Stanislav Semenov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Stanislav Semenov has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Evgeny Mikhailov
Department of Logistics and Transport Safety, Volodymyr Dahl East Ukrainian National University, Kyiv, Ukraine
19 shared publications - Ján Dižo
Faculty of Mechanical Engineering, University of Zilina, 17. Univerzitna 8215/1, 010 26 Zilina, Slovakia
17 shared publications - Miroslav Blatnický
Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia
17 shared publications - Juraj Gerlici
Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia
4 shared publications - Kateryna Kravchenko
University of Žilina, Faculty of Mechanical Engineering, Žilina, Slovak Republic
4 shared publications - Sergii Kliuiev
Department of Logistics and Transport Safety, Volodymyr Dahl East Ukrainian National University, Kyiv, Ukraine
4 shared publications
Latest Publications
- Open Access
- 21 September 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (9) , 808
Application of Optimization Algorithms in Design of Railway Vehicles: Review of Selected Methods
The design of modern railway vehicles is increasingly inseparable from advanced computation and programming. As engineering challenges become more complex, sophisticated numerical algorithms and powerful computational tools enable designers to solve problems that would otherwise be difficult, time-consuming, or even impossible to address using conventional methods. The global trend toward algorithm-based design and analysis is rapidly transforming the railway industry. Virtual prototypes and computer simulations have become essential elements of high-quality railway vehicle development. These simulations support a wide range of analyses, including statics, kinematics, dynamics, strength, durability, and reliability, covering both complete vehicles and their individual subsystems. Modern simulation tools can therefore provide comprehensive insight into the mechanical behavior of railway vehicles while also accounting for aspects related to technology, materials, operation, and other key engineering requirements. Against this background, the main objective of this study is to provide a comprehensive overview of computational optimization methods used in railway vehicle design. This study reviews the most widely applied numerical optimization procedures that have established a significant position in contemporary engineering practice and are particularly relevant to railway vehicle designers. The presented work describes the fundamental principles of the optimization process in railway vehicle design and provides a mathematical formulation of optimization problems. Particular attention is given to the optimization of the modal and spectral properties of railway vehicles, as well as to topology optimization, which offers new possibilities for developing lightweight and structurally efficient components. Three representative optimization problems are investigated to demonstrate the practical potential of these methods: the optimization of a corrugated sheet-metal structure, the main load-bearing rectangular profile of an open wagon, and a strut structure supporting the roof of a hopper wagon. In all three cases, the optimization objective was to minimize structural mass while preserving the required functional and mechanical properties. The results demonstrate the considerable potential of computational optimization in railway vehicle design. When an appropriate optimization method is selected and correctly applied, significant reductions in material consumption—and consequently in production costs—can be achieved without compromising the structural performance required for safe and reliable long-term operation. These findings highlight the important role of computational optimization as a powerful tool for developing lighter, more economical, and more efficient railway vehicles.
- 21 September 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (9) , 808
Open AccessApplication of Optimization Algorithms in Design of Railway Vehicles: Review of Selected Methods
The design of modern railway vehicles is increasingly inseparable from advanced computation and programming. As engineering challenges become more complex, sophisticated numerical algorithms and powerful computational tools enable designers to solve problems that would otherwise be difficult, time-consuming, or even impossible to address using conventional methods. The global trend toward algorithm-based design and analysis is rapidly transforming the railway industry. Virtual prototypes and computer simulations have become essential elements of high-quality railway vehicle development. These simulations support a wide range of analyses, including statics, kinematics, dynamics, strength, durability, and reliability, covering both complete vehicles and their individual subsystems. Modern simulation tools can therefore provide comprehensive insight into the mechanical behavior of railway vehicles while also accounting for aspects related to technology, materials, operation, and other key engineering requirements. Against this background, the main objective of this study is to provide a comprehensive overview of computational optimization methods used in railway vehicle design. This study reviews the most widely applied numerical optimization procedures that have established a significant position in contemporary engineering practice and are particularly relevant to railway vehicle designers. The presented work describes the fundamental principles of the optimization process in railway vehicle design and provides a mathematical formulation of optimization problems. Particular attention is given to the optimization of the modal and spectral properties of railway vehicles, as well as to topology optimization, which offers new possibilities for developing lightweight and structurally efficient components. Three representative optimization problems are investigated to demonstrate the practical potential of these methods: the optimization of a corrugated sheet-metal structure, the main load-bearing rectangular profile of an open wagon, and a strut structure supporting the roof of a hopper wagon. In all three cases, the optimization objective was to minimize structural mass while preserving the required functional and mechanical properties. The results demonstrate the considerable potential of computational optimization in railway vehicle design. When an appropriate optimization method is selected and correctly applied, significant reductions in material consumption—and consequently in production costs—can be achieved without compromising the structural performance required for safe and reliable long-term operation. These findings highlight the important role of computational optimization as a powerful tool for developing lighter, more economical, and more efficient railway vehicles.
