Hydrodeoxygenation of Palm Kernel Shells Derived Bio‐Oil Using Supported Ru and Pd Catalysts
Authors:
- 8 March 2022
- journal article
- research article
- Published by Wiley in ChemistrySelect
- Vol. 7 (10)
Abstract
Biomass‐derived bio‐oil is a renewable liquid fuel that contains a high amount of oxygen with a low calorific value. Hydrodeoxygenation (HDO), as one of the methods to increase the calorific value of bio‐oil, was conducted in an autoclave‐type reactor at 250 °C with an initial H 2 pressure of 20 bar for 4 h using Ru/C and Pd/C catalysts with a metal precursor loading of 1, 3, and 5 wt.%. The HDO reaction using Ru(5 %)/C had a higher degree of deoxygenation (47 %). A higher yield (78 wt.%) of the oil phase was produced after the reaction using Pd(3 %)/C. The HDO reaction using Ru(5 %)/C and Pd(3 %)/C catalysts could increase the calorific value of bio‐oil from 23.3 to 29.8 and 28.5 MJ/kg, respectively.Keywords
This publication has 23 references indexed in Scilit:
- Ultimate and Proximate Correlations for Estimating the Higher Heating Value of Hydrothermal SolidsEnergy & Fuels, 2013
- Catalytic Fast Pyrolysis: A ReviewEnergies, 2013
- Cost effective poly(urethane-imide)-POSS membranes for environmental and energy-related processesClean Technologies and Environmental Policy, 2012
- A review of catalytic upgrading of bio-oil to engine fuelsApplied Catalysis A: General, 2011
- Catalytic pyrolysis of biomass for biofuels productionFuel Processing Technology, 2010
- Hydrotreatment of Fast Pyrolysis Oil Using Heterogeneous Noble-Metal CatalystsIndustrial & Engineering Chemistry Research, 2009
- Hydrodeoxygenation of guaiacol on noble metal catalystsCatalysis Today, 2009
- Hydrogenation and Hydrodeoxygenation of 2-methyl-2-pentenal on supported metal catalystsJournal of Catalysis, 2009
- Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and EngineeringChemical Reviews, 2006
- Production of hydrocarbons by catalytic upgrading of a fast pyrolysis bio-oil. Part I: Conversion over various catalystsFuel Processing Technology, 1995