In vitro tribological behavior of Mg2Zn1Mn/HA-Al 2 O 3 nano-biocomposites
- 19 January 2026
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 68 (2) , 377-398
Abstract
Magnesium biocomposites reinforced with biocompatible ceramic particles are considered promising biomaterials for orthopedic applications due to their biodegradability and compatibility with bone regeneration. In addition to mechanical and corrosion performance, the in vitro wear behavior of these materials is critical for implant components subjected to frictional loading. In this study, the sliding wear behavior of Mg2Zn1Mn nano-biocomposites reinforced with hydroxyapatite (HA) and alumina (Al 2 O 3 ) nanoparticles was investigated under a 10 N load in both dry and simulated body fluid (SBF) environments. The influence of reinforcement content and sintering route (one-step and two-step) on wear performance was examined. The results revealed that wear losses were higher in SBF than in dry conditions, due to simultaneous corrosion-assisted wear, as well as the incorporation of 6 wt.% HA and Al 2 O 3 nanoparticles, together with two-step sintering, improved in vitro wear resistance by 33.9 %. Scanning electron microscopy analyses showed that abrasive and oxidative wear dominated under dry sliding conditions, whereas corrosive wear became the primary mechanism in SBF. These findings demonstrate that dual ceramic reinforcement significantly enhances the wear resistance of Mg2Zn1Mn biocomposites, particularly in physiological environments.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (223M362)
This publication has 73 references indexed in Scilit:
- Investigating the Bio-tribological Aspects of Novel Squeeze Rheo Casted Magnesium Alloy Composites for Orthopedic Implant ApplicationsJOM, 2024
- Investigating the wear performance of AZ91D magnesium composites with ZnO, MnO, and TiO2 nanoparticlesThe International Journal of Advanced Manufacturing Technology, 2023
- Wear Performance of TiB2-Reinforced AZ91 Magnesium Metal Matrix Composite Fabricated by Ultrasonic Stir-Casting ProcessJOM, 2023
- Effect of pH Value on Wear Behavior of AZ80 Magnesium Alloy in Simulated Body FluidJournal of Materials Engineering and Performance, 2022
- Processing, Characterization, and In Vitro Corrosion Behavior of Mg-TiB2 Composite for Orthopedic ApplicationsJOM, 2022
- Quantitative Evaluation of the Interaction Between Wear and Corrosion on Mg-3Gd-1Zn Alloy in Simulated Body FluidJournal of Materials Engineering and Performance, 2018
- The Influence of Zn Content on the Corrosion and Wear Performance of Mg-Zn-Ca Alloy in Simulated Body FluidJournal of Materials Engineering and Performance, 2016
- Bioactive ceramics: processing, structures and propertiesJournal of Materials Science, 2011
- Effect of Process Parameters on Microstructure and Micro-hardness of AZ91/Al2O3 Surface Composite Produced by FSPJournal of Materials Engineering and Performance, 2011
- Microstructure and mechanical properties of Mg-HAP compositesBulletin of Materials Science, 2010