Platinum group metal-free (PGM-free) integrated tandem junction photoelectrochemical (PEC) water splitting devices (Final Technical Report)
Authors:
- Eric GarfunkelEGEric Garfunkel
- National Renewable Energy Laboratory (Nrel)N(National Renewable Energy Laboratory (Nrel)
- Charles DismukesCDCharles Dismukes
Open Access
- 24 April 2023
- report
- Published by Office of Scientific and Technical Information (OSTI)
Abstract
This project involves using solar light, a photoabsorber, and a catalyst to split water and produce hydrogen. The Department of Energy (DOE) targets for integrated photoelectrochemical (PEC) cells emphasize cost (electrode cost < $200/m2), performance (> 15% solar to hydrogen (STH) efficiency), and stability (> 6 months electrode lifetime), but most approaches skew toward one specific metric. This project exploited interfacial integration of platinum group metal-free (PGM-free) catalysts on the high performance and high value tandem solar cells to attain or exceed the DOE benchmark STH energy conversion efficiency and durability. This was investigated in two thrusts by developing two PEC devices for direct comparison: the first is a high-performance monolithic device based on state-of-the-art GaInP2/GaAs tandem solar cells developed at National Renewable Energy Laboratory (NREL), and the second is a high-value device based on earth-abundant wide band gap photoabsorber materials including oxynitride and hybrid organic-inorganic perovskite (HOIP) coupled with commercial narrow band gap silicon (Si). Both these devices were paired with electrocatalysts developed for this purpose at Rutgers University by adapting them to thin films on the photoabsorbers. These catalysts are based on the hydrogen evolution reaction (HER) catalysts (Ni5P4), oxygen evolution reaction (OER) catalysts (LiCo2O4) previously developed atmore » Rutgers for high-efficiency electrolyzers. For using the high-performance tandem solar cell and Ni5P4 catalysts, we achieved a durability of > 200 h at a STH efficiency of > 10%. For using the high-value wide band gap single junction solar cells on n+Si, we achieved 0.73 mA/cm2 at 1.23V vs reversible hydrogen electrode (RHE) and -15.9 mA/cm2 at 0V vs RHE using the oxynitride- and HOIP-based photoelectrodes, respectively. After comparing their photocurrent densities, we down selected the HOIP photoabsorber to couple Si for fabrication of a tandem photocathode. However, due to the COVID-19 pandemic, both the laboratories at Rutgers and NREL were locked down for three months and reopened only partially in 2020. The HOIP/Si tandem photocathode using robust nickel phosphide thin film catalysts cannot be developed within the project period, which is expected to achieve a STH efficiency of > 20%. Also, the low-cost LiCo2O4 OER catalysts need to replace the benchmark IrO2 for evaluation. Finally, techonomic analysis of full high-performance and high-value integrated PEC devices needs to be carried out for comparison in terms of cost. « lessKeywords
Funding Information
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Office of Sustainable Transportation. Hydrogen Fuel Cell Technologies Office (HFTO)
- DOE (EE0008083)
This publication has 5 references indexed in Scilit:
- Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from WaterAdvanced Functional Materials, 2023
- Creating Functional Oxynitride–Silicon Interfaces and SrNbO2N Thin Films for Photoelectrochemical ApplicationsThe Journal of Physical Chemistry C, 2022
- Photoelectrochemical Applications of SrNbO2n Thin Films Synthesized Via a Two-Step Process at Reduced TemperaturesECS Meeting Abstracts, 2019
- Creating stable interfaces between reactive materials: titanium nitride protects photoabsorber–catalyst interface in water-splitting photocathodesJournal of Materials Chemistry A, 2019
- Titanium Nitride As a Conducting Interfacial Layer between Hydrogen Evolution Catalysts and Silicon Photocathodes for Stable Solar-to-Hydrogen Water Splitting DevicesECS Meeting Abstracts, 2018