Refinement of the approach to designing expansion joint parameters for concrete road pavements
- 23 October 2026
- journal article
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (34) , 11-25
Abstract
This paper refines the approach to designing the parameters of expansion joints in concrete road pavements with butt joints between slabs when designing a rigid road surface. This research is relevant because the permissible distance between expansion joints depends on the number and total width of the flexible spacers in the structural cross-section, whereas the existing algorithm requires each structural variant to be recalculated. The study aims to establish generalised relationships for single and multiple expansion joints of the same width and to justify rational structural solutions. During the research, analytical and comparative calculation methods were employed in equal measure. For instance, calculations were performed for a vehicle parking area with a 22 cm thick concrete surface. The structures with a single 30 mm wide joint and two joints of the same width spaced more than 1.5 m apart were then compared. It was found that deformation of the flexible joint, the calculated distance between joints, and the range of operational displacement are directly dependent on the number of joints. However, the condition for sufficient joint width does not depend on this number. Based on the initial assumptions, two joints increase the calculated distance between structural cross-sections, making it possible to reduce the approximate number of cross-sections per kilometre of motorway from 40 to 20. Having analysed the results, it was concluded that the width of the elastic joint filler can be verified once, while the required distance between expansion joints can be determined by selecting the number of joints. These research findings are significant in that they reduce the number of alternative calculations required for practical design work, particularly for concrete pavements with dowel-connected slabs.Keywords
This publication has 2 references indexed in Scilit: