Melati Septiyanti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Melati Septiyanti has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Evi Triwulandari
Research Center for Chemistry, Indonesian Institute of Sciences (LIPI), South Tangerang, Indonesia
4 shared publications - Muhammad Ghozali
Research Center for Chemistry, Indonesian Institute of Sciences (LIPI), South Tangerang, Indonesia
4 shared publications - Witta Kartika Restu
Research Center for Chemistry, National Research and Innovation Agency (BRIN), Serpong, Indonesia
3 shared publications - Yulianti Sampora
Research Centre for Molecular Chemistry National Research and Innovation Agency KST B.J. Habibie. Jalan Raya Puspiptek South Tangerang Banten 15314 Indonesia
3 shared publications - Agus Haryono
Research Center for Chemistry National Research and Innovation Agency (BRIN) Tangerang Selatan Indonesia
2 shared publications - Widya Fatriasari
Research Center for Biomass and Bioproducts, Research Organization for Nanotechnology and Material, National Research and Innovation Agency (BRIN), Serpong 15314, Indonesia
2 shared publications
Latest Publications
- Open Access
- 8 July 2025
- Published by Veterinary World in Veterinary World
- Vol. 18 (7) , 1807-1818
Nanotechnology-driven strategies for tilapia vaccines: Comparative evaluation of nanoemulsions and silica nanoparticles against Streptococcus agalactiae
Streptococcosis, caused by Streptococcus agalactiae, is a significant disease in tilapia farming that results in substantial economic losses. While vaccination is the most effective method for prevention, current vaccines face challenges when administered orally or through immersion, primarily due to poor absorption and degradation in the fish’s digestive system. Nanotechnology offers new ways to improve vaccine delivery and effectiveness. This review compares two nanoparticle (NPs)-based systems – nanoemulsions and silica NPs (SiNP) – for delivering vaccines to tilapia. Nanoemulsions are small, stable droplets that protect the vaccine and help it stick to mucosal surfaces, making them more effective in triggering immune responses. SiNP are highly stable and can protect vaccines under harsh conditions but still face challenges in particle size and vaccine loading. The review highlights important factors, including particle size, stability, and surfactant composition, that affect the vaccine’s effectiveness. In practical terms, nanoemulsions are more suitable for use in Indonesia’s tropical aquaculture settings because they are easier to apply, more stable, and more effective in their current formulations. Further research is needed to improve both systems, especially to ensure long-term safety, improve delivery to mucosal tissues, and reduce production costs. Nanotechnology-based vaccines have a strong potential to improve fish health and reduce antibiotic use in aquaculture. Keywords: fish health, mucosal vaccine, nanoemulsion, nanovaccine, silica nanoparticles, Streptococcus agalactiae, tilapia.
- 8 July 2025
- Published by Veterinary World in Veterinary World
- Vol. 18 (7) , 1807-1818
Open AccessNanotechnology-driven strategies for tilapia vaccines: Comparative evaluation of nanoemulsions and silica nanoparticles against Streptococcus agalactiae
Streptococcosis, caused by Streptococcus agalactiae, is a significant disease in tilapia farming that results in substantial economic losses. While vaccination is the most effective method for prevention, current vaccines face challenges when administered orally or through immersion, primarily due to poor absorption and degradation in the fish’s digestive system. Nanotechnology offers new ways to improve vaccine delivery and effectiveness. This review compares two nanoparticle (NPs)-based systems – nanoemulsions and silica NPs (SiNP) – for delivering vaccines to tilapia. Nanoemulsions are small, stable droplets that protect the vaccine and help it stick to mucosal surfaces, making them more effective in triggering immune responses. SiNP are highly stable and can protect vaccines under harsh conditions but still face challenges in particle size and vaccine loading. The review highlights important factors, including particle size, stability, and surfactant composition, that affect the vaccine’s effectiveness. In practical terms, nanoemulsions are more suitable for use in Indonesia’s tropical aquaculture settings because they are easier to apply, more stable, and more effective in their current formulations. Further research is needed to improve both systems, especially to ensure long-term safety, improve delivery to mucosal tissues, and reduce production costs. Nanotechnology-based vaccines have a strong potential to improve fish health and reduce antibiotic use in aquaculture. Keywords: fish health, mucosal vaccine, nanoemulsion, nanovaccine, silica nanoparticles, Streptococcus agalactiae, tilapia.
