Heat Transfer Enhancement and Entropy Generation of Nanofluids Laminar Convection in Microchannels with Flow Control Devices
Open Access
Abstract
The heat transfer enhancement and entropy generation of Al2O3-water nanofluids laminar convective flow in the microchannels with flow control devices (cylinder, rectangle, protrusion, and v-groove) were investigated in this research. The effects of the geometrical structure of the microchannel, nanofluids concentration φ(0%–3%), and Reynolds number Re (50–300) were comparatively studied by means of performance parameters, as well as the limiting streamlines and temperature contours on the modified heated surfaces. The results reveal that the relative Fanning frictional factor f/f0 of the microchannel with rectangle and protrusion devices are much larger and smaller than others, respectively. As the nanofluids concentration increases, f/f0 increases accordingly. For the microchannel with rectangle ribs, there is a transition Re for obtaining the largest heat transfer. The relative Nusselt number Nu/Nu0 of the cases with larger nanofluids concentration are greater. The microchannels with cylinder and v-groove profiles have better heat transfer performance, especially at larger Re cases, while, the microchannel with the protrusion devices is better from an entropy generation minimization perspective. Furthermore, the variation of the relative entropy generation S′/S′0 are influenced by not only the change of Nu/Nu0 and f/f0, but also the physical parameters of working substances.Keywords
Funding Information
- National Natural Science Foundation of China (51506162)
This publication has 43 references indexed in Scilit:
- Experimental investigation on heat transfer characteristics and pressure drop of BPHE (brazed plate heat exchanger) using TiO 2 –water nanofluidExperimental Thermal and Fluid Science, 2016
- Forced convection enhancement in channels with transversal ribs and nanofluidsApplied Thermal Engineering, 2016
- Improved heat transfer and flow resistance achieved with drag reducing Cu nanofluids in the horizontal tube and built-in twisted belt tubesInternational Journal of Heat and Mass Transfer, 2016
- Heat transfer, pressure drop and fouling studies of multi-walled carbon nanotube nano-fluids inside a plate heat exchangerExperimental Thermal and Fluid Science, 2016
- Experimental investigation on the correlation between nano-fluid characteristics and thermal properties of Al 2 O 3 nano-particles dispersed in ethylene glycol–water mixtureInternational Journal of Heat and Mass Transfer, 2016
- Nanofluids spray heat transfer enhancementInternational Journal of Heat and Mass Transfer, 2016
- Single-phase heat transfer enhancement in micro/minichannels using nanofluids: Theory and applicationsApplied Energy, 2016
- Heat transfer characteristics of nanofluids: a reviewInternational Journal of Thermal Sciences, 2007
- Experimental investigation of oxide nanofluids laminar flow convective heat transferInternational Communications in Heat and Mass Transfer, 2006
- Effect of structural character of gold nanoparticles in nanofluid on heat pipe thermal performanceMaterials Letters, 2004