EGEric Garfunkel

Eric Garfunkel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eric Garfunkel has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thin film TiO2/TiN bifunctional interface enables integration of Ni5P4 electro-catalyst with GaInP2/GaAs III-V tandem photoabsorber for stable solar-driven water splitting

    by Shinjae Hwang, Hengfei Gu, James L. Young, Myles A. Steiner, Anders Laursen, Ryan A. Crichton, Yao-Wen Yeh, Philip E. Batson, Leonard C. Feldman, Mengjun Li, et al.

    Hydrogen production by photoelectrochemical (PEC) water splitting has remained challenging for commercialization mainly due to the limited durability of integrated photoelectrodes owing to failure of the interfacial connection between the photoabsorber(s) and catalyst(s). Although multijunction III-V semiconductors have been popular choices as photoabsorbers in PEC devices and have yielded a high solar-to-hydrogen (STH) efficiency > 19% using platinum group metal (PGM) catalysts, they rapidly corrode in aqueous electrolytes. Here, a bifunctional interface comprised of a titanium dioxide (TiO2) corrosion barrier and titanium nitride diffusion barrier (TiN, 1nm thickness) was created to protect the interface between the GaInP2/GaAs III-V tandem photocathode and the PGM-free catalyst. This strategy enables use of elevated temperatures to crystallize and fuse together the Ni5P4 catalyst particles and the TiO2 without damaging the sensitive III-V photoasbsorber. The combination of ultrathin catalyst and protective bilayers (Ni5P4/TiO2/TiN) produces negligible optical loss. The resulting III-V tandem photocathode exhibits an initial STH efficiency in a range of 11.4 - 13.2% in sodium phosphate electrolyte at neutral pH 7. It operated continuously for over 200 h at a STH efficiency > 10%, exceeding the previous benchmarks. Fused TiO2/TiN bilayers expand the synthesis temperatures for surface modification of and catalyst integration on III-V multijunction semiconductors without compromising the device photocurrent densities. The Ni5P4 catalyst replaces costly PGM catalysts with comparable HER activity and operates at neutral pH in less corrosive electrolytes than either acid or alkaline electrolytes.

  • Open Access

    Trap passivation of 4H-SiC/SiO2 interfaces by nitrogen annealing

    by Suman Das, Hengfei Gu, Lu Wang, Ayayi Ahyi, Leonard C. Feldman, Eric Garfunkel, Marcelo A. Kuroda, Sarit Dhar

    We report an N2 based annealing treatment to passivate interface traps (Dit) in n- and p-type 4H-SiC. The process has the potential to replace the commonly used hazardous and expensive gas nitric oxide (NO). N2 postoxidation annealing reduces Dit in both the upper and lower halves of the 4H-SiC bandgap, with a greater impact at the valence band edge. N2 annealing at 1500 °C is observed to be more effective in passivating traps and positive fixed charges than NO annealing for p-type devices, whereas for n-type devices, the opposite is true. The breakdown voltages for these devices are found to be lower than that of NO annealed devices. X-ray photoelectron spectroscopy has been performed to estimate the nitrogen areal density at the interface. Dit is measured as a function of nitrogen areal densities in the near interfacial regions for the different processes. Theoretical analysis through density functional theory is consistent with the measured Dit profiles by showing the generation of additional states near the valence band edge due to increased nitrogen concentration. In addition to reporting the effect of N2 annealing on both n- and p-type 4H-SiC, this work correlates the nitrogen areal densities at the interface to the Dit and explains the difference in Dit characteristics with nitrogen areal density between n- and p-type interfaces.


  • Open Access

    Platinum group metal-free (PGM-free) integrated tandem junction photoelectrochemical (PEC) water splitting devices (Final Technical Report)

    by Eric Garfunkel, National Renewable Energy Laboratory (Nrel), Charles Dismukes

    This project involves using solar light, a photoabsorber, and a catalyst to split water and produce hydrogen. The Department of Energy (DOE) targets for integrated photoelectrochemical (PEC) cells emphasize cost (electrode cost < $200/m2), performance (> 15% solar to hydrogen (STH) efficiency), and stability (> 6 months electrode lifetime), but most approaches skew toward one specific metric. This project exploited interfacial integration of platinum group metal-free (PGM-free) catalysts on the high performance and high value tandem solar cells to attain or exceed the DOE benchmark STH energy conversion efficiency and durability. This was investigated in two thrusts by developing two PEC devices for direct comparison: the first is a high-performance monolithic device based on state-of-the-art GaInP2/GaAs tandem solar cells developed at National Renewable Energy Laboratory (NREL), and the second is a high-value device based on earth-abundant wide band gap photoabsorber materials including oxynitride and hybrid organic-inorganic perovskite (HOIP) coupled with commercial narrow band gap silicon (Si). Both these devices were paired with electrocatalysts developed for this purpose at Rutgers University by adapting them to thin films on the photoabsorbers. These catalysts are based on the hydrogen evolution reaction (HER) catalysts (Ni5P4), oxygen evolution reaction (OER) catalysts (LiCo2O4) previously developed atmore » Rutgers for high-efficiency electrolyzers. For using the high-performance tandem solar cell and Ni5P4 catalysts, we achieved a durability of > 200 h at a STH efficiency of > 10%. For using the high-value wide band gap single junction solar cells on n+Si, we achieved 0.73 mA/cm2 at 1.23V vs reversible hydrogen electrode (RHE) and -15.9 mA/cm2 at 0V vs RHE using the oxynitride- and HOIP-based photoelectrodes, respectively. After comparing their photocurrent densities, we down selected the HOIP photoabsorber to couple Si for fabrication of a tandem photocathode. However, due to the COVID-19 pandemic, both the laboratories at Rutgers and NREL were locked down for three months and reopened only partially in 2020. The HOIP/Si tandem photocathode using robust nickel phosphide thin film catalysts cannot be developed within the project period, which is expected to achieve a STH efficiency of > 20%. Also, the low-cost LiCo2O4 OER catalysts need to replace the benchmark IrO2 for evaluation. Finally, techonomic analysis of full high-performance and high-value integrated PEC devices needs to be carried out for comparison in terms of cost. « less

