Wolfgang Fricke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wolfgang Fricke has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
C. Fischer
Institute of Ship Structural Design and Analysis, Hamburg University of Technology, Hamburg, Germany
2 shared publicationsA. Nevierov
Fincantieri – Cantieri Navali Italiani SpA, Trieste, Italy
1 shared publicationA. Sumpf
SLV Mecklenburg-Vorpommern GmbH, Rostock, Germany
1 shared publication- Berend Bohlmann
Kiel University of Applied Sciences, Kiel, Germany
1 shared publication C Fischer
1 shared publicationC Rizzo
1 shared publication
Latest Publications
- 16 December 2024
- Published by Springer Nature in Welding in the World
- Vol. 69 (3) , 619-632
Results of the JaCo project: fatigue strength of robot-welded tubular joints for offshore wind energy converters
- 16 December 2024
- Published by Springer Nature in Welding in the World
- Vol. 69 (3) , 619-632
Results of the JaCo project: fatigue strength of robot-welded tubular joints for offshore wind energy converters
- 10 December 2016
- Published by Elsevier in Marine Structures
- Vol. 52, 67-68
Fatigue Design of Marine Structures, Inge Lotsberg (Ed.), Cambridge University Press (2016)
- 10 December 2016
- Published by Elsevier in Marine Structures
- Vol. 52, 67-68
Fatigue Design of Marine Structures, Inge Lotsberg (Ed.), Cambridge University Press (2016)
- 1 November 2016
- Published by Elsevier in International Journal of Fatigue
- Vol. 92, 488-498
Effect of the stress distribution in simple welded specimens and complex components on the crack propagation life
- 1 November 2016
- Published by Elsevier in International Journal of Fatigue
- Vol. 92, 488-498
Effect of the stress distribution in simple welded specimens and complex components on the crack propagation life
- 1 June 2016
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 39 (12) , 1526-1541
Fatigue tests of notched specimens made from butt joints at steel
The weld toe as well as the weld root of joints acts as a geometrical notch, which decreases the fatigue strength of welded components. Local approaches used for fatigue assessment account for the local stress concentration when referring to the notch stress as a fatigue parameter. This applies also to the approaches based on the notch stress intensity factor like, for example, the averaged strain energy density, neglecting the actual notch radius and considering a sharp notch as a simplification. A uniform S‐N curve valid for different types of welded joints and failure locations was derived from re‐analyses of fatigue test results as documented in literature. The fatigue tests described in this paper aimed at validating that energy‐based S‐N curve by dedicated tests on artificially notched specimens. At first, four parameters were investigated in order to estimate their influence on the fatigue strength and to select appropriate notch geometries for the final step of the test campaign. The advantages of these tests are that both the exact notch geometry and the local stress range at the notch, including misalignment effects, were identified and considered in experimental data analysis. This paper presents the results of the rather comprehensive testing activities and comparisons with the design‐S‐N curve mentioned, yielding unexpected fatigue behaviour. This can be explained by the short crack propagation life.
- 1 June 2016
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 39 (12) , 1526-1541
Fatigue tests of notched specimens made from butt joints at steel
The weld toe as well as the weld root of joints acts as a geometrical notch, which decreases the fatigue strength of welded components. Local approaches used for fatigue assessment account for the local stress concentration when referring to the notch stress as a fatigue parameter. This applies also to the approaches based on the notch stress intensity factor like, for example, the averaged strain energy density, neglecting the actual notch radius and considering a sharp notch as a simplification. A uniform S‐N curve valid for different types of welded joints and failure locations was derived from re‐analyses of fatigue test results as documented in literature. The fatigue tests described in this paper aimed at validating that energy‐based S‐N curve by dedicated tests on artificially notched specimens. At first, four parameters were investigated in order to estimate their influence on the fatigue strength and to select appropriate notch geometries for the final step of the test campaign. The advantages of these tests are that both the exact notch geometry and the local stress range at the notch, including misalignment effects, were identified and considered in experimental data analysis. This paper presents the results of the rather comprehensive testing activities and comparisons with the design‐S‐N curve mentioned, yielding unexpected fatigue behaviour. This can be explained by the short crack propagation life.
- 16 March 2016
- Published by Springer Nature in Welding in the World
- Vol. 60 (3) , 593-604
Fatigue strength of laser-stake welded T-joints subjected to combined axial and shear loads
- 16 March 2016
- Published by Springer Nature in Welding in the World
- Vol. 60 (3) , 593-604
Fatigue strength of laser-stake welded T-joints subjected to combined axial and shear loads
- 3 September 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 229 (7) , 1224-1239
Recent developments and future challenges in fatigue strength assessment of welded joints
Fatigue is an important design criterion for welded structures subjected to cyclic loading. Several approaches for fatigue strength assessment have been developed which are either based on Woehler S–N curves and damage accumulation rule or on crack propagation law. The paper briefly reviews the different approaches, highlighting their advantages and limitations. In this connection, the problematic distinction between crack initiation and propagation phases is discussed, followed by considerations about some parameters which have large influence on the fatigue behaviour of welded joints but are considered differently in the approaches, such as plate thickness and stress gradient effects, multiaxial stress states, welding-induced distortions and residual stresses. Finally, ways of improving the fatigue behaviour of welded structures, either during design by reducing the stress concentration or during fabrication by improved quality or post-weld treatment or else by special material characteristics, are addressed. Emphasis will be placed on recent developments and challenges for the future from a personal perspective of the author.
