Ping Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ping Li has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Di Zhang
MOE Key Laboratory of Thermo-Fluid Science and Engineering, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Gongnan Xie
School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an, China
1 shared publication Yaodong Ding
MOE Key and Laboratory of Thermo-Fluid Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, China
1 shared publication- Yonghui Xie
State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication Youwei Tan
MOE Key and Laboratory of Thermo-Fluid Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, China
1 shared publication
Latest Publications
- 1 January 2022
- Published by Begell House Inc. Publishers in Heat Transfer Research
- Vol. 53 (9) , 57-71
COUPLING EFFECT OF ARC-SHAPED CONVEX STRUCTURE AND SINUSOIDAL PULSATING FLOW ON THE THERMAL PERFORMANCE OF THE CORRUGATED CHANNEL
The pulsating inflow, as well as corrugated channel, enhances heat transfer due to the periodical destruction of flow and thermal boundary layers. Thus, the coupled effects of inflow pulsating parameters and design parameters of corrugated channel on heat transfer enhancement are needed to be revealed to obtain the favorable augmented performance. In this work, the turbulent flow and heat transfer characteristics in the arc-shaped corrugated channel, with protrusion height of corrugated structure h = 0.94-1.66 mm, amplitude of sinusoidal inlet velocity oscillation A = 0.1-0.9, and frequency of sinusoidal inlet velocity f = 1-50 Hz were studied. Through independent study of the above variables, their respective effects on flow resistance, heat transfer, and thermal performance were revealed. Furthermore, the coupling effect caused by the simultaneous variations of the above variables and the parameter combination corresponding to the best thermal performance were still unclear. Therefore, the thermal performance (TP) was further optimized by means of the intelligent algorithm-based fast optimization method. The results demonstrate that the optimized arc-shaped corrugated channel with pulsating flow can obtained a significant enhancement in heat transfer within an acceptable pressure loss increase compared with the flat channel. The maximum thermal performance increment is 31.7% at Re = 10,000. The dimensionless frequency (Strouhal number) corresponding to the best thermal performance is always between 0.4-0.5 at studied Reynolds numbers. Furthermore, the optimal protrusion height and oscillation frequency gradually increase with the Reynolds number, and the optimal oscillation amplitude always takes the maximum value of the given range.
- 1 January 2022
- Published by Begell House Inc. Publishers in Heat Transfer Research
- Vol. 53 (9) , 57-71
COUPLING EFFECT OF ARC-SHAPED CONVEX STRUCTURE AND SINUSOIDAL PULSATING FLOW ON THE THERMAL PERFORMANCE OF THE CORRUGATED CHANNEL
The pulsating inflow, as well as corrugated channel, enhances heat transfer due to the periodical destruction of flow and thermal boundary layers. Thus, the coupled effects of inflow pulsating parameters and design parameters of corrugated channel on heat transfer enhancement are needed to be revealed to obtain the favorable augmented performance. In this work, the turbulent flow and heat transfer characteristics in the arc-shaped corrugated channel, with protrusion height of corrugated structure h = 0.94-1.66 mm, amplitude of sinusoidal inlet velocity oscillation A = 0.1-0.9, and frequency of sinusoidal inlet velocity f = 1-50 Hz were studied. Through independent study of the above variables, their respective effects on flow resistance, heat transfer, and thermal performance were revealed. Furthermore, the coupling effect caused by the simultaneous variations of the above variables and the parameter combination corresponding to the best thermal performance were still unclear. Therefore, the thermal performance (TP) was further optimized by means of the intelligent algorithm-based fast optimization method. The results demonstrate that the optimized arc-shaped corrugated channel with pulsating flow can obtained a significant enhancement in heat transfer within an acceptable pressure loss increase compared with the flat channel. The maximum thermal performance increment is 31.7% at Re = 10,000. The dimensionless frequency (Strouhal number) corresponding to the best thermal performance is always between 0.4-0.5 at studied Reynolds numbers. Furthermore, the optimal protrusion height and oscillation frequency gradually increase with the Reynolds number, and the optimal oscillation amplitude always takes the maximum value of the given range.
- Open Access
Heat Transfer Enhancement and Entropy Generation of Nanofluids Laminar Convection in Microchannels with Flow Control Devices
The heat transfer enhancement and entropy generation of Al2O3-water nanofluids laminar convective flow in the microchannels with flow control devices (cylinder, rectangle, protrusion, and v-groove) were investigated in this research. The effects of the geometrical structure of the microchannel, nanofluids concentration φ(0%–3%), and Reynolds number Re (50–300) were comparatively studied by means of performance parameters, as well as the limiting streamlines and temperature contours on the modified heated surfaces. The results reveal that the relative Fanning frictional factor f/f0 of the microchannel with rectangle and protrusion devices are much larger and smaller than others, respectively. As the nanofluids concentration increases, f/f0 increases accordingly. For the microchannel with rectangle ribs, there is a transition Re for obtaining the largest heat transfer. The relative Nusselt number Nu/Nu0 of the cases with larger nanofluids concentration are greater. The microchannels with cylinder and v-groove profiles have better heat transfer performance, especially at larger Re cases, while, the microchannel with the protrusion devices is better from an entropy generation minimization perspective. Furthermore, the variation of the relative entropy generation S′/S′0 are influenced by not only the change of Nu/Nu0 and f/f0, but also the physical parameters of working substances.
Open AccessHeat Transfer Enhancement and Entropy Generation of Nanofluids Laminar Convection in Microchannels with Flow Control Devices
The heat transfer enhancement and entropy generation of Al2O3-water nanofluids laminar convective flow in the microchannels with flow control devices (cylinder, rectangle, protrusion, and v-groove) were investigated in this research. The effects of the geometrical structure of the microchannel, nanofluids concentration φ(0%–3%), and Reynolds number Re (50–300) were comparatively studied by means of performance parameters, as well as the limiting streamlines and temperature contours on the modified heated surfaces. The results reveal that the relative Fanning frictional factor f/f0 of the microchannel with rectangle and protrusion devices are much larger and smaller than others, respectively. As the nanofluids concentration increases, f/f0 increases accordingly. For the microchannel with rectangle ribs, there is a transition Re for obtaining the largest heat transfer. The relative Nusselt number Nu/Nu0 of the cases with larger nanofluids concentration are greater. The microchannels with cylinder and v-groove profiles have better heat transfer performance, especially at larger Re cases, while, the microchannel with the protrusion devices is better from an entropy generation minimization perspective. Furthermore, the variation of the relative entropy generation S′/S′0 are influenced by not only the change of Nu/Nu0 and f/f0, but also the physical parameters of working substances.