Woven Thin-Film Metal Interconnects
Authors:
- 1 June 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 31 (7) , 740-742
Abstract
The next step in the evolution of electronic textiles (e-textiles) involves the integration of electronics at the yarn level. We aim to integrate "electronic yarns" into textiles by fabricating thin-film devices and interconnects on plastic strips and weaving them into a fabric using a commercial weaving machine. Since interconnect lines are exposed to very small applied bending radii during weaving, we studied changes in interconnect resistance for applied bending radii ranging from 5 mm to 100 μm. We then wove textiles using different weaving patterns and measured the strip bending radius in the textile. Interconnect lines ruptured at bending radii of 120 μm, corresponding to a tensile bending strain of 16.73 %. The smallest bending radius within the textiles was ~165 μm, making all weaving patterns suitable for e-textile fabrication. Finally, we wove strips with interconnect lines and light-emitting diodes using a commercial weaving machine.Keywords
This publication has 26 references indexed in Scilit:
- Development and evaluation of temperature sensors for textile integration2009
- Embedding and assembly of ultrathin chips in multilayer flex boardsCircuit World, 2008
- Enhanced adhesion of plasma-sputtered copper films on polyimide substrates by oxygen glow discharge for microelectronicsThin Solid Films, 2008
- Fully elastic interconnects on nanopatterned elastomeric substratesIEEE Electron Device Letters, 2006
- Stretchable Interconnects for Elastic Electronic SurfacesProceedings of the IEEE, 2005
- Practical neutral-axis conductor geometries for coated conductor composite wireSuperconductor Science and Technology, 2003
- Amorphous Si TFTs on plastically deformed spherical domesJournal of Non-Crystalline Solids, 2002
- Temperature Measurement2001
- Textile geometry preprocessor for meso-mechanical models of woven compositesComposites Science and Technology, 2000
- To cut or not to cut: a thermomechanical stress analysis of polyimide thin-film on ceramic structuresIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B, 1995