  • Open Access

    Humble planar defects in SiGe nanopillars

    by Hongbin Yang, Shang Ren, Sobhit Singh, Emily M. Turner, Kevin S. Jones, Philip E. Batson, David Vanderbilt, Eric Garfunkel

    We report a {001} planar defect found in SiGe nanopillars. The defect structure, determined by atomic-resolution electron microscopy, matches the Humble defect model proposed for diamond. We also investigate several possible variants of the Humble structure using first-principles calculations and find that the one lowest in energy is in agreement with the scanning transmission electron microscope images. The pillar composition has been analyzed with electron energy loss spectroscopy, which hints at how the defect is formed. Our results show that the structure and formation process of defects in nanostructured group IV semiconductors can be different from their bulk counterparts.


  • Highly efficient and durable III–V semiconductor-catalyst photocathodesviaa transparent protection layer

    by Shinjae Hwang, James L. Young, Rachel Mow, Anders B. Laursen, Mengjun Li, Hongbin Yang, Philip E. Batson, Martha Greenblatt, Myles A. Steiner, Daniel Friedman, et al.

    Integration of crystalline Ni5P4–TiN catalyst-protection layer on buried junction n+p-GaInP2.


  • Creating stable interfaces between reactive materials: titanium nitride protects photoabsorber–catalyst interface in water-splitting photocathodes

    by Shinjae Hwang, Spencer H. Porter, Anders B. Laursen, Hongbin Yang, Mengjun Li, Viacheslav Manichev, Karin U. D. Calvinho, Voshadhi Amarasinghe, Martha Greenblatt, Eric Garfunkel, et al.

    Thin-films of cubic-NiP2 and TiN layers are applied on Si for efficient and stable photocathodes.


  • Selective CO 2 reduction to C 3 and C 4 oxyhydrocarbons on nickel phosphides at overpotentials as low as 10 mV

    by Karin U. D. Calvinho, Anders B. Laursen, Kyra M. K. Yap, Timothy A. Goetjen, Shinjae Hwang, Nagarajan Murali, Bryan Mejia-Sosa, Alexander Lubarski, Krishani M. Teeluck, Eugene S. Hall, et al.

    Bioinspired nickel phosphide electrocatalysts achieve breakthrough efficiency and selectivity for C 3 and C 4 products.


  • Optimizing “Artificial Leaf” Photoanode-Photocathode-Catalyst Interface Systems for Solar Water Splitting

    by Spencer H Porter, Shinjae Hwang, Voshadhi Amarasinghe, Elaheh Taghaddos, Viacheslav Manichev, Mengjun Li, Graeme Gardner, Ahmad Safari, Eric Garfunkel, Martha Greenblatt, et al.

    A novel dual photoabsorber interface: perovskite oxynitride (SrNbO2N) deposited on silicon (100), and a H2ER catalyst photoabsorber interface: (Ni5P4 or Ni2P)-silicon, are fabricated. Titanium nitride (TiN) is introduced as a blocking layer between Sr2Nb2O7 and Si (100), which produces clean interfaces. During the high temperature ammonolysis step needed to convert Sr2Nb2O7 to SrNbO2N, it is effective at blocking Nb and Si (but not Sr) migration. A half-cell cathode with the H2ER catalyst (Ni5P4 or Ni2P)-photoabsorber interface produces H2 approaching best-in-class overpotentials for films (Ni5P4: 211mV vs RHE at 10mV/cm2) with a 50mV/decade Tafel slope. Films are atomically smooth, except for surface phosphate that is removed during electrolysis.


  • ALD growth of Al2O3 on GaAs: Oxide reduction, interface structure and CV performance

    by H. D. Lee, T. Feng, L. Yu, D. Mastrogiovanni, A. Wan, E. Garfunkel, T. Gustafsson

    We have studied the effect of the trimethylaluminum (TMA) precursor on the reduction of surface “native” oxides from GaAs substrates using medium energy ion scattering spectroscopy (MEIS), X‐ray photoelectron spectroscopy (XPS) and electrical measurements. Our data show that after one single TMA pulse a substantial part of the native oxide is reduced and an oxygen‐rich aluminum oxide layer is formed. Al2O3 films grown with the normal atomic layer deposition cycles of TMA and water show that the growth rate of the Al oxide during this initial reduction of the native oxides is faster than the rate once this reduction is completed. Furthermore, the results of C‐V measurements of Al2O3/GaAs grown under the same conditions along with post deposition annealing indicate a good quality interface.


  • Advances in high & kappa gate dielectrics for Si and III-V semiconductors

    by J. Kwo, M. Hong, B. Busch, D.A. Muller, Y.J. Chabal, A.R. Kortan, J.P. Mannaerts, B. Yang, P. Ye, H. Gossmann, et al.