Dieni Mansur
Research Subjects
Dieni Mansur has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
Sabar Pangihutan Simanungkalit
3 shared publicationsAlisyah Putri Desvi Takahasi
2 shared publicationsAminuddin
Research Center for Process and Manufacturing Industry Technology, National Research and Innovation Agency, B.J. Habibie Science and Techno Park, South Tangerang, Indonesia
2 shared publicationsLatifah Hauli
2 shared publicationsMuhammad Arifuddin Fitriady
Research Center for Chemistry National Research and Innovation Agency Kawasan Puspiptek Serpong Tangerang, Selatan, Banten 15314 Indonesia
2 shared publications- Sabar Pangihutan Simanungkalit
Centre for Energy (M473), The University of Western Australia, Crawley, Australia
2 shared publications
Latest Publications
- Open Access
- 3 December 2025
- Published by Elsevier in Sustainable Chemistry for Climate Action
- Vol. 8
Upcycling of palm fronds and expanded polystyrene waste for producing liquid fuels with enhanced octane rating
- 3 December 2025
- Published by Elsevier in Sustainable Chemistry for Climate Action
- Vol. 8
Open AccessUpcycling of palm fronds and expanded polystyrene waste for producing liquid fuels with enhanced octane rating
- Open Access
- 27 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
Enhanced CO2 adsorption using Cu-MOF/carbon composites from tea twigs via one-step plasma activation
- 27 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessEnhanced CO2 adsorption using Cu-MOF/carbon composites from tea twigs via one-step plasma activation
- Open Access
- 30 October 2025
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 15 (1) , 29-41
Enhancing bio-char calorific value through catalytic pyrolysis: The role of magnesium oxide-zeolite based catalysts
The current research aims to improve the generation of bio-char with elevated higher heating values (HHVs) by utilizing magnesium oxide-zeolite-based catalysts across various temperature conditions. The exploration of biomass catalytic pyrolysis has intensified in the pursuit of sustainable energy solutions. Catalytic pyrolysis offers a technique to convert abundant and renewable biomass resources into valuable biofuels and bio-char, thereby improving energy security and reducing dependence on fossil fuels. The use of suitable catalysts in biomass catalytic pyrolysis is crucial for enhancing the yield of bio-char with higher calorific value. This investigation explores the impact of magnesium oxide-zeolite-based catalysts on the higher heating values of bio-char generated from coconut shells. The initial findings indicate a notable enhancement in the calorific value of bio-char. The HHV increased from 12.03 MJ/kg for untreated coconut shells to 20.06 MJ/kg with ZSM-5, ultimately reaching an impressive 38.11 MJ/kg with the MgO/ZSM-5 catalyst. The results demonstrate that the addition of magnesium oxide significantly improves the energy content of bio-char. Various combinations of magnesium oxide, such as MgO/ZSM-5, MgO/Y2O3/ZSM-5, and MgO/Mn3O4/ZSM-5, are evaluated for their effects on the pyrolysis process. The results demonstrate that the impregnation of metal oxides into zeolite catalysts enhances catalytic performance and facilitates the efficient conversion of coconut shells into high-energy bio-char. The findings highlight the promise of metal oxide-zeolite catalysts in improving bio-char quality and promoting the development of sustainable energy technologies.
- 30 October 2025
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 15 (1) , 29-41
Open AccessEnhancing bio-char calorific value through catalytic pyrolysis: The role of magnesium oxide-zeolite based catalysts
The current research aims to improve the generation of bio-char with elevated higher heating values (HHVs) by utilizing magnesium oxide-zeolite-based catalysts across various temperature conditions. The exploration of biomass catalytic pyrolysis has intensified in the pursuit of sustainable energy solutions. Catalytic pyrolysis offers a technique to convert abundant and renewable biomass resources into valuable biofuels and bio-char, thereby improving energy security and reducing dependence on fossil fuels. The use of suitable catalysts in biomass catalytic pyrolysis is crucial for enhancing the yield of bio-char with higher calorific value. This investigation explores the impact of magnesium oxide-zeolite-based catalysts on the higher heating values of bio-char generated from coconut shells. The initial findings indicate a notable enhancement in the calorific value of bio-char. The HHV increased from 12.03 MJ/kg for untreated coconut shells to 20.06 MJ/kg with ZSM-5, ultimately reaching an impressive 38.11 MJ/kg with the MgO/ZSM-5 catalyst. The results demonstrate that the addition of magnesium oxide significantly improves the energy content of bio-char. Various combinations of magnesium oxide, such as MgO/ZSM-5, MgO/Y2O3/ZSM-5, and MgO/Mn3O4/ZSM-5, are evaluated for their effects on the pyrolysis process. The results demonstrate that the impregnation of metal oxides into zeolite catalysts enhances catalytic performance and facilitates the efficient conversion of coconut shells into high-energy bio-char. The findings highlight the promise of metal oxide-zeolite catalysts in improving bio-char quality and promoting the development of sustainable energy technologies.
