Mechanical Properties of In-Situ Synthesis of Ti-Ti3Al Metal Composite Prepared by Selective Laser Melting
Open Access
Abstract
Titanium composite strengthened by Ti3Al precipitations is considered to be one of the excellent materials that is widely used in engineering. In this work, we prepared a kind of Ti-Ti3Al metallic composite by in-situ synthesis technology during the SLM (selective laser melting) process, and analyzed its microstructure, wear resistance, microhardness, and compression properties. The results showed that the Ti-Ti3Al composite, prepared by in-situ synthesis technology based on SLM, had more homogeneous Ti3Al-enhanced phase dispersion strengthening structure. The grain size of the workpiece was about 1 μm, and that of the Ti3Al particle was about 200 nm. Granular Ti3Al was precipitated after the aluminum-containing workpiece formed, with a relatively uniform distribution. Regarding the mechanical properties, the hardness (539 HV) and the wear resistance were significantly improved when compared with the Cp-Ti workpiece. The compressive strength of the workpiece increased from 886.32 MPa to 1568 MPa, and the tensile strength of the workpiece increased from 531 MPa to 567 MPa after adding aluminum. In the future, the combination of in-situ synthesis technology and SLM technology can be used to flexibly adjust the properties of Ti-based materials.Keywords
Funding Information
- the Advanced Research Project of Army Equipment Development (301020803)
- the Young Scientists Fund of the National Natural Science Foundation of China (51605473)
- the Jiangsu Provincial Research Foundation for Basic Research (BK 20161476)
- the Science and Technology Support Program of Jiangsu (BE 2016010-3)
This publication has 22 references indexed in Scilit:
- Laser additive manufacturing of Zn-2Al part for bone repair: Formability, microstructure and propertiesJournal of Alloys and Compounds, 2019
- Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser meltingActa Materialia, 2016
- The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatmentMaterials Science and Engineering: A, 2016
- Perspectives on Titanium Science and TechnologyActa Materialia, 2013
- Effects of titanium surface topography on bone integration: a systematic reviewClinical Oral Implants Research, 2009
- Preparation of TiN–Ti5Si3 in-situ composites by Selective Laser MeltingMaterials Letters, 2009
- Effects of nano-sized α2 (Ti3Al) particles on quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy with bimodal microstructureJournal of Materials Science, 2005
- Constitutive properties of hard-alpha titaniumMetallurgical and Materials Transactions A, 2000
- Production of copper-matrix composites by in situ processingJournal of Materials Science, 1995
- Microstructure-property relationships of in situ reacted TiC/AlCu metal matrix compositesMaterials Science and Engineering: A, 1991