Preliminary accident analysis of the loss of vacuum in vacuum vessel for the European DEMO HCPB blanket concept
Authors:
Open Access
- 12 April 2024
- journal article
- research article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (5) , 056038
Abstract
Design basis accidents are investigated continuously for the European DEMO reactor accompanying its development. One selected postulated initial event (PIE) is a loss of vacuum (LOVA) in vacuum vessel (VV) with large ingress of air induced by rupture in a VV penetration. It has been investigated for the helium cooled pebble bed (HCPB) blanket concept according to the DEMO baseline 2017. The associated primary heat transfer system (PHTS) and the related systems in the tokamak building, from the VV to the PHTS vault and galleries, are considered for the investigation. The LOVA is postulated to occur at a port seal of the electron cyclotron equatorial port plug on the side of the closure plate with (i) a small leak of 1.0 × 10−3 m2, or (ii) a large break size of 1.0 × 10−2 m2. Air ingress from one port cell into the VV leads to the VV pressurization and the fusion power termination followed by an unmitigated plasma disruption. A loss of off-site power for 32 h is assumed to coincide with the disruption. An in-vessel loss of coolant accident (LOCA) is considered as a consequence if the affected first wall (FW) reaches the defined temperature of 1000 °C. The radioactive inventories in the VV (tritium, W-dust) can mobilize towards the VVPSS, the affected systems in the building and the environment due to pressurization, venting and leak conditions. MELCOR 1.8.6 for fusion is applied for this deterministic safety analysis. The resulting releases of radioactivity to the environment are then provided for dose calculation using the computer systems UFOTRI and COSYMA. Outcomes of this LOVA analysis are critically discussed: the transient evolutions of different cases are compared; hydrogen production is detected in case of aggravating FW failure; the source terms (tritium, W-dust) are transported to the connected systems; and the dose results from the environmental releases are provided.Keywords
Funding Information
- Euratom Research and Training Programme (101052200)
This publication has 23 references indexed in Scilit:
- DEMO – The main achievements of the Pre – Concept phase of the safety and environmental work package and the development of the GSSRFusion Engineering and Design, 2022
- Materials for in-vessel componentsFusion Engineering and Design, 2022
- The EU DEMO staged design approach in the Pre-Concept Design PhaseFusion Engineering and Design, 2021
- Pre-conceptual design of EU-DEMO divertor primary heat transfer systemsFusion Engineering and Design, 2021
- Comparative activation analyses for the HCPB breeding blanket in DEMOFusion Engineering and Design, 2021
- Eurofusion-DEMO Divertor - Cassette Design and IntegrationFusion Engineering and Design, 2020
- BB LOCA analysis for the reference design of the EU DEMO HCPB blanket conceptFusion Engineering and Design, 2018
- Preliminary safety analysis of LOCAs in one EU DEMO HCPB blanket moduleFusion Engineering and Design, 2017
- Identification of accident sequences for the DEMO plantFusion Engineering and Design, 2017
- A recent version of MELCOR for fusion safety applicationsFusion Engineering and Design, 2010