- Open Access
- 4 July 2025
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 25 (3) , 374-382
Features of Locomotive Adhesive Mass Utilization in a Braking Mode
The magnitude of a locomotive's traction and braking forces is directly related to its adhesive mass, which largely determines its tractive and braking characteristics. Therefore, an important task is to maximize the utilization of the locomotive's adhesive mass. The degree of adhesive mass utilization is determined by more factors and is quantitatively characterized by the Adhesive Mass Utilization Coefficient (AMUC). One of the ways to increase the AMUC is to improve the locomotive's lever-type brake transmission. In braking mode, it interacts with the wheelsets and the bogie frame and may block the operation of the first stage of the suspension system. This research presents the results of a mathematical model-based study of the influence of certain parameters of the lever brake transmission on the utilization of locomotive adhesive mass in braking mode. The calculations were carried out for various values of the vertical stiffness of the brake transmission. The results indicate that the distribution of vertical loads across the locomotive's wheelsets in braking mode significantly depends on the vertical stiffness of the brake transmission.
- 4 July 2025
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 25 (3) , 374-382
Open AccessFeatures of Locomotive Adhesive Mass Utilization in a Braking Mode
The magnitude of a locomotive's traction and braking forces is directly related to its adhesive mass, which largely determines its tractive and braking characteristics. Therefore, an important task is to maximize the utilization of the locomotive's adhesive mass. The degree of adhesive mass utilization is determined by more factors and is quantitatively characterized by the Adhesive Mass Utilization Coefficient (AMUC). One of the ways to increase the AMUC is to improve the locomotive's lever-type brake transmission. In braking mode, it interacts with the wheelsets and the bogie frame and may block the operation of the first stage of the suspension system. This research presents the results of a mathematical model-based study of the influence of certain parameters of the lever brake transmission on the utilization of locomotive adhesive mass in braking mode. The calculations were carried out for various values of the vertical stiffness of the brake transmission. The results indicate that the distribution of vertical loads across the locomotive's wheelsets in braking mode significantly depends on the vertical stiffness of the brake transmission.
- 21 May 2025
- Published by Latvia University of Life Sciences and Technologies
- Vol. 24
Design of chains of chain conveyor as part of mobile working machine modification
The article presents a case study focused on working activity of a commercially produced mobile working machine. This machine serves as a wood semi-automatic splitting machine. Its function consists in transporting a wood log to the machine, where the operator cuts it into selected lengths of blocks using a chainsaw. The cut logs are subsequently split using a splitting wedge controlled by a hydraulic piston. The saw, the hydraulic piston and the belt conveyor are driven hydraulically from a pump driven by an electric motor with an output of 9.5 kW. The machine manufacturer states in the documentation that the processing capacity of wooden logs is 5 to 8 m3·h-1. However, this figure is impossible to achieve in real operation, when experimental work managed to process a maximum of 1 m3·h-1. The main reason why it was not possible to converge to the manufacturer's theoretical values was explained by the difference in the input data. The machine manufacturer states in the documentation that the maximum diameter of the input log is 500 mm. A log of this size will not actually fit into the machine. Even when using the maximum diameter of the log that can be inserted into the machine (approx. 450 mm), there is a problem with its transportation. The semi-automatic splitting machine is sold together with an input roller conveyor 1 meter long without a drive. Therefore, it is necessary to manually transport the log to the machine up to the saw, which represents approximately another meter of distance along the sheet metal part of the machine structure with significant friction. Manual transport of the log was replaced by purchasing an additional belt conveyor driven by a hydraulic motor as a replacement for the original roller conveyor. The log either hit the machine structure or it was stopped by passive resistances when the conveyor slipped. Therefore, it is necessary to modify the input conveyor consisting in the design of the chain conveyor chains.