- Open Access
- 2 July 2024
- Published by Beilstein Institut in Beilstein Archives
Nanocream with Active Ingredients of Cardamom Seeds Oil as an Antibacterial Topical Preparation
Cardamom is one of the Indonesian herbs that produce essential oil which is known to have various pharmacological properties such as antioxidant, antifungal, antiviral, and antibacterial. Cardamom essential oil (CEO) in this study was obtained by ultrasonic-assisted extraction-hydrodistillation (UAE-HD). For practical topical application, nano cream formulation was developed. This study aimed to observe the CEO antibacterial activity in nano cream preparation with the variation of Hydrophile-Lipophile Balance (HLB) with values 10, 11, 12 and oil concentrations 2.5%, 5%, 7%, 10%, and 15%. CEO nano cream presented inhibition zone 6.03-15.23 mm against Escherichia coli and 11.13-15.23 mm against Staphylococcus aureus. The antibacterial activity in CEO was due to the main constituent that was 1,8-cineol. The particle size and zeta potential produced by the nano cream formulation ranged from 114,3 – 341,53 nm and 73,43 – 94,70 mV, respectively. The physical properties of CEO nanocream were as follows, pH 4.30-6.45; spreadability 5.1-6.9 cm; and viscosity 5210-6910 cP and showed excellent stability for 4 weeks. The best formulation was the formulation with the highest antibacterial activity in order to provide good efficacy. The formulation with CEO concentration 15%; HLB 12 possessed inhibition zone 10.2 mm and 11.4 mm for E. coli and S. aureus, respectively. The average particle size was 270.40 ± 0.38 nm and zeta potential -88.70 ± 0.20 mV, wherein still meets the nanoemulsion size range that enable penetrated into stratum corneum. This concluded that cardamom essential nano cream can be considered a potential antibacterial topical preparation.
- 2 July 2024
- Published by Beilstein Institut in Beilstein Archives
Open AccessNanocream with Active Ingredients of Cardamom Seeds Oil as an Antibacterial Topical Preparation
Cardamom is one of the Indonesian herbs that produce essential oil which is known to have various pharmacological properties such as antioxidant, antifungal, antiviral, and antibacterial. Cardamom essential oil (CEO) in this study was obtained by ultrasonic-assisted extraction-hydrodistillation (UAE-HD). For practical topical application, nano cream formulation was developed. This study aimed to observe the CEO antibacterial activity in nano cream preparation with the variation of Hydrophile-Lipophile Balance (HLB) with values 10, 11, 12 and oil concentrations 2.5%, 5%, 7%, 10%, and 15%. CEO nano cream presented inhibition zone 6.03-15.23 mm against Escherichia coli and 11.13-15.23 mm against Staphylococcus aureus. The antibacterial activity in CEO was due to the main constituent that was 1,8-cineol. The particle size and zeta potential produced by the nano cream formulation ranged from 114,3 – 341,53 nm and 73,43 – 94,70 mV, respectively. The physical properties of CEO nanocream were as follows, pH 4.30-6.45; spreadability 5.1-6.9 cm; and viscosity 5210-6910 cP and showed excellent stability for 4 weeks. The best formulation was the formulation with the highest antibacterial activity in order to provide good efficacy. The formulation with CEO concentration 15%; HLB 12 possessed inhibition zone 10.2 mm and 11.4 mm for E. coli and S. aureus, respectively. The average particle size was 270.40 ± 0.38 nm and zeta potential -88.70 ± 0.20 mV, wherein still meets the nanoemulsion size range that enable penetrated into stratum corneum. This concluded that cardamom essential nano cream can be considered a potential antibacterial topical preparation.
