VZVolodymyr Zelenovskyi

Volodymyr Zelenovskyi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Volodymyr Zelenovskyi has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determining the optimal physical-mechanical parameters of epoxy asphalt concrete for road surface to ensure its durability

    by Artur Onyshchenko, Volodymyr Zelenovsky, Vitalii Kovalchuk, Anatolii Tsynka, Volodymyr Kaskiv, Sergii Illiash, Olena Usychenko

    This study investigates the process that ensures durability of road surface by using epoxy asphalt concrete with optimal physical and mechanical characteristics. The task addressed relates to the lack of detailed research into the simultaneous influence of several key factors on the physical and mechanical properties of epoxy asphalt concrete, in particular the content of epoxy components in the bitumen binder, the temperature and duration of hardening. In addition, there is no scientific justification for the optimal mutual combination of these parameters in order to increase the durability of road surface for transport structures. For this purpose, epoxy asphalt concrete was used as a building material for the road surface on transport structures. It was established that due to the thermosetting nature of the epoxy-modified bitumen binder, the material acquires fundamentally higher indicators of rutting resistance, crack resistance, frost resistance, water resistance, and resistance to chemical aggression compared to conventional materials. A full multifactorial experiment was conducted with varying the content of epoxy components in bitumen (5–25) %, curing time (1–14) days, as well as curing temperature (25–60)°C. The influence of these factors on water saturation, compressive strength at temperatures of 20°C and 50°C, indirect tensile strength at a temperature of 0°C was studied. Adequate second-order regression models were built; the relative prediction error is less than 5%. The optimal parameters were established using the desirability function method: the content of epoxy components – 15.0%; curing time – 7 days; curing temperature – 40°C. The rational range is 13–17%, 6–8 days, and 35–55°C. At these values, the regulatory requirements from DBN V.2.3-4:2015, DBN V.2.3-22:2025, and DSTU 9290-5:2020 are exceeded, which contributes to the extension of repair intervals, reduction of operating costs, and increased road safety. These results could also be used in the future to devise technological regulations for the production of epoxy asphalt concrete mixtures for their practical implementation in the road sector

  • Refinement of the approach to designing expansion joint parameters for concrete road pavements

    by Anatolii Tsynka, Vitalii Raikovskyi, Volodymyr Zelenovsky

    This paper refines the approach to designing the parameters of expansion joints in concrete road pavements with butt joints between slabs when designing a rigid road surface. This research is relevant because the permissible distance between expansion joints depends on the number and total width of the flexible spacers in the structural cross-section, whereas the existing algorithm requires each structural variant to be recalculated. The study aims to establish generalised relationships for single and multiple expansion joints of the same width and to justify rational structural solutions. During the research, analytical and comparative calculation methods were employed in equal measure. For instance, calculations were performed for a vehicle parking area with a 22 cm thick concrete surface. The structures with a single 30 mm wide joint and two joints of the same width spaced more than 1.5 m apart were then compared. It was found that deformation of the flexible joint, the calculated distance between joints, and the range of operational displacement are directly dependent on the number of joints. However, the condition for sufficient joint width does not depend on this number. Based on the initial assumptions, two joints increase the calculated distance between structural cross-sections, making it possible to reduce the approximate number of cross-sections per kilometre of motorway from 40 to 20. Having analysed the results, it was concluded that the width of the elastic joint filler can be verified once, while the required distance between expansion joints can be determined by selecting the number of joints. These research findings are significant in that they reduce the number of alternative calculations required for practical design work, particularly for concrete pavements with dowel-connected slabs.

  • Improvement and development of the design of road service facilities on public roads

    by Sergii Rybalchenko, Serhii Illiash, Volodymyr Zelenovsky

    Introduction. The article discusses issues related to the improvement and development of the design of road service facilities — specially equipped places where road users are served and which are located on road administration land or require its use for entry and exit to public roads (hereinafter referred to as motorways). Among them, special attention is paid to road service facilities that constitute a significant part of them and are owned by state organisations — rest areas and public transport stops. Improvements to the design of these facilities were developed based on domestic and international experience and analysis of current domestic and European regulations, building codes, regulatory documents, and technical literature related to the subject of standardisation. Problem statement. The need to improve and develop the design of road service facilities, taking into account modern requirements for their operation, determining the appropriate geometric parameters, characteristics and consumer properties of facilities. Objective. Informing road management specialists about the development of new regulatory documents in the field of road service facility design and justifying the need for their further improvement. Materials and methods. The article uses the findings of the State Enterprise "NIRI" in the field of research, current domestic regulatory and legal acts, building codes and national standards, foreign regulatory and legal acts and regulatory documents, and technical literature on the design of road service facilities. During the development of regulatory documents, domestic and European experience in their design and operation was also taken into account. Results. In order to implement modern developments in the design of road service facilities, DSTU 9325:2025 "Guidelines for the design of rest areas on public roads" and DSTU 9326:2025 "Guidelines for the design of public transport stops on public roads" have been developed, the requirements of which take into account modern approaches to organising road safety and comfort and ensuring inclusiveness, as well as updating road terminology. Conclusions. The general guidelines for the design of road service facilities proposed in the new national standards establish new scientifically based requirements for the parameters, characteristics and consumer properties of facilities, which will contribute to improving road safety and comfort and ensuring inclusiveness.