- 21 May 2025
- Published by Latvia University of Life Sciences and Technologies
- Vol. 24
Design of chains of chain conveyor as part of mobile working machine modification
The article presents a case study focused on working activity of a commercially produced mobile working machine. This machine serves as a wood semi-automatic splitting machine. Its function consists in transporting a wood log to the machine, where the operator cuts it into selected lengths of blocks using a chainsaw. The cut logs are subsequently split using a splitting wedge controlled by a hydraulic piston. The saw, the hydraulic piston and the belt conveyor are driven hydraulically from a pump driven by an electric motor with an output of 9.5 kW. The machine manufacturer states in the documentation that the processing capacity of wooden logs is 5 to 8 m3·h-1. However, this figure is impossible to achieve in real operation, when experimental work managed to process a maximum of 1 m3·h-1. The main reason why it was not possible to converge to the manufacturer's theoretical values was explained by the difference in the input data. The machine manufacturer states in the documentation that the maximum diameter of the input log is 500 mm. A log of this size will not actually fit into the machine. Even when using the maximum diameter of the log that can be inserted into the machine (approx. 450 mm), there is a problem with its transportation. The semi-automatic splitting machine is sold together with an input roller conveyor 1 meter long without a drive. Therefore, it is necessary to manually transport the log to the machine up to the saw, which represents approximately another meter of distance along the sheet metal part of the machine structure with significant friction. Manual transport of the log was replaced by purchasing an additional belt conveyor driven by a hydraulic motor as a replacement for the original roller conveyor. The log either hit the machine structure or it was stopped by passive resistances when the conveyor slipped. Therefore, it is necessary to modify the input conveyor consisting in the design of the chain conveyor chains.
- Open Access
- 1 January 2025
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 15 (1)
Design of shafts of a two-piece chain conveyor as a part of a modification of a mobile working machine
When purchasing a professional woodworking mobile working machine, the expected result is trouble-free deployment and its use while meeting the specified goals. These goals could be characterized by advertising propositions and a manual that is supplied with a machine. However, even multiple complaints do not necessarily mean that an unfavourable condition has been corrected. Therefore, there is a gap that the research team decided to address with the research described in this article in question. It is a continuation of a more extensive investigation, since the optimization of a semi-automatic mechanism of the machine is a complex issue. The article describes the problems that arise when handling wooden logs during transport to the machine’s working area. This mainly concerns the failure to comply with the possibility of inserting the prescribed maximum diameter of the log and also the inoperability of the transport even when using logs of smaller diameters. The original roller transport system driven by the human power was replaced by a hydraulically driven belt conveyor directly from the machine manufacturer. Even this modification did not ensure the possibility of at least sufficient manipulation of the logs. Therefore, a special adapted two-piece chain conveyor was designed. This presented work deals with the design its two shafts. The design was carried out using the principles of construction, analytical and numerical, functional and dimensional calculations, which ensure its safe use. The model was subsequently manufactured and the solved machine was equipped with it. All steps confirmed the correctness of the design, which already meets the operational requirements of reliability and safety.
