Xue Zhou Jin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Xue Zhou Jin has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
- Bradut-Eugen Ghidersa
Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
13 shared publications - Robert Stieglitz
Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
8 shared publications - Bruno Gonfiotti
Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
4 shared publications Tonio Pinna
ENEA UTFUS-TECN, Via Enrico Fermi, 45, 00044, Frascati, Roma, Italy
4 shared publications- Mihaela Ionescu-Bujor
Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
3 shared publications Neill Taylor
Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, Oxfordshire OX14 3DB, UK
3 shared publications
Latest Publications
- Open Access
- 12 April 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (5) , 056038
Preliminary accident analysis of the loss of vacuum in vacuum vessel for the European DEMO HCPB blanket concept
Design basis accidents are investigated continuously for the European DEMO reactor accompanying its development. One selected postulated initial event (PIE) is a loss of vacuum (LOVA) in vacuum vessel (VV) with large ingress of air induced by rupture in a VV penetration. It has been investigated for the helium cooled pebble bed (HCPB) blanket concept according to the DEMO baseline 2017. The associated primary heat transfer system (PHTS) and the related systems in the tokamak building, from the VV to the PHTS vault and galleries, are considered for the investigation. The LOVA is postulated to occur at a port seal of the electron cyclotron equatorial port plug on the side of the closure plate with (i) a small leak of 1.0 × 10−3 m2, or (ii) a large break size of 1.0 × 10−2 m2. Air ingress from one port cell into the VV leads to the VV pressurization and the fusion power termination followed by an unmitigated plasma disruption. A loss of off-site power for 32 h is assumed to coincide with the disruption. An in-vessel loss of coolant accident (LOCA) is considered as a consequence if the affected first wall (FW) reaches the defined temperature of 1000 °C. The radioactive inventories in the VV (tritium, W-dust) can mobilize towards the VVPSS, the affected systems in the building and the environment due to pressurization, venting and leak conditions. MELCOR 1.8.6 for fusion is applied for this deterministic safety analysis. The resulting releases of radioactivity to the environment are then provided for dose calculation using the computer systems UFOTRI and COSYMA. Outcomes of this LOVA analysis are critically discussed: the transient evolutions of different cases are compared; hydrogen production is detected in case of aggravating FW failure; the source terms (tritium, W-dust) are transported to the connected systems; and the dose results from the environmental releases are provided.
- 12 April 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (5) , 056038
Open AccessPreliminary accident analysis of the loss of vacuum in vacuum vessel for the European DEMO HCPB blanket concept
Design basis accidents are investigated continuously for the European DEMO reactor accompanying its development. One selected postulated initial event (PIE) is a loss of vacuum (LOVA) in vacuum vessel (VV) with large ingress of air induced by rupture in a VV penetration. It has been investigated for the helium cooled pebble bed (HCPB) blanket concept according to the DEMO baseline 2017. The associated primary heat transfer system (PHTS) and the related systems in the tokamak building, from the VV to the PHTS vault and galleries, are considered for the investigation. The LOVA is postulated to occur at a port seal of the electron cyclotron equatorial port plug on the side of the closure plate with (i) a small leak of 1.0 × 10−3 m2, or (ii) a large break size of 1.0 × 10−2 m2. Air ingress from one port cell into the VV leads to the VV pressurization and the fusion power termination followed by an unmitigated plasma disruption. A loss of off-site power for 32 h is assumed to coincide with the disruption. An in-vessel loss of coolant accident (LOCA) is considered as a consequence if the affected first wall (FW) reaches the defined temperature of 1000 °C. The radioactive inventories in the VV (tritium, W-dust) can mobilize towards the VVPSS, the affected systems in the building and the environment due to pressurization, venting and leak conditions. MELCOR 1.8.6 for fusion is applied for this deterministic safety analysis. The resulting releases of radioactivity to the environment are then provided for dose calculation using the computer systems UFOTRI and COSYMA. Outcomes of this LOVA analysis are critically discussed: the transient evolutions of different cases are compared; hydrogen production is detected in case of aggravating FW failure; the source terms (tritium, W-dust) are transported to the connected systems; and the dose results from the environmental releases are provided.
- Open Access
- 29 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 12 (1) , 311
Best-Estimate for System Codes (BeSYC): A New Software to Perform Best-Estimate Plus Uncertainty Analyses with Thermal-Hydraulic and Safety System Codes for Both Fusion and Fission Scenarios
The development and the validation of old and new software in relevant DEMO reactor conditions have been exploited in the latest years within the EUROfusion Consortium. The aim was to use—if possible—the software already validated for fission reactors and to fill the gaps with new ad-hoc software. As contribution to this effort, the Karlsruhe Institute of Technology (KIT) developed and tested a novel software to apply the Best-Estimate Model Calibration and Prediction through Experimental Data Assimilation methodology to the system codes RELAP5-3D, MELCOR 1.8.6, and MELCOR 2.2. This software is called Best-estimate for SYstem Codes (BeSYC), and it is developed as a MATLAB App. The application is in charge of applying the mathematical framework of the methodology, writing and executing the code runs required by the methodology, and printing the obtained results. The main goal of BeSYC is to wrap up the methodology in a software suitable to be used by any user through a simple graphical user interface. Albeit developed in the fusion research context, BeSYC can be applied to any reactor/scenario type supported by the specific system code. The goals of BeSYC, the mathematical framework, the main characteristics, and the performed verification and validation activities are described in this paper.
