Improving the performance of an electrowetting lenticular lens array by using a thin polycarbonate chamber
Authors:
Open Access
- 16 December 2016
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 24 (26) , 29972-29983
Abstract
In this paper, we used a thin polycarbonate (PC) chamber to improve the performance of an electrowetting lenticular lens array. The polycarbonate chamber changed the radius of curvature (ROC) of the oil acting as a lens, which increased the dioptric power of the liquid lens to 1666.7D. The increase in dioptric power required a reduction in the distance between the optical center of the lens and the display pixels under the chamber, which was accomplished by reducing the thickness of the chamber. The optimal thickness of the chamber was determined to be 0.5mm. Using this thin PC chamber, transmittance and viewing angle were measured and compared with an electrowetting lenticular lens with a conventional 1mm poly methyl methacrylate (PMMA) chamber was done. Crosstalk which degrades clear 3D images, is an inevitable factor in lenticular lens type multi-view systems. With the 0.5mm PC chamber, the viewing zone was expanded and the ratio of the crosstalk area was reduced, which resulted in a clear 3D image. The new method of depositing the electrode layer also ensured the uniform operation of the liquid lens array.Keywords
Funding Information
- Ministry of Science, ICT and Future Planning (MSIP) (GK16D0210)
This publication has 17 references indexed in Scilit:
- Electrowetting Lenticular Lens for a Multi-View Autostereoscopic 3D DisplayIEEE Photonics Technology Letters, 2016
- High resolution parallax barrier 3D display based on a sub-display-panel with transparent slitsOptik, 2016
- Liquid-filled tunable lenticular lensJournal of Micromechanics and Microengineering, 2015
- Emulating Autostereoscopic Lenticular DesignsJournal of Display Technology, 2012
- Super multi-view display with a lower resolution flat-panel displayOptics Express, 2011
- Autostereoscopic display based on two-layer lenticular lensesOptics Letters, 2010
- 30.1: Fast Switching Fresnel Liquid Crystal Lens for Autostereoscopic 2D/3D DisplaySID Symposium Digest of Technical Papers, 2010
- Advances in the Dynallax Solid-State Dynamic Parallax Barrier Autostereoscopic Visualization Display SystemIEEE Transactions on Visualization and Computer Graphics, 2008
- Variable focal lens controlled by an external voltage: An application of electrowettingThe European Physical Journal E, 2000
- Liquid-Crystal Lens-Cells with Variable Focal LengthJapanese Journal of Applied Physics, 1979