Fatigue tests of notched specimens made from butt joints at steel
- 1 June 2016
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 39 (12) , 1526-1541
Abstract
The weld toe as well as the weld root of joints acts as a geometrical notch, which decreases the fatigue strength of welded components. Local approaches used for fatigue assessment account for the local stress concentration when referring to the notch stress as a fatigue parameter. This applies also to the approaches based on the notch stress intensity factor like, for example, the averaged strain energy density, neglecting the actual notch radius and considering a sharp notch as a simplification. A uniform S‐N curve valid for different types of welded joints and failure locations was derived from re‐analyses of fatigue test results as documented in literature. The fatigue tests described in this paper aimed at validating that energy‐based S‐N curve by dedicated tests on artificially notched specimens. At first, four parameters were investigated in order to estimate their influence on the fatigue strength and to select appropriate notch geometries for the final step of the test campaign. The advantages of these tests are that both the exact notch geometry and the local stress range at the notch, including misalignment effects, were identified and considered in experimental data analysis. This paper presents the results of the rather comprehensive testing activities and comparisons with the design‐S‐N curve mentioned, yielding unexpected fatigue behaviour. This can be explained by the short crack propagation life.Keywords
Funding Information
- Alexander von Humboldt Stiftung
This publication has 21 references indexed in Scilit:
- The peak stress method combined with 3D finite element models for fatigue assessment of toe and root cracking in steel welded joints subjected to axial or bending loadingFatigue & Fracture of Engineering Materials & Structures, 2014
- Generalised Neuber concept of fictitious notch roundingInternational Journal of Fatigue, 2013
- Fatigue of Structures and Materials2009
- Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V‐notched componentsFatigue & Fracture of Engineering Materials & Structures, 2007
- Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy valuesInternational Journal of Fracture, 2005
- A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notchesInternational Journal of Fracture, 2001
- A NOTCH INTENSITY FACTOR APPROACH TO THE STRESS ANALYSIS OF WELDSFatigue & Fracture of Engineering Materials & Structures, 1998
- EARLY DEVELOPMENT OF FATIGUE CRACKING AT MANUAL FILLET WELDSFatigue & Fracture of Engineering Materials & Structures, 1996
- A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notchesInternational Journal of Fracture, 1996
- The use of notch stress intensity factor as a fatigue crack initiation parameterEngineering Fracture Mechanics, 1995