- 3 September 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 229 (7) , 1224-1239
Recent developments and future challenges in fatigue strength assessment of welded joints
Fatigue is an important design criterion for welded structures subjected to cyclic loading. Several approaches for fatigue strength assessment have been developed which are either based on Woehler S–N curves and damage accumulation rule or on crack propagation law. The paper briefly reviews the different approaches, highlighting their advantages and limitations. In this connection, the problematic distinction between crack initiation and propagation phases is discussed, followed by considerations about some parameters which have large influence on the fatigue behaviour of welded joints but are considered differently in the approaches, such as plate thickness and stress gradient effects, multiaxial stress states, welding-induced distortions and residual stresses. Finally, ways of improving the fatigue behaviour of welded structures, either during design by reducing the stress concentration or during fabrication by improved quality or post-weld treatment or else by special material characteristics, are addressed. Emphasis will be placed on recent developments and challenges for the future from a personal perspective of the author.
- 23 January 2014
- Published by Springer Nature in Welding in the World
- Vol. 58 (2) , 261-268
Effect of whipping stresses on the fatigue damage of ship structures
- 23 January 2014
- Published by Springer Nature in Welding in the World
- Vol. 58 (2) , 261-268
Effect of whipping stresses on the fatigue damage of ship structures
- 3 December 2013
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 10 (1) , 39-44
Fatigue strength of laser-welded thin-plate ship structures based on nominal and structural hot-spot stress approach
To improve the energy efficiency, the demand for new light-weight solutions has been increased significantly in the last decades. The weight reduction of the current ship structures is possible using thinner plates, that is, plate thickness between 3 and 4 mm. However, at present this is, in normal cases, not possible due to the 5 mm minimum plate thickness requirement given by classification societies. The present paper investigates the fatigue strength of thin-plated ship structures. In the European research project BESST – ‘Breakthrough in European Ship and Shipbuilding Technologies’ – the extensive fatigue test programme was carried out for butt- and fillet-welded specimens, which were manufactured by the arc, laser and laser-hybrid welding methods. The test programme also covered the different production quality and thus a large variation of misalignments was included. Fatigue test results were analysed using the nominal as well as the structural stress approach, where the actual geometry of the specimens was taken into account. The results show that the present design S–N curve with slope value of 3 is applicable to thin plates, but it is slightly non-conservative. The fatigue test results for thin plates show better agreement with the slope value of 5. For thin plates and slender ship structures, the secondary bending stress due to angular misalignment plays an important part and changes in a non-linear way with the applied tension load. Therefore, it is important to consider the plate straightening effect in structural stress analysis.
- 3 December 2013
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 10 (1) , 39-44
Fatigue strength of laser-welded thin-plate ship structures based on nominal and structural hot-spot stress approach
To improve the energy efficiency, the demand for new light-weight solutions has been increased significantly in the last decades. The weight reduction of the current ship structures is possible using thinner plates, that is, plate thickness between 3 and 4 mm. However, at present this is, in normal cases, not possible due to the 5 mm minimum plate thickness requirement given by classification societies. The present paper investigates the fatigue strength of thin-plated ship structures. In the European research project BESST – ‘Breakthrough in European Ship and Shipbuilding Technologies’ – the extensive fatigue test programme was carried out for butt- and fillet-welded specimens, which were manufactured by the arc, laser and laser-hybrid welding methods. The test programme also covered the different production quality and thus a large variation of misalignments was included. Fatigue test results were analysed using the nominal as well as the structural stress approach, where the actual geometry of the specimens was taken into account. The results show that the present design S–N curve with slope value of 3 is applicable to thin plates, but it is slightly non-conservative. The fatigue test results for thin plates show better agreement with the slope value of 5. For thin plates and slender ship structures, the secondary bending stress due to angular misalignment plays an important part and changes in a non-linear way with the applied tension load. Therefore, it is important to consider the plate straightening effect in structural stress analysis.
- 23 August 2013
- Published by Springer Nature in Welding in the World
- Vol. 57 (6) , 753-791
IIW guideline for the assessment of weld root fatigue
- 23 August 2013
- Published by Springer Nature in Welding in the World
- Vol. 57 (6) , 753-791
IIW guideline for the assessment of weld root fatigue
- 20 September 2011
- Published by Taylor & Francis
- p. 411-418
N-SIF based fatigue assessment of hopper knuckle details
- 20 September 2011
- Published by Taylor & Francis
- p. 411-418
N-SIF based fatigue assessment of hopper knuckle details