- 19 October 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (3)
Synthesis and characterization of green urethane non‐isocyanate from oleic acid for wood composite application
Conventional polyurethane (PU) is usually synthesized by a reaction between isocyanate and polyol. The use of isocyanate compounds is associated with significant health and environmental problems. Therefore, it is necessary to develop an environmentally friendly alternative method for manufacturing PUs without isocyanate routes. The aim of this research work was to synthesize green urethane from oleic acid, which included the following three stages: the synthesis of epoxidized oleic acid (EOA), the synthesis of carbonated oleic acid (COA), and the synthesis of green urethane from oleic acid (UOA). The resulting product was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Nuclear Magnetic Resonance (NMR) analyses, and by determining the iodine number, oxirane number, and hydroxyl value. The results of FTIR and NMR showed that EOA was successfully synthesized. The optimum COA synthesis process was obtained on TBAB catalyst usage of 1% (wt/wt) at 140°C for 48 h with a 500‐rpm stirring rate and CO2 gas flow rate of 0.2 mL/min with the resulting COA oxirane value of 0.00. The optimum condition of UOA synthesis through the aminolysis process resulted in the use of LiCl of 19.8% (wt/wt) at 70°C for 3 h with a stirring speed of 1200 rpm with a UOA hydroxyl number generated of 237.93 mg/mL.
- 19 October 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (3)
Synthesis and characterization of green urethane non‐isocyanate from oleic acid for wood composite application
Conventional polyurethane (PU) is usually synthesized by a reaction between isocyanate and polyol. The use of isocyanate compounds is associated with significant health and environmental problems. Therefore, it is necessary to develop an environmentally friendly alternative method for manufacturing PUs without isocyanate routes. The aim of this research work was to synthesize green urethane from oleic acid, which included the following three stages: the synthesis of epoxidized oleic acid (EOA), the synthesis of carbonated oleic acid (COA), and the synthesis of green urethane from oleic acid (UOA). The resulting product was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Nuclear Magnetic Resonance (NMR) analyses, and by determining the iodine number, oxirane number, and hydroxyl value. The results of FTIR and NMR showed that EOA was successfully synthesized. The optimum COA synthesis process was obtained on TBAB catalyst usage of 1% (wt/wt) at 140°C for 48 h with a 500‐rpm stirring rate and CO2 gas flow rate of 0.2 mL/min with the resulting COA oxirane value of 0.00. The optimum condition of UOA synthesis through the aminolysis process resulted in the use of LiCl of 19.8% (wt/wt) at 70°C for 3 h with a stirring speed of 1200 rpm with a UOA hydroxyl number generated of 237.93 mg/mL.
- Open Access
- 9 June 2022
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 19, 2204-2214
Effect of reaction time on the molecular weight distribution of polyurethane modified epoxy and its properties
- 9 June 2022
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 19, 2204-2214
Open AccessEffect of reaction time on the molecular weight distribution of polyurethane modified epoxy and its properties
- 1 March 2021
- Published by Emerald Publishing in Bioinspired, Biomimetic and Nanobiomaterials
- Vol. 10 (1) , 1-7
Preparation and characterization of edible films from starch nanoparticles and chitosan
This study aimed to investigate the properties of edible films derived from the biocomposites of starch nanoparticles (SNPs) and chitosan. Chitosan was prepared in concentrations of 1.5, 2.0 and 3.0 wt%. The SNPs and film properties were investigated. The functional group of SNPs and chitosan as the edible film was evaluated. Then, the morphological structure, mechanical properties, thermal behavior and contact angles of the obtained films were also investigated. The data were subjected to a general linear model, and analysis of variance was carried out by using the SPSS version 23 software. The results from the research demonstrated that the solubility in water and the degree of swelling increased after the utilization of SNPs. Additionally, there was less tensile strength and higher elongation after the use of SNPs. Scanning electron microscopy analysis exhibited a smoother surface, and there was no formation of cracks when the starch transformed into nanoparticles. However, the addition of chitosan in SNPGC resulted in a grainy structure with irregularity on the surface of the films. Chitosan enhanced the degree of contact angles to 70.65 ± 2.90°, indicating an increase in the hydrophobicity of the films. This research suggested that the biocomposite films derived from SNPs–chitosan showed better performance.
