Phase Change Materials in Metal Casting Processes: A Critical Review and Future Possibilities
Authors:
- Utkarsh ChadhaUtkarsh Chadha
- Senthil Kumaran SelvarajSenthil Kumaran Selvaraj
- Harshita PantHPHarshita Pant
- Anisha AroraAAAnisha Arora
- Divyanshi ShuklaDSDivyanshi Shukla
- Ishika SanchetiISIshika Sancheti
- Arisha ChadhaACArisha Chadha
- Divyansh SrivastavaDSDivyansh Srivastava
- Mayank KhannaMKMayank Khanna
- S. Ram KishoreSKS. Ram Kishore
- Velmurugan ParamasivamVPVelmurugan Paramasivam
Open Access
- 4 February 2022
- journal article
- review article
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-14
Abstract
Phase change materials are the category of materials that release or absorb enough energy during phase change transformation to provide heating or cooling. Divided into two principal classes of organic and inorganic, these materials find a wide range of uses in commercial applications of casting where stable temperature and heat storage are a requirement. In this research work, application of inorganic phase change materials having significantly elevated temperature zone, especially within metal casting processes, has been discussed. Phase change material with high enthalpy of fusion and high melting point can be used for metal casting, but in a limited temperature range (between 200°C and 1300°C). In sand casting, inorganic PCM has the potential to be used as chills to provide directional solidification. Despite having advantages, inorganic PCM comes with major disadvantages, that is, toxicity, corrosivity, supercooling, and low thermal expansion. Few solutions to overcome these problems have been discussed in this research paper. Future research is required to reduce the disadvantage to a low level, so that PCM can be used in application where elevated temperature is achieved.Keywords
This publication has 78 references indexed in Scilit:
- Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storageApplied Energy, 2013
- Phase Changing Material Used with RP Technology in Quick Wax Molding for Investment CastingComputer-Aided Design and Applications, 2012
- Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storageSolar Energy Materials and Solar Cells, 2011
- The growth of income and energy consumption in six developing countriesEnergy Policy, 2007
- Determination of unidirectional heat transfer coefficient during unsteady-state solidification at metal casting–chill interfaceEnergy Conversion and Management, 2006
- Numerical study for enhancing the thermal conductivity of phase change material (PCM) storage using high thermal conductivity porous matrixEnergy Conversion and Management, 2005
- Improvement of thermal characteristics of latent heat thermal energy storage units using carbon-fiber brushes: experiments and modelingInternational Journal of Heat and Mass Transfer, 2003
- Thermal optimisation in the sand casting processEngineering Computations, 2001
- Thermal conductivity enhancement of energy storage media using carbon fibersEnergy Conversion and Management, 2000
- Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniquesEnergy Conversion and Management, 1998