  • Implementation of outcome-based road maintenance contracts (OPRC) to improve the efficiency of the road sector in Ukraine

    by Oleg Zaviyskyy, Volodymyr Zelenovsky

    Introduction. Current trends in the development of transport infrastructure show the growing role of effective road management mechanisms that ensure high quality of service while optimising the use of financial resources. The article examines the essence, principles and features of Output and Performance-Based Road Contracts (OPRC), which are an effective alternative to traditional forms of contracting based on payment for the volume of work performed. The author emphasises the key problems of the classical approach to road network maintenance, in particular, the lack of incentives for long-term maintenance of the technical condition of assets, insufficient level of innovation and budget overruns. Problem. The traditional system of road maintenance in Ukraine is based on payment for the volume of work performed, which often leads to inefficient use of budget funds, insufficient incentives for contractors to maintain the long-term quality of road assets, and complicates control over the results. Combined with the deterioration of the network and limited funding, these factors create a need for new approaches to road management. Objective. To investigate the essence, principles and effectiveness of OPRC implementation compared to traditional forms of road maintenance, as well as to summarise the results of the first pilot project of this type in Ukraine, taking into account international experience. Materials and methods. The study uses analytical, comparative and systemic approaches, as well as elements of economic analysis. An overview of international practices of OPRC implementation (Canada, Brazil, Australia, and EU countries) was conducted, as well as an analysis of the national pilot project on the M-06 Kyiv-Chop highway (km 434–621) implemented in 2014-2021. Results. It has been established that the implementation of OPRC provides budgetary savings in the range of (10-40) % compared to traditional approaches, contributes to improving the technical condition of road assets and the level of traffic safety. The results-based management model creates clear incentives for contractors to introduce innovative technologies and effective planning, increases transparency of interaction between the customer and the contractor, and improves the quality of road services for users. Conclusions. Performance-based contracts are an effective tool for modernising Ukraine’s road maintenance system. Their widespread use will contribute to the rational use of funds, increase the durability of road surfaces, enhance private sector participation, and improve road safety. The experience of the pilot project on the M-06 confirms the feasibility of scaling up this practice at the national level.

  • Analysis of turning radii of LHV (Тhree -link eurocombi trains) with a total length of more than 25 m

    by Anatolii Tsynka, Serhii Illiash, Vitaliy Raykovskiy, Volodymyr Zelenovsky

    Introduction. The article deals with the issue of analyzing the technical parameters of EuroCombi road trains (overall dimensions, loads on the road pavement structure and transport facilities, etc.) and establishing the possibility of their movement on the state highway. The objective of the study is to analyze the experience of using large and heavy-goods vehicles (overall dimensions, loads on the pavement structure and transport facilities, etc.) with the possibility of their movement on roads of national importance. Materials and methods. The methodological basis is a scientific approach to the analysis of research issues questions through the use of statistical, formal and logical, and complex research methods. The sources of research are the data of completed scientific works and current regulatory documents. Results. In order to introduce modern methods of designing roads using vehicles with a total length of more than 25 m, the parameters of the turning radius (internal, external and path length) and their impact on route planning were analyzed. Conclusions. The conducted research will be used in the design of new roads of national importance, adaptation of existing road infrastructure (turning radii at junctions and intersections), and will also help logisticians in planning LHV routes (three-link road trains of the EuroCombi type) to ensure their safe passage / maneuvering along the route.