- 1 January 2025
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 15 (1)
Open AccessDesign of shafts of a two-piece chain conveyor as a part of a modification of a mobile working machine
When purchasing a professional woodworking mobile working machine, the expected result is trouble-free deployment and its use while meeting the specified goals. These goals could be characterized by advertising propositions and a manual that is supplied with a machine. However, even multiple complaints do not necessarily mean that an unfavourable condition has been corrected. Therefore, there is a gap that the research team decided to address with the research described in this article in question. It is a continuation of a more extensive investigation, since the optimization of a semi-automatic mechanism of the machine is a complex issue. The article describes the problems that arise when handling wooden logs during transport to the machine’s working area. This mainly concerns the failure to comply with the possibility of inserting the prescribed maximum diameter of the log and also the inoperability of the transport even when using logs of smaller diameters. The original roller transport system driven by the human power was replaced by a hydraulically driven belt conveyor directly from the machine manufacturer. Even this modification did not ensure the possibility of at least sufficient manipulation of the logs. Therefore, a special adapted two-piece chain conveyor was designed. This presented work deals with the design its two shafts. The design was carried out using the principles of construction, analytical and numerical, functional and dimensional calculations, which ensure its safe use. The model was subsequently manufactured and the solved machine was equipped with it. All steps confirmed the correctness of the design, which already meets the operational requirements of reliability and safety.
- Open Access
- 30 December 2024
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- No. 4(91),p. 134-139
АНАЛІЗ ВПЛИВУ КЛІМАТИЧНИХ УМОВ НА ЕФЕКТИВНІСТЬ РОБОТИ ТА РІВЕНЬ ВИКИДІВ РЕФРИЖЕРАТОРНИХ УСТАНОВОК ВЕЛИКОТОННАЖНОГО ТРАНСПОРТУ
Стаття присвячена вивченню впливу кліматичних умов на особливості експлуатації автомобільних транспортних засобів, які призначені для транспортування швидкопсувних та інших категорій вантажів, з урахуванням роботи рефрижераторних установок. Доставка вантажів даним видом транспорту обумовлена збільшенням його присутності на транспортному ринку Європи та багатьох частин світу. Крім цього, проблеми з авіасполученням та скорочення об’ємів перевезень водними видами, відсутність технічної сумісності вітчизняних залізниць із залізницями країн Євросоюзу дають перевагу доставці вантажів у міжнародному сполученні саме з використанням автомобільного транспорту. Основну увагу при виборі відповідних автотранспортних засобів приділено напівпричепам з рефрижераторним обладнанням з функцією підтримки температурного режиму. З’ясовано, що вплив температури навколишнього середовища прямо впливає на ефективність роботи такого виду транспортного обладнання, постійне збільшення глобальної температури призводить до пропорційного збільшення рівня споживання палива і, як наслідок, впливу на екологію. Вихідними даними для проведення дослідження є показники приладів рефрижераторних установок, вбудованих у бортові системи фіксації температури. Результати вимірювань зчитувались з транспортної одиниці, що виконувала перевезення за заданим маршрутом у певні періоди часу. Зазначено, що всі перевезення виконувались автомобілями з однаковим устаткуванням. Маршрут перевезення був однаковим для всіх поїздок і не включав зміну кліматичних зон чи різкий перепад висоти над рівнем моря, що дозволяло забезпечити найбільшу однорідність даних. Це знижувало можливі похибки, пов'язані з зовнішніми факторами, такими як різка зміна погодних умов або атмосферний тиск. Розглянуто широкий спектр температурних умов навколишнього середовища, від негативних до позитивних значень. Для кожного рейсу фіксували середньодобову температуру на основі показників. У результаті проведеного дослідження було виявлено, що зміна температури навколишнього середовища безпосередньо впливає на ефективність роботи рефрижераторних установок великотоннажного транспорту.