- 15 August 2025
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 102 (10)
Valorization of waste polystyrene and palm biomass via co-pyrolysis for gasoline-range fuel production supporting low-carbon transition
- 15 August 2025
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 102 (10)
Valorization of waste polystyrene and palm biomass via co-pyrolysis for gasoline-range fuel production supporting low-carbon transition
- Open Access
- 18 December 2024
- Published by Elsevier in Case Studies in Chemical and Environmental Engineering
- Vol. 11
Optimization of liquid fuel production from co-pyrolysis of oil palm fronds and expanded polystyrene using response surface methodology
- 18 December 2024
- Published by Elsevier in Case Studies in Chemical and Environmental Engineering
- Vol. 11
Open AccessOptimization of liquid fuel production from co-pyrolysis of oil palm fronds and expanded polystyrene using response surface methodology
- 21 March 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (16) , 19203-19214
Insight into catalytic pyrolysis of palm fronds over MFI, BEA, and FAU framework types of zeolite extrudate
- 21 March 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (16) , 19203-19214
Insight into catalytic pyrolysis of palm fronds over MFI, BEA, and FAU framework types of zeolite extrudate
- 8 March 2022
- Published by Wiley in ChemistrySelect
- Vol. 7 (10)
Hydrodeoxygenation of Palm Kernel Shells Derived Bio‐Oil Using Supported Ru and Pd Catalysts
Biomass‐derived bio‐oil is a renewable liquid fuel that contains a high amount of oxygen with a low calorific value. Hydrodeoxygenation (HDO), as one of the methods to increase the calorific value of bio‐oil, was conducted in an autoclave‐type reactor at 250 °C with an initial H 2 pressure of 20 bar for 4 h using Ru/C and Pd/C catalysts with a metal precursor loading of 1, 3, and 5 wt.%. The HDO reaction using Ru(5 %)/C had a higher degree of deoxygenation (47 %). A higher yield (78 wt.%) of the oil phase was produced after the reaction using Pd(3 %)/C. The HDO reaction using Ru(5 %)/C and Pd(3 %)/C catalysts could increase the calorific value of bio‐oil from 23.3 to 29.8 and 28.5 MJ/kg, respectively.
- 8 March 2022
- Published by Wiley in ChemistrySelect
- Vol. 7 (10)
Hydrodeoxygenation of Palm Kernel Shells Derived Bio‐Oil Using Supported Ru and Pd Catalysts
Biomass‐derived bio‐oil is a renewable liquid fuel that contains a high amount of oxygen with a low calorific value. Hydrodeoxygenation (HDO), as one of the methods to increase the calorific value of bio‐oil, was conducted in an autoclave‐type reactor at 250 °C with an initial H 2 pressure of 20 bar for 4 h using Ru/C and Pd/C catalysts with a metal precursor loading of 1, 3, and 5 wt.%. The HDO reaction using Ru(5 %)/C had a higher degree of deoxygenation (47 %). A higher yield (78 wt.%) of the oil phase was produced after the reaction using Pd(3 %)/C. The HDO reaction using Ru(5 %)/C and Pd(3 %)/C catalysts could increase the calorific value of bio‐oil from 23.3 to 29.8 and 28.5 MJ/kg, respectively.