- 29 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 12 (1) , 311
Open AccessBest-Estimate for System Codes (BeSYC): A New Software to Perform Best-Estimate Plus Uncertainty Analyses with Thermal-Hydraulic and Safety System Codes for Both Fusion and Fission Scenarios
The development and the validation of old and new software in relevant DEMO reactor conditions have been exploited in the latest years within the EUROfusion Consortium. The aim was to use—if possible—the software already validated for fission reactors and to fill the gaps with new ad-hoc software. As contribution to this effort, the Karlsruhe Institute of Technology (KIT) developed and tested a novel software to apply the Best-Estimate Model Calibration and Prediction through Experimental Data Assimilation methodology to the system codes RELAP5-3D, MELCOR 1.8.6, and MELCOR 2.2. This software is called Best-estimate for SYstem Codes (BeSYC), and it is developed as a MATLAB App. The application is in charge of applying the mathematical framework of the methodology, writing and executing the code runs required by the methodology, and printing the obtained results. The main goal of BeSYC is to wrap up the methodology in a software suitable to be used by any user through a simple graphical user interface. Albeit developed in the fusion research context, BeSYC can be applied to any reactor/scenario type supported by the specific system code. The goals of BeSYC, the mathematical framework, the main characteristics, and the performed verification and validation activities are described in this paper.
- Open Access
- 24 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 12 (1) , 187
Post-Test Numerical Analysis of a Helium-Cooled Breeding Blanket First Wall under LOFA Conditions with the MELCOR Fusion Code
The validation of numerical tools employed in the analysis of incidental transients in a fusion reactor is a topic of main concern. KIT is taking part in this task providing both experimental data and by performing numerical analysis in support of the main codes used for the safety analyses of the Helium Cooled Pebble Bed (HCPB) blanket concept. In recent years, an experimental campaign has been performed in the KIT-HELOKA facility to investigate the behavior of a First Wall Mock-Up (FWMU) under Loss Of Flow Accident (LOFA) conditions. The aim of the experimental campaign was twofold: to check the expected DEMO thermal-hydraulics conditions during normal and off-normal conditions and to provide robust data for code validation. The present work is part of these validation efforts, and it deals with the analysis of the LOFA experimental campaign with the system code MELCOR 1.8.6 for fusion. A best-estimate methodology has been used in support of this analysis to ease the distinction between user’s assumptions and code limitations. The numerical analyses are here described together with their goals, achievements, and lesson learnt.
- 24 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 12 (1) , 187
Open AccessPost-Test Numerical Analysis of a Helium-Cooled Breeding Blanket First Wall under LOFA Conditions with the MELCOR Fusion Code
The validation of numerical tools employed in the analysis of incidental transients in a fusion reactor is a topic of main concern. KIT is taking part in this task providing both experimental data and by performing numerical analysis in support of the main codes used for the safety analyses of the Helium Cooled Pebble Bed (HCPB) blanket concept. In recent years, an experimental campaign has been performed in the KIT-HELOKA facility to investigate the behavior of a First Wall Mock-Up (FWMU) under Loss Of Flow Accident (LOFA) conditions. The aim of the experimental campaign was twofold: to check the expected DEMO thermal-hydraulics conditions during normal and off-normal conditions and to provide robust data for code validation. The present work is part of these validation efforts, and it deals with the analysis of the LOFA experimental campaign with the system code MELCOR 1.8.6 for fusion. A best-estimate methodology has been used in support of this analysis to ease the distinction between user’s assumptions and code limitations. The numerical analyses are here described together with their goals, achievements, and lesson learnt.
- Open Access
- 16 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 12010
Experimental Investigation of a Helium-Cooled Breeding Blanket First Wall under LOFA Conditions and Pre-Test and Post-Test Numerical Analysis
The experimental investigation of a prototypical set-up simulating a loss of flow accident in a helium-cooled breeding blanket first wall mock-up under typical heat load conditions is presented. The experimental campaign reproduces the expected DEMO thermal-hydraulics conditions during normal and off-normal situations and aims at providing some insight into the fast transients associated with the loss of flow in the blanket first wall. The experimental set-up and the definition of the experimental matrix are discussed, including pre-test analysis performed in support of these activities. The major experimental results are discussed, and a procedure of using the acquired data for validating and calibrating the RELAP-3D model of the mock-up is introduced. All these activities contributed to the creation of a relevant theoretical and practical experience that can be used in further studies concerning incidental transients in real-plant scenarios in the framework of DEMO plant fusion safety activities.
