Drag reduction by various micro-grooves in a rotating disk system
Open Access
- 2 February 2019
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 234 (1) , 110-123
Abstract
To study the effects of micro-groove cross section asymmetry on the flow characteristic and drag reduction efficiency under rotation, numerical simulations of various rotating disks with micro-grooves were performed. Experiments of two representative disks were conducted for comparison and validation. Both numerical results and experimental results show that micro-grooves are effective in drag reduction. The fluid flow is promoted at one micro-groove sidewall and suppressed on the other side. There is an extended low-pressure area between the micro-grooves and the disk clearance, which demonstrates the interaction phenomenon exists, could be discovered. The interaction phenomenon makes the micro-groove fluid suppress the clearance fluid. When the disks rotate, the micro-groove fluids are suppressed, and the extended low-pressure areas are intensified overall. Positive asymmetry coefficient micro-grooves have larger high-pressure areas, and negative asymmetry coefficient micro-grooves have larger low-pressure areas. A higher asymmetry coefficient micro-groove has a greater asymmetrical pressure distribution. In contrast, the extended low-pressure areas are slightly affected by micro-groove geometries. Positive asymmetry coefficient micro-grooves, including zero asymmetry coefficient micro-grooves, have higher drag reduction efficiencies, whereas negative asymmetry coefficient micro-grooves have lower drag reduction efficiencies. The optimal micro-groove asymmetry coefficient is 0.25–0.5 within the rotating Reynolds number limits of 0.703 × 106–1.406 × 106.Keywords
Funding Information
- National Key Research and Development Program of China (Grant No.2018YFB0606100)
- China Scholarship Council
This publication has 30 references indexed in Scilit:
- Biomimetic structures for fluid drag reduction in laminar and turbulent flowsJournal of Physics: Condensed Matter, 2009
- Bristled shark skin: a microgeometry for boundary layer control?Bioinspiration & Biomimetics, 2008
- Drag reduction of turbulent flow over thin rectangular ribletsInternational Journal of Engineering Science, 2007
- Passive and active control of near-wall turbulenceProgress in Aerospace Sciences, 1998
- Experiments on drag-reducing surfaces and their optimization with an adjustable geometryJournal of Fluid Mechanics, 1997
- Turbulent drag reduction mechanism above a riblet surfaceAIAA Journal, 1994
- A direct numerical simulation of laminar and turbulent flow over riblet-mounted surfacesJournal of Fluid Mechanics, 1993
- Riblets as a Viscous Drag Reduction TechniqueAIAA Journal, 1983
- Visualization of Fluid Flow Near a Rotating Disk in Dilute Polymer SolutionsBulletin of JSME, 1978
- On the stability of three-dimensional boundary layers with application to the flow due to a rotating diskPhilosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1955