- Open Access
- 2 October 2021
- Published by Maad Rayan Publishing Company in Journal of Herbmed Pharmacology
- Vol. 10 (4) , 459-467
The cytotoxicity, anti-inflammation, anti-nociceptive and oral ulcer healing properties of coconut shell liquid smoke
Introduction: Coconut shell liquid smoke (CS-LS) from Cocos nucifera L. has been traditionally used by Indonesians as a natural preservative. Besides that, liquid smoke is also used as a medicine to treat various types of wounds. During the storage, liquid smoke resulting from pyrolysis is still questionable in relation to the oxidation process and changes in its properties and potentials. We observed the physical characteristics, components, toxicity, anti-inflammatory, anti-nociceptive properties, and effect in oral ulcer healing of CS-LS. Methods: Acidity was analyzed using a digital pH meter, density test was analyzed using a pycnometer, and the components were determined using gas chromatography-mass spectrometry (GC-MS). Eight concentrations of CS-LS (1%, 2%, 4%, 6%, 8%, 10%, 12%, and 14%) were tested on baby hamster kidney (BHK21) for the extract toxicity, carrageenan-induced rat paw edema for its anti-inflammatory properties, hot-plate test for its anti-nociceptive, and traumatized labial fornix incisive inferior for its oral ulcer healing. Results: The acidity of CS-LS was 2.296 and the density was 1.0102 g/mL. The major components analyzed were phenol (32.75%), 2-methoxy-phenol (17.45%), and furfural (13.09%). The CS-LS 100% and CS-LS 8% were the optimum concentrations for maintaining the BHK21 and increasing the number of fibroblasts in oral ulcer healing. The CS-LS 100% showed potent anti-nociceptive ability compared to other concentrations (P = 0.001), but not for the anti-inflammation properties. Conclusion: CS-LS is a promising natural herb for oral medicine, especially oral ulcer medicine.
- 2 October 2021
- Published by Maad Rayan Publishing Company in Journal of Herbmed Pharmacology
- Vol. 10 (4) , 459-467
Open AccessThe cytotoxicity, anti-inflammation, anti-nociceptive and oral ulcer healing properties of coconut shell liquid smoke
Introduction: Coconut shell liquid smoke (CS-LS) from Cocos nucifera L. has been traditionally used by Indonesians as a natural preservative. Besides that, liquid smoke is also used as a medicine to treat various types of wounds. During the storage, liquid smoke resulting from pyrolysis is still questionable in relation to the oxidation process and changes in its properties and potentials. We observed the physical characteristics, components, toxicity, anti-inflammatory, anti-nociceptive properties, and effect in oral ulcer healing of CS-LS. Methods: Acidity was analyzed using a digital pH meter, density test was analyzed using a pycnometer, and the components were determined using gas chromatography-mass spectrometry (GC-MS). Eight concentrations of CS-LS (1%, 2%, 4%, 6%, 8%, 10%, 12%, and 14%) were tested on baby hamster kidney (BHK21) for the extract toxicity, carrageenan-induced rat paw edema for its anti-inflammatory properties, hot-plate test for its anti-nociceptive, and traumatized labial fornix incisive inferior for its oral ulcer healing. Results: The acidity of CS-LS was 2.296 and the density was 1.0102 g/mL. The major components analyzed were phenol (32.75%), 2-methoxy-phenol (17.45%), and furfural (13.09%). The CS-LS 100% and CS-LS 8% were the optimum concentrations for maintaining the BHK21 and increasing the number of fibroblasts in oral ulcer healing. The CS-LS 100% showed potent anti-nociceptive ability compared to other concentrations (P = 0.001), but not for the anti-inflammation properties. Conclusion: CS-LS is a promising natural herb for oral medicine, especially oral ulcer medicine.
- 21 September 2021
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (12) , 10561-10574
Pyrolysis of cajuput (Melaleuca leucadendron) twigs and rice (Oryza sativa) husks to produce liquid smoke-containing fine chemicals for antibacterial agent application
Pyrolysis of cajuput (Melaleuca leucadendron) twigs and rice (Oryza sativa) husks to produce liquid smoke and antibacterial activities of the liquid smoke fractions were investigated. The liquid smoke was produced by pyrolysis at 500 °C for 8 h and contained fine chemicals, such as acetic acid, carbonyl, cyclic ketones, and phenolic compounds with pH 2.1–2.9. The liquid smoke was separated by vacuum evaporation under vacuum conditions at low temperatures (40 °C, 50 °C, and 60 °C) to recover three fractions. The composition of each fraction influenced its antibacterial activities. Antibacterial activities of the liquid smoke fractions were tested against Gram-positive bacteria (Listeria monocytogenes, Bacillus subtilis, and Staphylococcus aureus) and Gram-negative bacteria (Salmonella typhimurium, Pseudomonas aeruginosa, and Escherichia coli). Whole fractions of the liquid smoke inhibited the six pathogenic bacteria, with the inhibition zone larger or smaller than the positive control. Among the liquid smoke fractions, the liquid recovered at 60 °C for the cajuput twigs and rice husks demonstrated a stronger inhibitory effect on bacterial growth than the other fractions.
