SWSuping Wen

Suping Wen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Suping Wen has a total of 19 co-authors. Here are the top co-authors by number of shared publications:

  • Jian Wang

    School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, People’s Republic of China

    3 shared publications
  • Wenbo Wang

    School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, People’s Republic of China

    2 shared publications
  • Wenbo Wang

    Department of Fluid Machinery and Engineering, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, P.R. China

    2 shared publications
  • Zhixuan Zhang

    Department of Fluid Machinery and Engineering, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, P.R. China

    2 shared publications
  • B Khalighi

    General Motors Corporation, Research and Development Center, Warren, Michigan, USA

    1 shared publication
  • G Xi

    School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, People’s Republic of China

    1 shared publication

Latest Publications

  • Characterization of drag reduction performance over rotating microgrooves with different cross-sections

    by Suping Wen, Wenbo Wang, Zhixuan Zhang

    This paper presents a study of cross-sectional parameters and optimal drag reduction performance specifically for drag reduction in rotating microgroove applications. Rotating triangular microgrooves with nine asymmetrical and symmetrical cross-sections were numerically studied. In addition, a representative symmetrical rotating microgroove was experimentally tested. Positive asymmetrical microgrooves (including symmetrical microgrooves) were found to be sensitive to rotating Reynolds numbers and produced more significant drag reduction. Compared with a dimensioned asymmetry variable and other dimensionless parameters, the dimensionless asymmetry variable i+ could be used to describe drag reduction performance, which captured both the influence of microgroove cross-sectional asymmetry and turbulence intensity. A maximum drag reduction of up to 8.9% was obtained at 9.2 i+. With the exception of the torque, the velocity shift obtained from dimensionless velocity profiles could also be used to predict drag reduction performance, which has the potential for wider and more comprehensive application for any drag reduction technology.


  • Experimental study on the effect of different components collocations on flow of automotive cooling fan

    by Suping Wen, Yuwei Hao, Zhixuan Zhang, Yifei Wang

    The flow structure in the downstream region of the cooling fan has great impact on engine heat dissipation. An integrated PIV measurement system was designed and constructed to understand the flow field behind the cooling fan. In order to analyze the influence of interaction of different components on flow structure in downstream region, a series of experiments were conducted in four arrangements at three flow coefficients. The flow field was evaluated by velocity profile, vorticity, and turbulent intensity. These flow data reflect the effect of isolated components and their combinations quantitatively. This work provides useful information for engine cooling system design.


  • Open Access

    Drag reduction by various micro-grooves in a rotating disk system

    by Suping Wen, Wenbo Wang, Shuhuai Wu

    To study the effects of micro-groove cross section asymmetry on the flow characteristic and drag reduction efficiency under rotation, numerical simulations of various rotating disks with micro-grooves were performed. Experiments of two representative disks were conducted for comparison and validation. Both numerical results and experimental results show that micro-grooves are effective in drag reduction. The fluid flow is promoted at one micro-groove sidewall and suppressed on the other side. There is an extended low-pressure area between the micro-grooves and the disk clearance, which demonstrates the interaction phenomenon exists, could be discovered. The interaction phenomenon makes the micro-groove fluid suppress the clearance fluid. When the disks rotate, the micro-groove fluids are suppressed, and the extended low-pressure areas are intensified overall. Positive asymmetry coefficient micro-grooves have larger high-pressure areas, and negative asymmetry coefficient micro-grooves have larger low-pressure areas. A higher asymmetry coefficient micro-groove has a greater asymmetrical pressure distribution. In contrast, the extended low-pressure areas are slightly affected by micro-groove geometries. Positive asymmetry coefficient micro-grooves, including zero asymmetry coefficient micro-grooves, have higher drag reduction efficiencies, whereas negative asymmetry coefficient micro-grooves have lower drag reduction efficiencies. The optimal micro-groove asymmetry coefficient is 0.25–0.5 within the rotating Reynolds number limits of 0.703 × 106–1.406 × 106.


  • Intelligence design method for three-dimensional vaned diffusers in a centrifugal compressor

