Metal (Pt)/ferroelectric (SrBi2Ta2O9)/insulator (La2O3)/semiconductor (Si), MFIS structures for nonvolatile memory applications
- 9 August 2021
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (6) , 063505
Abstract
Extended data retention is a cardinal impediment for ferroelectric memories and serves a pivotal role for nonvolatile memory applications. Here, nonvolatile Metal–Ferroelectric–Insulator–Semiconductor (MFIS) structures are fabricated by using thin films of Strontium Bismuth Tantalum Oxide (SrBi2Ta2O9) as ferroelectric and high-κ lanthanum oxide (La2O3) as a buffer insulator on p-Si substrates via RF magnetron sputtering. The grazing incidence x-ray diffraction analysis confirms the dominant (111) and (115) ferroelectric perovskite phases of SrBi2Ta2O9 thin films. Albeit, atomic force microscopy surface micrographs revealed highly smooth La2O3 and SBT (SrBi2Ta2O9) thin films with a surface roughness of ∼0.22 ± 0.04 nm and ∼1.05 ± 0.03 nm, respectively. Capacitance–voltage (C–V), capacitance–time (C–T), and current–voltage (I–V) characteristics of Pt/SrBi2Ta2O9/La2O3/Si, MFIS structures, exhibited a high memory window of ∼1.1 V at ±5 V sweep voltage, data retention measured until ∼104 s even on the extrapolation up to 10 years, and a low leakage current density of ∼12.8 μA/cm2 at −1 V and 300 K. Far from it, the probed conduction mechanism is studied for Pt/SrBi2Ta2O9/La2O3/Si MFIS device structures. The optimum nonvolatile memory characteristics are attributed to the high-quality SBT ferroelectric and the buffer layer La2O3/Si interface of the investigated MFIS structure and also assert from the control Pt/SBT/Pt and Pt/La2O3/Si results. Thus, the proposed Pt/SrBi2Ta2O9/La2O3/Si structure is a potential candidate for a gate stack of one-transistor (1T) type Ferroelectric Field-Effect Transistors nonvolatile memory applications.Keywords
Funding Information
- Indian Institute of Technology Mandi
This publication has 32 references indexed in Scilit:
- Fabrication and characterization of metal-ferroelectric-insulator-Si diodes and transistors with different HfSiON buffer layer thicknessJournal of Materials Research, 2008
- Structural and electrical properties of metal–ferroelectric–insulator–semiconductor structure of Al/SrBi2Ta2O9/HfO2/Si using HfO2as buffer layerJournal of Physics D: Applied Physics, 2008
- Physics of thin-film ferroelectric oxidesReviews of Modern Physics, 2005
- Self-Aligned-Gate Metal/Ferroelectric/Insulator/Semiconductor Field-Effect Transistors with Long Memory RetentionJapanese Journal of Applied Physics, 2005
- High dielectric constant oxidesThe European Physical Journal Applied Physics, 2004
- Enhancement of Ferroelectricity in Strained BaTiO 3 Thin FilmsScience, 2004
- Current Status of Ferroelectric Random-Access MemoryMRS Bulletin, 2004
- A Significant Improvement in Memory Retention of Metal-Ferroelectric-Insulator-Semiconductor Structure for One Transistor-Type Ferroelectric Memory by Rapid Thermal AnnealingJapanese Journal of Applied Physics, 2003
- Stack gate PZT/Al2O3 one transistor ferroelectric memoryIEEE Electron Device Letters, 2001
- Structure refinement of commensurately modulated bismuth strontium tantalate, Bi2SrTa2O9Acta crystallographica Section B, Structural science, crystal engineering and materials, 1992