- 21 September 2021
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (12) , 10561-10574
Pyrolysis of cajuput (Melaleuca leucadendron) twigs and rice (Oryza sativa) husks to produce liquid smoke-containing fine chemicals for antibacterial agent application
Pyrolysis of cajuput (Melaleuca leucadendron) twigs and rice (Oryza sativa) husks to produce liquid smoke and antibacterial activities of the liquid smoke fractions were investigated. The liquid smoke was produced by pyrolysis at 500 °C for 8 h and contained fine chemicals, such as acetic acid, carbonyl, cyclic ketones, and phenolic compounds with pH 2.1–2.9. The liquid smoke was separated by vacuum evaporation under vacuum conditions at low temperatures (40 °C, 50 °C, and 60 °C) to recover three fractions. The composition of each fraction influenced its antibacterial activities. Antibacterial activities of the liquid smoke fractions were tested against Gram-positive bacteria (Listeria monocytogenes, Bacillus subtilis, and Staphylococcus aureus) and Gram-negative bacteria (Salmonella typhimurium, Pseudomonas aeruginosa, and Escherichia coli). Whole fractions of the liquid smoke inhibited the six pathogenic bacteria, with the inhibition zone larger or smaller than the positive control. Among the liquid smoke fractions, the liquid recovered at 60 °C for the cajuput twigs and rice husks demonstrated a stronger inhibitory effect on bacterial growth than the other fractions.
- Open Access
- 16 June 2021
- Published by Springer Nature in Research Square
Comparison of Used Locomotive Fuel Filters after Using B20 and B0 Fuels
The automotive and non-automotive sectors have followed the Indonesian government's policy regarding applying high concentration biodiesel use. Some issues arise from the effects of using a high biodiesel concentration on engine components, such as filter blocking or degradation. Therefore, various parties have challenged to improve both in terms of fuel quality and engine components. Meanwhile, testing of high concentration biodiesel fuel (blending ratio above 10 %) was still rarely published in the rail transport sector. Therefore, the rail test aimed to evaluate the effect of B20 fuel on locomotive engine components. The test was conducted during two periodic maintenance (6 months) using two trains with B20 and B0 fuels as a comparison. This study discusses the effect of B20 on fuel filters by performing tests on used filters for one periodic maintenance (3 months). The morphological analysis of deposits was conducted using a digital microscope, while TGA, GC-MS, FTIR, and elemental analysis were used to determine its components. The results showed that biodiesel filtration in the main filter was higher, and the subsequent filtration showed fewer deposits than that of pure diesel. Various types of fuel filter deposits have been identified, such as hydrocarbons and fatty acid methyl esters.
- 16 June 2021
- Published by Springer Nature in Research Square
Open AccessComparison of Used Locomotive Fuel Filters after Using B20 and B0 Fuels
The automotive and non-automotive sectors have followed the Indonesian government's policy regarding applying high concentration biodiesel use. Some issues arise from the effects of using a high biodiesel concentration on engine components, such as filter blocking or degradation. Therefore, various parties have challenged to improve both in terms of fuel quality and engine components. Meanwhile, testing of high concentration biodiesel fuel (blending ratio above 10 %) was still rarely published in the rail transport sector. Therefore, the rail test aimed to evaluate the effect of B20 fuel on locomotive engine components. The test was conducted during two periodic maintenance (6 months) using two trains with B20 and B0 fuels as a comparison. This study discusses the effect of B20 on fuel filters by performing tests on used filters for one periodic maintenance (3 months). The morphological analysis of deposits was conducted using a digital microscope, while TGA, GC-MS, FTIR, and elemental analysis were used to determine its components. The results showed that biodiesel filtration in the main filter was higher, and the subsequent filtration showed fewer deposits than that of pure diesel. Various types of fuel filter deposits have been identified, such as hydrocarbons and fatty acid methyl esters.