- 30 December 2024
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- No. 4(91),p. 134-139
Open AccessАНАЛІЗ ВПЛИВУ КЛІМАТИЧНИХ УМОВ НА ЕФЕКТИВНІСТЬ РОБОТИ ТА РІВЕНЬ ВИКИДІВ РЕФРИЖЕРАТОРНИХ УСТАНОВОК ВЕЛИКОТОННАЖНОГО ТРАНСПОРТУ
Стаття присвячена вивченню впливу кліматичних умов на особливості експлуатації автомобільних транспортних засобів, які призначені для транспортування швидкопсувних та інших категорій вантажів, з урахуванням роботи рефрижераторних установок. Доставка вантажів даним видом транспорту обумовлена збільшенням його присутності на транспортному ринку Європи та багатьох частин світу. Крім цього, проблеми з авіасполученням та скорочення об’ємів перевезень водними видами, відсутність технічної сумісності вітчизняних залізниць із залізницями країн Євросоюзу дають перевагу доставці вантажів у міжнародному сполученні саме з використанням автомобільного транспорту. Основну увагу при виборі відповідних автотранспортних засобів приділено напівпричепам з рефрижераторним обладнанням з функцією підтримки температурного режиму. З’ясовано, що вплив температури навколишнього середовища прямо впливає на ефективність роботи такого виду транспортного обладнання, постійне збільшення глобальної температури призводить до пропорційного збільшення рівня споживання палива і, як наслідок, впливу на екологію. Вихідними даними для проведення дослідження є показники приладів рефрижераторних установок, вбудованих у бортові системи фіксації температури. Результати вимірювань зчитувались з транспортної одиниці, що виконувала перевезення за заданим маршрутом у певні періоди часу. Зазначено, що всі перевезення виконувались автомобілями з однаковим устаткуванням. Маршрут перевезення був однаковим для всіх поїздок і не включав зміну кліматичних зон чи різкий перепад висоти над рівнем моря, що дозволяло забезпечити найбільшу однорідність даних. Це знижувало можливі похибки, пов'язані з зовнішніми факторами, такими як різка зміна погодних умов або атмосферний тиск. Розглянуто широкий спектр температурних умов навколишнього середовища, від негативних до позитивних значень. Для кожного рейсу фіксували середньодобову температуру на основі показників. У результаті проведеного дослідження було виявлено, що зміна температури навколишнього середовища безпосередньо впливає на ефективність роботи рефрижераторних установок великотоннажного транспорту.
- Open Access
- 30 December 2024
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- No. 4(91),p. 125-133
АНАЛІЗ ЗАСОБІВ КОНТРОЛЮ ТА УПРАВЛІННЯ ЯКІСТЮ ПЕРЕВЕЗЕНЬ ВАНТАЖІВ АВТОМОБІЛЬНИМ ТРАНСПОРТОМ
Стаття присвячена огляду наукових досліджень, пов’язаних з питаннями якості транспортування вантажів автомобільним транспортом в Україні. Розглянуто найбільш поширені методи та засоби, що забезпечують управління якістю. Розкрито поняття якості послуги, а також розглянуто класичні та новітні методи управління якістю. При цьому забезпечення якості послуг при транспортуванні вантажів залишається важливим завданням у сучасному світі, оскільки це безпосередньо впливає на безпеку вантажів, задоволеність замовників, збереження довкілля та в цілому на економічний розвиток країни. В ході аналізу виявлена значна кількості напрацювань, а також результатів досліджень, що направлені на опис та вивчення особливостей процесу управління якістю. Підкреслена важливість підходу перевізників вантажів до налагодження процесу управління якістю перевезень, внаслідок якого галузь стикається зі значними викликами і проблемами, які вимагають додаткової уваги та ретельного дослідження. Також звернено увагу на ключові аспекти, які потрібно врахувати при вивченні цього напряму. Зазначено, що незважаючи на наявність багатьох розробок із застосування логістичного підходу до управління якістю продукції чи транспортних послуг, проблема інтеграції управління якістю та логістики вимагає уточнення теоретичних основ їх реалізації та визначення основних принципів формування. Підкреслена можливість сучасних наукових методів здійснювати контроль якості та задовільно керувати якістю перевезень вантажів, розробляти стратегії для зменшення ризиків та вдосконалювати інфраструктуру для забезпечення надійності та ефективності автомобільних перевезень. Використання цих технічних рішень в автотранспортній галузі дозволить підвищити ефективність процесів управління якістю вантажних перевезень автомобільним транспортом без великих фінансових вкладень та зусиль.
