodine number, oxirane number, and hydroxyl value. The results of FTIR and NMR showed that EOA was successfully synthesized. The optimum COA synthesis process was obtained on TBAB catalyst usage of 1% (wt/wt) at 140°C for 48 h with a 500‐rpm stirring rate and CO2 gas flow rate of 0.2 mL/min with the resulting COA oxirane value of 0.00. The optimum condition of UOA synthesis through the aminolysis process resulted in the use of LiCl of 19.8% (wt/wt) at 70°C for 3 h with a stirring speed of 1200 rpm with a UOA hydroxyl number generated of 237.93 mg/mL.Keywords
This publication has 27 references indexed in Scilit:
- Branched polyols based on oleic acid for production of polyurethane foams reinforced with bamboo fiberIranian Polymer Journal, 2016
- Bio-based waterborne polyurethane/carbon dot nanocomposite as a surface coating materialProgress in Organic Coatings, 2016
- Progress in non-isocyanate polyurethanes synthesized from cyclic carbonate intermediates and di- or polyamines in the context of structure–properties relationship and from an environmental point of viewPolymer Bulletin, 2015
- Green polyurethane from lignin and soybean oil through non-isocyanate reactionsEuropean Polymer Journal, 2015
- Vegetable oil based eco-friendly coating materials: A review articleArabian Journal of Chemistry, 2014
- Development of vegetable‐oil‐based polymersJournal of Applied Polymer Science, 2014
- Producing Jatropha oil-based polyol via epoxidation and ring openingIndustrial Crops and Products, 2013
- Preparation and characterization of high-solid polyurethane coating systems based on vegetable oil derived polyolsProgress in Organic Coatings, 2013
- Oleic Acid-based Polyurethane and its Biocomposites with Oil Palm Trunk Fiber DustJournal of Thermoplastic Composite Materials, 2009
- Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acidProgress in Organic Coatings, 2009