- 1 March 2021
- Published by Emerald Publishing in Bioinspired, Biomimetic and Nanobiomaterials
- Vol. 10 (1) , 1-7
Preparation and characterization of edible films from starch nanoparticles and chitosan
This study aimed to investigate the properties of edible films derived from the biocomposites of starch nanoparticles (SNPs) and chitosan. Chitosan was prepared in concentrations of 1.5, 2.0 and 3.0 wt%. The SNPs and film properties were investigated. The functional group of SNPs and chitosan as the edible film was evaluated. Then, the morphological structure, mechanical properties, thermal behavior and contact angles of the obtained films were also investigated. The data were subjected to a general linear model, and analysis of variance was carried out by using the SPSS version 23 software. The results from the research demonstrated that the solubility in water and the degree of swelling increased after the utilization of SNPs. Additionally, there was less tensile strength and higher elongation after the use of SNPs. Scanning electron microscopy analysis exhibited a smoother surface, and there was no formation of cracks when the starch transformed into nanoparticles. However, the addition of chitosan in SNPGC resulted in a grainy structure with irregularity on the surface of the films. Chitosan enhanced the degree of contact angles to 70.65 ± 2.90°, indicating an increase in the hydrophobicity of the films. This research suggested that the biocomposite films derived from SNPs–chitosan showed better performance.
- 28 November 2018
- Published by SAGE Publications in Plastics, Rubber and Composites: Macromolecular Engineering
- Vol. 48 (2) , 82-92
Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite
The effects of lignin on mechanical, biodegradability, morphology, and thermal properties of PP/PLA/lignin were investigated. PP/PLA/lignin film were manufactured by adding PP, PLA, lignin and compatibilizer into rheomix at 200°C, at 70 rev min−1 for 30 minthen pressed using Hydraulic Hot Press at 200°C–210°C, at 6 bar for 20 min. The functional groups of PP/PLA/lignin were analyzed using FTIR. The surface morphology, mechanical properties and thermal stability was measured by SEM, tensile strenght and TGA respectively. TThe FTIR intensity of vibration peak of –CH3 cm-1 from PP/lignin and PP/PLA/lignin at 997–993, 1458–1451 and 2966–2904 cm-1 was lower than neat PP. The addition of lignin into PP/lignin, PLA/lignin and PP/PLA/lignin can reduce tensile strength and elongation at break. The thermal stability PP/PLA/lignin was lower than the PP/lignin but higher compared to PP/PLA biocomposites. The biodegradability of PP/PLA/lignin biocomposites was two times higher than that of PP/lignin.
- 28 November 2018
- Published by SAGE Publications in Plastics, Rubber and Composites: Macromolecular Engineering
- Vol. 48 (2) , 82-92
Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite
The effects of lignin on mechanical, biodegradability, morphology, and thermal properties of PP/PLA/lignin were investigated. PP/PLA/lignin film were manufactured by adding PP, PLA, lignin and compatibilizer into rheomix at 200°C, at 70 rev min−1 for 30 minthen pressed using Hydraulic Hot Press at 200°C–210°C, at 6 bar for 20 min. The functional groups of PP/PLA/lignin were analyzed using FTIR. The surface morphology, mechanical properties and thermal stability was measured by SEM, tensile strenght and TGA respectively. TThe FTIR intensity of vibration peak of –CH3 cm-1 from PP/lignin and PP/PLA/lignin at 997–993, 1458–1451 and 2966–2904 cm-1 was lower than neat PP. The addition of lignin into PP/lignin, PLA/lignin and PP/PLA/lignin can reduce tensile strength and elongation at break. The thermal stability PP/PLA/lignin was lower than the PP/lignin but higher compared to PP/PLA biocomposites. The biodegradability of PP/PLA/lignin biocomposites was two times higher than that of PP/lignin.