  • Improvement of approaches to calculating the distance between expansion joints in road cement concrete pavement

    by Igor Gameliak, Sergii Rybalchenko, Vitaliy Raykovskiy, Volodymyr Zelenovsky

    Introduction. Expansion joints are an integral part of the design of a cement-concrete road surface, as they provide compensation for temperature and shrinkage deformations, preventing uncontrolled crack formation. Rational design of the distance between expansion joints is one of the key factors affecting the durability and load-bearing capacity of the road surface. Incorrect calculation of these parameters can lead to premature failure of the structure, a decrease in its operational reliability, and an increase in repair and maintenance costs [1 – 6]. This article considers the issue of improving approaches to calculating the distance between expansion joints in a cement-concrete surface based on the DSTU draft "Guidelines for the design of rigid road surfaces", which is currently being developed by the SE «NIDI» with the participation of the National Transport University. The proposed methods were developed taking into account the advanced domestic and international experience in designing highways with rigid road surfaces, analysis of current regulatory legal acts, building codes, scientific and technical literature, as well as modern road construction materials and technologies. Special attention is paid to the peculiarities of road and climatic regions of Ukraine, which allows adapting the methodology to real conditions of operation of the road surface. Problem statement. Designing rigid road surfaces is a complex e

  • Problematic issues of ensuring the quality of road construction materials and products in the context of their certification in Ukraine according to DSTU EN ISO/IEC 17065:2019 and the law of Ukraine “On the provision of construction products on the market

    by Andrii Skrypnyk, Mariia Yachnyk, Valerii Vyrozhemskyi, Volodymyr Kaskiv, Volodymyr Zelenovsky

    Introduction. The article examines the importance of certification of road construction materials as one of the main tools for ensuring their quality. Problems. The authors emphasize that the certificate of conformity is a key document that confirms that the products meet the established regulatory requirements. Product certification, which includes laboratory tests and control of the production process, ensures the objectivity of quality assessment. The article describes in detail the stages of the certification process, from submitting an application to technical supervision of certified products. The role of certification bodies, which must be accredited by the National Accreditation Agency of Ukraine (NAAU), is emphasized separately, and their responsibility for the safety and quality of certified road construction materials is also noted. The authors also draw attention to the problem of non-compliance with the quality standards of road construction products in Ukraine, which leads to road defects, such as cracks and subsidence, which can appear already a year after the road is put into operation. In this context, it is emphasized the need to strengthen the quality control of both produced in Ukraine and imported road construction materials. The article also considers the issue of voluntary certification of road construction products, which is carried out at the initiative of the manufacturer or supplier, which is becoming more and more important in the conditions of tender procurement. At the same time, the lack of quality control of products sold through retail networks and the lack of effective quality control of imported road construction materials are emphasized.


  • Prospects for the use of rigid pavement in road construction and improvement of approaches to its design and calculation

    by Anatolii Tsynka, Igor Gameliak, Sergii Rybalchenko, Vitaliy Raykovskiy, Volodymyr Zelenovsky

    Introduction. This article examines the issue of improving the methods of designing and calculating rigid road surfaces, outlined in the DSTU project “Guidelines for the Design of Rigid Road Surfaces” (hereinafter referred to as the DSTU project). The specified methods were developed on the basis of domestic and global experience in the design of highways with rigid road surfaces, analysis of current legal acts, regulatory documents, technical literature related to the object of standardization, taking into account the availability of modern road construction materials and technologies. density of traffic flow, diversity of subsoil, including in complex engineering and geological conditions, peculiarities of road and climatic regions of Ukraine, etc. Problem statement. The need for improvement and a unified approach to the design of rigid road clothing, taking into account the peculiarities of its operation, with the determination of the appropriate parameters depending on the initial data and the effective use of material and technical resources.


  • IMPROVEMENT OF THE REQUIREMENTS FOR THE OPERATIONAL CONDITION OF AUTOMOBILE ROADS

    by Anatolii Tsynka, Serhii Illiash, Serhii Rybalchenko, Volodymyr Zelenovskyi

    Introduction. This article considers the issue of improving the requirements for the operational condition of public highways and streets (hereinafter referred to as highways) and railway and tram crossings based on the analysis of current legal acts, regulatory documents, technical literature, which refers to the objects of standardization, taking into account the requirements for safety and environmental protection at all stages of the road life cycle, in particular operational maintenance. Problem Statement. A significant number of traffic accidents that occurred due to defects in the components of highways require improvement in the organization and conduct of inspections and surveys of highways with the establishment of compliance of a certain number of indicators with regulatory requirements. In addition, the resolution adopted by the UN General Assembly dated 31.08.2020 No. 74/299 «Improving road safety around the world» states that deaths and serious injuries as a result of road traffic accidents can in most cases be prevented on the basis of creating a safer highway infrastructure, which also contributes to the development of regulatory documents that establish modern technical requirements for the operational condition of highways