    by Jian Wang, Suping Wen, Wenbo Wang, Guang Xi

    This paper presents a multi-objective optimization-based intelligence design method for the design of the three-dimensional vaned diffuser for a given centrifugal compressor. This design method consists of three-dimensional vaned diffuser design model and its solving strategy. The three-dimensional vaned diffuser design model consists of the diffuser geometry mathematical model, performance evaluation model, objective equation, and design space. The diffuser geometry is described by the mathematical model of the meridional configurations and vane camber, trailing edge lean, and thickness. The generic design space is determined through literature statistical investigation. An NSGA-II multi-objective optimization algorithm, utilized to solve the three-dimensional vaned diffuser design model, directs the diffuser geometry variables to achieve the maximum stage isentropic efficiency and static pressure ratio at the design point within the design space automatically and intelligently. The presented three-dimensional vaned diffuser design method is demonstrated using a case test for a centrifugal impeller. The convergence of evolutionary solving for this three-dimensional vaned diffuser model is analyzed in detail, which provides the convergence reference for engineering applications. Three representative three-dimensional vaned diffusers on Pareto front are utilized to check the diversity of geometry shape and overall range performance characteristics. The results show that the three-dimensional vaned diffuser design method established here has excellent potential in automated design and maximizing stage performance. The method reported here could provide a valuable reference for the intelligent design of radial turbomachinery diffusers.


  • Study on drag reduction mechanism of rotating disk with micro-grooves

    by Suping Wen, Wenbo Wang, Jian Wang

    This paper presents the drag reduction mechanism of a rotating disk with micro-grooves. The flow characteristics of the micro-grooved disk at various rotating Reynolds numbers are investigated using experiments and large-eddy simulations. The results show that fluid in the gap between the disks undergoes circumferential movement, but fluid within the micro-grooves undergoes radial movement because of the dual function of wall rejection and boundary layer blockage. As a result, fluid within the micro-grooves moves very slowly and quietly. Hence, quiet and slow-moving fluid within the micro-grooves increases the thickness of the viscous sublayer and recedes mixed layer and suppresses the unstable motion. The mean relative velocity gradient of the immersed surface on the grooved disk becomes much lower than that of a smooth disk, and the contact area between the walls and the high-speed fluid is diminished. An interaction phenomenon between the micro-grooves and the gap could be discovered due to the micro-groove unenclosed structure. The interaction phenomenon makes the quiet fluid within the micro-grooves also suppresses the outside flow. Accordingly, a micro-grooved rotating disk has an obvious drag reduction effect compared with a rotating smooth disk.


  • Multidisciplinary design optimization to reduce erosion of blades in a mixed flow fan

    by Jian Wang, Suping Wen, Ting Li, Guang Xi

    This paper presents an anti-erosion design approach of multidisciplinary design optimization (MDO) for turbomachinery to improve the erosion resistance of the blades, and its application to the design of an industrial mixed flow fan is given. The method is based on a concept for turbomachinery anti-erosion design in the aerodynamic design stage by modifying the geometry of the turbomachinery. The MDO approach replaces the traditional time consuming design method through automatic analyses of the aerodynamic performance, stress distribution and erosion characteristics, controlled by the optimization strategy. In the MDO approach, a multi-objective optimization algorithm non-dominated sorting genetic algorithm-II combined with radial basis function meta-model is used to find the compromise between the conflicting demands of high-efficiency and low average erosion rate with constraints on the pressure ratio and the safety factor for the blade; finite element method is used to analyze the static mechanical responses of the blade; a Navier-Stokes solver is used to predict the aerodynamic performance; solid particle paths in a viscous flow are calculated by Lagrangian method, and then the prediction of erosion is performed based on Tabakoff erosion model. Both the aerodynamic and anti-erosion performances of three selected robust optimal solutions on the Pareto front are compared to those of the baseline. The results show that the main reason for the efficiency improvement of the optimized blades is probably the smaller flow separation region and weaker secondary flows. Further comparative analysis between the baseline blade and the compromise blade for the impinging parameters is presented, and the erosion rate of compromise blade can be considerably decreased due to the lower impact velocity, suitable impact angle and fewer impact times in comparison with that of the baseline blade. As a conclusion, it can be drawn that the proposed approach gives a further opportunity for turbomachinery anti-erosion design in consideration of other disciplines, and the methodology presented can be also applied to other turbomachinery and anti-erosion problem by a minor modification.


  • Experimental study on the effect of the shroud on the performance and flow field of an automotive cooling fan

    by X Hu, S Wen, Y Gao, G Xi, B Khalighi, J P Johnson

    The effect of the shroud position on the performance of an automotive cooling fan with the radiator mounted at the front end has been studied on a test platform, and the characteristics of the flow field and phase-averaged velocity, vorticity, and turbulence intensity in five phases behind the cooling fan have been acquired by using digital particle image velocimetry. Moreover, a comparison of the flow field behind the fan with the shroud and that behind the fan without the shroud is made. The results of the performance experiment demonstrate that the fan with the shroud covering only the front part of the rotor possesses the highest performance, and the performance of the fan without the shroud seems to be less affected by the system flowrate. Flow field measurements show that the fan with the shroud has a larger exit radial component of the velocity than the fan without the shroud except at low system flowrates, and the vorticity and the turbulence intensity of the fan with the shroud are lower than those of the fan without the shroud.