- 30 December 2024
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- No. 4(91),p. 125-133
Open AccessАНАЛІЗ ЗАСОБІВ КОНТРОЛЮ ТА УПРАВЛІННЯ ЯКІСТЮ ПЕРЕВЕЗЕНЬ ВАНТАЖІВ АВТОМОБІЛЬНИМ ТРАНСПОРТОМ
Стаття присвячена огляду наукових досліджень, пов’язаних з питаннями якості транспортування вантажів автомобільним транспортом в Україні. Розглянуто найбільш поширені методи та засоби, що забезпечують управління якістю. Розкрито поняття якості послуги, а також розглянуто класичні та новітні методи управління якістю. При цьому забезпечення якості послуг при транспортуванні вантажів залишається важливим завданням у сучасному світі, оскільки це безпосередньо впливає на безпеку вантажів, задоволеність замовників, збереження довкілля та в цілому на економічний розвиток країни. В ході аналізу виявлена значна кількості напрацювань, а також результатів досліджень, що направлені на опис та вивчення особливостей процесу управління якістю. Підкреслена важливість підходу перевізників вантажів до налагодження процесу управління якістю перевезень, внаслідок якого галузь стикається зі значними викликами і проблемами, які вимагають додаткової уваги та ретельного дослідження. Також звернено увагу на ключові аспекти, які потрібно врахувати при вивченні цього напряму. Зазначено, що незважаючи на наявність багатьох розробок із застосування логістичного підходу до управління якістю продукції чи транспортних послуг, проблема інтеграції управління якістю та логістики вимагає уточнення теоретичних основ їх реалізації та визначення основних принципів формування. Підкреслена можливість сучасних наукових методів здійснювати контроль якості та задовільно керувати якістю перевезень вантажів, розробляти стратегії для зменшення ризиків та вдосконалювати інфраструктуру для забезпечення надійності та ефективності автомобільних перевезень. Використання цих технічних рішень в автотранспортній галузі дозволить підвищити ефективність процесів управління якістю вантажних перевезень автомобільним транспортом без великих фінансових вкладень та зусиль.
- Open Access
- 11 July 2024
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 26 (3) , B167-B174
Increasing the Traffic Safety Level of Rolling Stock by Wheel Condition Monitoring Using an Automated Measuring Complex
The rail rolling stock undercarriage condition monitoring is proposed by using an automated measuring system, located on the railway track and measuring the specified parameters of the wheels directly, while the train is moving. Regular underc...
- 11 July 2024
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 26 (3) , B167-B174
Open AccessIncreasing the Traffic Safety Level of Rolling Stock by Wheel Condition Monitoring Using an Automated Measuring Complex
The rail rolling stock undercarriage condition monitoring is proposed by using an automated measuring system, located on the railway track and measuring the specified parameters of the wheels directly, while the train is moving. Regular underc...
- Open Access
- 14 February 2024
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 18 (2) , 110-119
Possibilities of improving the safety of rail vehicles with independently rotating wheels
One of the promising ways to achieve high speed and smooth running of rail vehicles during stable movement in straight sections of the track and to improve the characteristics of fitting the vehicles in a curve is the use of independently rotating wheels in their running parts. Such undercarriages are already becoming quite widespread, for example, in urban rail transport vehicles. But independently rotating wheels can rotate in a wheel pair around a common axis with different angular velocities. It follows that during their movement, longitudinal creep forces do not arise, which form the controlling moment and center the wheel pair in the rail track. This can lead to increased angles of attack of the wheels on the rails, increased lateral forces and accelerated wear of the wheels and rails. In turn, this increases the tendency of vehicles with independently rotating wheels to derail by rolling the flange onto the head of the rail. The accumulated global experience of operating similar vehicles confirms this. To overcome the mentioned disadvantages of independently rotating wheels, a number of various technical solutions have been proposed. Some of them relate to ensuring the given elastic-dissipative characteristic of the torsional articulation of the wheels in a wheel pair. A promising direction is the improvement of the characteristics of the connections of wheel pairs with the bogye and bogyes with the vehicle body, the use of mechatronic systems for controlling the position of the wheel pairs in the horizontal plane for their radial installation in curved sections of the track. In this work, attention is paid to the issue of the use in the design of independently rotating wheels of a perspective design scheme that allows independent rotation of the wheel's support surface and its guide surface (flange). The question of the effect of changing the design scheme of the wheel on the safety of movement due to the roll-in of the ridge on the rail head was considered. The influence of a promising design scheme of a wheel in comparison with a traditional design scheme of a wheel on the safety of driving down a rails was investigated. The peculiarities of the distribution of frictional forces in the ridge contact during movement along the rails of the wheels of both design schemes are analyzed. For a wheel of a traditional design scheme, the module and the direction of the friction force vector in the ridge contact are uniquely determined by the geometric characteristics of the contact between the wheel and the rail and the angular speed of the wheel rotation. At the same time, when the wheel of the prospective design scheme moves, the direction and module of the friction force vector of the ridge on the rail also depend on the ratio of the angular velocities of rotation of the supporting surface of the wheel and its guiding surface (flange) around the common axis. The obtained results allow us to draw a conclusion about the expediency of using a promising design scheme in independently rotating wheels to increase the safety of movement of rail vehicles.
