Understanding the Mixing in the Inconel–GRCop-42 Interface Fabricated by Laser Powder Bed Fusion
Open Access
Abstract
Laser powder bed fusion (LPBF) enables fabrication of complex bimetallic structures, such as combustion chambers, that require a thermally conductive internal liner supported by a high-strength structural jacket. Inconel 625 (IN625) served as the substrate, with GRCop-42, a Cu-Cr-Nb alloy developed by NASA Glenn Research Center, deposited with varying laser powers and laser scanning speeds to create the IN625–GRCop-42 interface. Hot isostatic pressing (HIP) was performed to evaluate defect mitigation, and Vickers microhardness testing was conducted to assess the mechanical properties across the bimetallic interface. Microstructure characterization revealed porosity across the full processing window and, along with density measurements, we were able to establish that the HIP treatment was unsuccessful in eliminating the defects, indicating that densification is primarily achieved by LPBF process optimization. Microhardness testing showed that the as-printed samples showed higher microhardness values than the as-HIPped samples due to the fine microstructure, high dislocation density and residual stresses caused by the LPBF process. The decrease in microhardness following HIP suggests that recrystallization, grain coarsening and residual stress relief may have occurred during post-processing. These results highlight the importance of LPBF process optimization in achieving strong, thermally stable IN625–GRCop-42 bimetallic interfaces. This study investigates the microstructural and mechanical behavior of the IN625 and GRCop-42 dissimilar metal interfaces fabricated using the LPBF process and the effects of HIP on the bimetallic microstructure.Keywords
All Related Versions
Funding Information
- National Science Foundation (2338253)
This publication has 23 references indexed in Scilit:
- Tailoring the microstructure, physical, and mechanical properties of pure copper using various additive manufacturing techniquesJournal of Alloys and Compounds, 2024
- GRCop-42: Comparison between laser powder bed fusion and laser powder direct energy depositionAdditive Manufacturing Letters, 2024
- Size effect characteristics and influences on fatigue behavior of laser powder bed fusion of thin wall GRCop-42 copper alloyHeliyon, 2024
- Temperature-Dependent Reflectance of Copper with Different Surface Conditions Measured at 1064 nmJournal of Materials Engineering and Performance, 2023
- Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimizationAdvanced Powder Materials, 2023
- Remarkable enhancement in thermal conductivity of stainless-steel leveraging metal composite via laser powder bed fusion: 316L-Cu compositeAdditive Manufacturing, 2023
- Quantification of porosity and microstructure and their effect on quasi-static and dynamic behavior of additively manufactured Inconel 718Additive Manufacturing, 2020
- Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applicationsAdditive Manufacturing, 2019
- Limits and solutions in processing pure Cu via selective laser melting using a high-power single-mode fiber laserThe International Journal of Advanced Manufacturing Technology, 2019
- Selective Laser Melting of Pure CopperJOM, 2017