- 16 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 12010
Open AccessExperimental Investigation of a Helium-Cooled Breeding Blanket First Wall under LOFA Conditions and Pre-Test and Post-Test Numerical Analysis
The experimental investigation of a prototypical set-up simulating a loss of flow accident in a helium-cooled breeding blanket first wall mock-up under typical heat load conditions is presented. The experimental campaign reproduces the expected DEMO thermal-hydraulics conditions during normal and off-normal situations and aims at providing some insight into the fast transients associated with the loss of flow in the blanket first wall. The experimental set-up and the definition of the experimental matrix are discussed, including pre-test analysis performed in support of these activities. The major experimental results are discussed, and a procedure of using the acquired data for validating and calibrating the RELAP-3D model of the mock-up is introduced. All these activities contributed to the creation of a relevant theoretical and practical experience that can be used in further studies concerning incidental transients in real-plant scenarios in the framework of DEMO plant fusion safety activities.
- 14 May 2021
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 77 (5) , 391-402
Preliminary Accident Analysis of Ex-Vessel LOCA for the European DEMO HCPB Blanket Concept
For the helium-cooled pebble bed breeding blanket concept improved in 2016 and the associated primary heat transfer system (PHTS) following EU DEMO Baseline 2015, an ex-vessel loss-of-coolant accident (LOCA) has been investigated with the assumption of a double-ended guillotine break of a main pipe in an outboard (OB) loop of the PHTS. The break leads to helium blowdown into the tokamak cooling room. A fast plasma shutdown followed by a plasma disruption is activated after the detection of the LOCA due to the design basis accident. Regarding three affected first-wall (FW) areas in one or two OB loops, three main cases are considered. If the FW temperature reaches the defined temperature limit of 1000°C, the FW is assumed to be failed such that an in-vessel LOCA results. In total five scenarios are simulated using MELCOR 1.8.6 for fusion with respect to the affected FW areas, mitigated or unmitigated plasma disruption conditions, the options of the dry or wet suppression tank, and the transport of source terms performed in the case of the beyond design basis accident without the plasma shutdown. The transient results are discussed for the time evolution of the accident sequences, pressurization in the systems, temperature behavior in volumes and structures, and tritium and dust transport behavior.
- 14 May 2021
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 77 (5) , 391-402
Preliminary Accident Analysis of Ex-Vessel LOCA for the European DEMO HCPB Blanket Concept
For the helium-cooled pebble bed breeding blanket concept improved in 2016 and the associated primary heat transfer system (PHTS) following EU DEMO Baseline 2015, an ex-vessel loss-of-coolant accident (LOCA) has been investigated with the assumption of a double-ended guillotine break of a main pipe in an outboard (OB) loop of the PHTS. The break leads to helium blowdown into the tokamak cooling room. A fast plasma shutdown followed by a plasma disruption is activated after the detection of the LOCA due to the design basis accident. Regarding three affected first-wall (FW) areas in one or two OB loops, three main cases are considered. If the FW temperature reaches the defined temperature limit of 1000°C, the FW is assumed to be failed such that an in-vessel LOCA results. In total five scenarios are simulated using MELCOR 1.8.6 for fusion with respect to the affected FW areas, mitigated or unmitigated plasma disruption conditions, the options of the dry or wet suppression tank, and the transport of source terms performed in the case of the beyond design basis accident without the plasma shutdown. The transient results are discussed for the time evolution of the accident sequences, pressurization in the systems, temperature behavior in volumes and structures, and tritium and dust transport behavior.
- Open Access
- 24 February 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 155, 111566
Application of the best-estimate model calibration and prediction through experimental data assimilation methodology to the tests performed on a helium cooled First Wall Mock-up
- 24 February 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 155, 111566
Open AccessApplication of the best-estimate model calibration and prediction through experimental data assimilation methodology to the tests performed on a helium cooled First Wall Mock-up
- 22 February 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 155, 111541
Safety assessment for EU DEMO – Achievements and open issues in view of a generic site safety report
- 22 February 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 155, 111541
Safety assessment for EU DEMO – Achievements and open issues in view of a generic site safety report
- 1 September 2019
- Published by Elsevier in Fusion Engineering and Design
- Vol. 146, 111-114
Safety and environment studies for a European DEMO design concept
- 1 September 2019
- Published by Elsevier in Fusion Engineering and Design
- Vol. 146, 111-114
Safety and environment studies for a European DEMO design concept
- 1 November 2018
- Published by Elsevier in Fusion Engineering and Design
- Vol. 136, 1534-1539
Development and validation of the blanket First Wall mock-up model in RELAP5-3D
- 1 November 2018
- Published by Elsevier in Fusion Engineering and Design
- Vol. 136, 1534-1539
Development and validation of the blanket First Wall mock-up model in RELAP5-3D
- 1 November 2018
- Published by Elsevier in Fusion Engineering and Design
- Vol. 136, 958-963
BB LOCA analysis for the reference design of the EU DEMO HCPB blanket concept
- 1 November 2018
- Published by Elsevier in Fusion Engineering and Design
- Vol. 136, 958-963
BB LOCA analysis for the reference design of the EU DEMO HCPB blanket concept