- 14 February 2024
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 18 (2) , 110-119
Open AccessPossibilities of improving the safety of rail vehicles with independently rotating wheels
One of the promising ways to achieve high speed and smooth running of rail vehicles during stable movement in straight sections of the track and to improve the characteristics of fitting the vehicles in a curve is the use of independently rotating wheels in their running parts. Such undercarriages are already becoming quite widespread, for example, in urban rail transport vehicles. But independently rotating wheels can rotate in a wheel pair around a common axis with different angular velocities. It follows that during their movement, longitudinal creep forces do not arise, which form the controlling moment and center the wheel pair in the rail track. This can lead to increased angles of attack of the wheels on the rails, increased lateral forces and accelerated wear of the wheels and rails. In turn, this increases the tendency of vehicles with independently rotating wheels to derail by rolling the flange onto the head of the rail. The accumulated global experience of operating similar vehicles confirms this. To overcome the mentioned disadvantages of independently rotating wheels, a number of various technical solutions have been proposed. Some of them relate to ensuring the given elastic-dissipative characteristic of the torsional articulation of the wheels in a wheel pair. A promising direction is the improvement of the characteristics of the connections of wheel pairs with the bogye and bogyes with the vehicle body, the use of mechatronic systems for controlling the position of the wheel pairs in the horizontal plane for their radial installation in curved sections of the track. In this work, attention is paid to the issue of the use in the design of independently rotating wheels of a perspective design scheme that allows independent rotation of the wheel's support surface and its guide surface (flange). The question of the effect of changing the design scheme of the wheel on the safety of movement due to the roll-in of the ridge on the rail head was considered. The influence of a promising design scheme of a wheel in comparison with a traditional design scheme of a wheel on the safety of driving down a rails was investigated. The peculiarities of the distribution of frictional forces in the ridge contact during movement along the rails of the wheels of both design schemes are analyzed. For a wheel of a traditional design scheme, the module and the direction of the friction force vector in the ridge contact are uniquely determined by the geometric characteristics of the contact between the wheel and the rail and the angular speed of the wheel rotation. At the same time, when the wheel of the prospective design scheme moves, the direction and module of the friction force vector of the ridge on the rail also depend on the ratio of the angular velocities of rotation of the supporting surface of the wheel and its guiding surface (flange) around the common axis. The obtained results allow us to draw a conclusion about the expediency of using a promising design scheme in independently rotating wheels to increase the safety of movement of rail vehicles.
