Abstract
The article presents a case study focused on working activity of a commercially produced mobile working machine. This machine serves as a wood semi-automatic splitting machine. Its function consists in transporting a wood log to the machine, where the operator cuts it into selected lengths of blocks using a chainsaw. The cut logs are subsequently split using a splitting wedge controlled by a hydraulic piston. The saw, the hydraulic piston and the belt conveyor are driven hydraulically from a pump driven by an electric motor with an output of 9.5 kW. The machine manufacturer states in the documentation that the processing capacity of wooden logs is 5 to 8 m3·h-1. However, this figure is impossible to achieve in real operation, when experimental work managed to process a maximum of 1 m3·h-1. The main reason why it was not possible to converge to the manufacturer's theoretical values was explained by the difference in the input data. The machine manufacturer states in the documentation that the maximum diameter of the input log is 500 mm. A log of this size will not actually fit into the machine. Even when using the maximum diameter of the log that can be inserted into the machine (approx. 450 mm), there is a problem with its transportation. The semi-automatic splitting machine is sold together with an input roller conveyor 1 meter long without a drive. Therefore, it is necessary to manually transport the log to the machine up to the saw, which represents approximately another meter of distance along the sheet metal part of the machine structure with significant friction. Manual transport of the log was replaced by purchasing an additional belt conveyor driven by a hydraulic motor as a replacement for the original roller conveyor. The log either hit the machine structure or it was stopped by passive resistances when the conveyor slipped. Therefore, it is necessary to modify the input conveyor consisting in the design of the chain conveyor chains.