Flexible Beamforming for Direct Radiating Arrays in Satellite Communications
Authors:
- Juan Andrés Vásquez-PeralvoJVJuan Andrés Vásquez-Peralvo
- Jorge QuerolJQJorge Querol
- Flor OrtízFlor Ortíz
- Jorge Luis González RiosJRJorge Luis González Rios
- Eva LagunasEva Lagunas
- Victor Monzon BaezaVictor Monzon Baeza
- Luis Manuel Garcés-SocorrásLuis Manuel Garcés-Socorrás
- Juan Carlos Merlano DuncanJDJuan Carlos Merlano Duncan
- Symeon ChatzinotasSCSymeon Chatzinotas
Open Access
- 31 July 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 79684-79696
Abstract
Onboard satellite communication systems generate and manage coverage beams over the Earth. Depending on data traffic requirements, the number of beams, side lobe levels, nulls, and EIRP, their beamwidth must be efficiently generated and managed. Therefore, this paper describes an approach for beam pattern synthesis applied to geostationary satellite communication systems. The beam pattern synthesis can generate beams with a beamwidth variation from 0.45° to 1.5°, which can be controlled independently for the two principal cuts. In addition, other requirements have been considered, e.g., latitude, and longitude, required EIRP, minimum and maximum side love levels for the two principal cuts, and nulling direction. The output of the synthesizer is a weight matrix with beamforming coefficients of the required beam. The direct radiating array in this contribution utilizes an open-ended waveguide antenna as unit cell elements with a period of 0.875λ 0 designed to work in left-hand circular polarization in the frequency band from 17.7 to 20.1 GHz. Since this design is intended for high-data rates applications, the minimum beamwidth requirements are very narrow. Therefore, 36 × 36 sub-arrays of 4 × 4 unit cells with a period of 3.5λ are considered to accomplish the beamwidth requirements while maintaining reduced computational and time resources for the weight matrix calculation compared to the conventional counterpart of 144×144 unit cells. The results show that the algorithm, which uses the surrogate optimizer, can compute the weight matrix and synthesize the beam with a slight deviation from the input data.Keywords
Funding Information
- European Space Agency
- “Satellite Signal Processing Techniques using a Commercial Off-The-Shelf AI Chipset (SPAICE)” (4000134522/21/NL/FGL)
This publication has 37 references indexed in Scilit:
- ON THE SCANNING PROPERTIES OF IMAGING ANTENNAS BASED ON DUAL CONFOCAL PARABOLOIDAL REFLECTORSProgress In Electromagnetics Research M, 2014
- DIRECT RADIATING ARRAYS FOR SATELLITE COMMUNICATIONS VIA APERIODIC TILINGSProgress In Electromagnetics Research, 2009
- The development of inflatable array antennasIEEE Antennas and Propagation Magazine, 2001
- A design of novel grooved circular waveguide polarizersIEEE Transactions on Microwave Theory and Techniques, 2000
- Isophoric arrays-massively thinned phased arrays with well-controlled sidelobesIEEE Transactions on Antennas and Propagation, 1999
- Sidelobe reduction in array-pattern synthesis using genetic algorithmIEEE Transactions on Antennas and Propagation, 1997
- Optimising the synthesis of shaped beam antenna patternsIEE Proceedings H Microwaves, Antennas and Propagation, 1985
- A generalized hamming windowIEEE Transactions on Acoustics, Speech, and Signal Processing, 1978
- The measurement of power spectra from the point of view of communications engineering — Part IBell System Technical Journal, 1958
- A Mathematical Theory of Linear ArraysBell System Technical Journal, 1943