- Open Access
- 29 January 2024
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- No. 4(87),p. 159-164
АНАЛІЗ ПЕРЕВЕЗЕНЬ НЕБЕЗПЕЧНИХ ВАНТАЖІВ ЗАЛІЗНИЧНИМ ТРАНСПОРТОМ
Стаття присвячена огляду наукових досліджень, пов’язаних з транспортуванням небезпечних вантажів залізницями. Зазначено, що перевезення вантажів даного напряму з використанням залізничного транспорту потрібно здійснювати з мінімальними ризиками, що можливо лише за умови дотримання встановлених вимог, і є одним з найважливіших видів транспортування. При цьому забезпечення безпеки при транспортуванні вантажів – це актуальне завдання у сучасному світі, оскільки це безпосередньо впливає на безпеку громадян, довкілля та економічний розвиток. Огляд наукових праць даного напряму досліджень показав наявність значної кількості напрацювань і результатів досліджень, що направлені на опис та вивчення особливостей процесів транспортування небезпечних вантажів. Встановлено, що фахівці не лише аналізують та класифікують різноманітні види небезпечних матеріалів, але і проводять детальні дослідження, що присвячені вибору методів та стратегій, які спрямовані на мінімізацію ризиків в процесі перевезень, формуванню аналітичних моделей та проєктуванню мереж. Важливою є спеціфика перевезення небезпечних вантажів залізницею, внаслідок чого галузь стикається зі значними викликами і проблемами, які вимагають додаткової уваги та ретельного дослідження. Проаналізовано ключові аспекти, які потрібно врахувати при вивченні цього напряму. Сучасні наукові дослідження дозволяють вивчити ефективність перевезень подібних вантажів, розробляти стратегії для зменшення ризиків та вдосконалювати інфраструктуру для забезпечення надійності та ефективності залізничних перевезень. Висвітлено основні виклики і проблеми, що стоять перед галуззю перевезення небезпечних вантажів, такі як ризик аварій, забруднення навколишнього середовища, необхідність спеціалізованих інфраструктурних рішень, роль персоналу, а також проблеми в управлінні та моніторингу цих перевезень.
- 29 January 2024
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- No. 4(87),p. 159-164
Open AccessАНАЛІЗ ПЕРЕВЕЗЕНЬ НЕБЕЗПЕЧНИХ ВАНТАЖІВ ЗАЛІЗНИЧНИМ ТРАНСПОРТОМ
Стаття присвячена огляду наукових досліджень, пов’язаних з транспортуванням небезпечних вантажів залізницями. Зазначено, що перевезення вантажів даного напряму з використанням залізничного транспорту потрібно здійснювати з мінімальними ризиками, що можливо лише за умови дотримання встановлених вимог, і є одним з найважливіших видів транспортування. При цьому забезпечення безпеки при транспортуванні вантажів – це актуальне завдання у сучасному світі, оскільки це безпосередньо впливає на безпеку громадян, довкілля та економічний розвиток. Огляд наукових праць даного напряму досліджень показав наявність значної кількості напрацювань і результатів досліджень, що направлені на опис та вивчення особливостей процесів транспортування небезпечних вантажів. Встановлено, що фахівці не лише аналізують та класифікують різноманітні види небезпечних матеріалів, але і проводять детальні дослідження, що присвячені вибору методів та стратегій, які спрямовані на мінімізацію ризиків в процесі перевезень, формуванню аналітичних моделей та проєктуванню мереж. Важливою є спеціфика перевезення небезпечних вантажів залізницею, внаслідок чого галузь стикається зі значними викликами і проблемами, які вимагають додаткової уваги та ретельного дослідження. Проаналізовано ключові аспекти, які потрібно врахувати при вивченні цього напряму. Сучасні наукові дослідження дозволяють вивчити ефективність перевезень подібних вантажів, розробляти стратегії для зменшення ризиків та вдосконалювати інфраструктуру для забезпечення надійності та ефективності залізничних перевезень. Висвітлено основні виклики і проблеми, що стоять перед галуззю перевезення небезпечних вантажів, такі як ризик аварій, забруднення навколишнього середовища, необхідність спеціалізованих інфраструктурних рішень, роль персоналу, а також проблеми в управлінні та моніторингу цих перевезень.
- Open Access
- 24 October 2023
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 25 (4) , B294-B300
Increasing the Efficiency of Transportation of Cargoes with a Cylindrical Shape
One of the most important directions of intensification and increasing the efficiency of the transportation process is to improve the use of the carrying capacity and capacity of vehicles. For this, it is necessary to the choose rational schem...
- 24 October 2023
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 25 (4) , B294-B300
Open AccessIncreasing the Efficiency of Transportation of Cargoes with a Cylindrical Shape
One of the most important directions of intensification and increasing the efficiency of the transportation process is to improve the use of the carrying capacity and capacity of vehicles. For this, it is necessary to the choose rational schem...