Numerical Simulation and Design of Multi-field Coupling for Nonferrous Metals DC Electromagnetic Stirring
Preprint
- 25 January 2024
- preprint
- Published by Springer Nature in Research Square
Abstract
In the melting process of non-ferrous metals, melt stirring is one of the most important processes. In this paper, a new type of EMS (Electromagnetic Stirring) device with long service life and low energy consumption is designed based on the basic equations of Maxwell electromagnetics combined with finite element method. The effect of the designed EMS on the non-ferrous metal melt is studied. The 3D numerical model of multi-field coupling of DC EMS device is established. The distribution and morphological characteristics of magnetic field and flow field are simulated by ANSYS software. Through the streamline distribution and the volume fraction cloud diagram analysis, it is found that the melt flow state and the Si composition distribution are different under different stirring speed especially for early time, but when the time is long enough, the melt will be stirred evenly. During the stirring, the alternating magnetic field can form the circumferential electromagnetic torque, through which the non-ferrous metal melt can move. It is found that the circulating flow inside the melt and the shear flow near the groove wall are in conflict with each other. This phenomenon creates favorable conditions for the collision, friction and mixing of non-ferrous metals and reinforcement groups.Keywords
All Related Versions
This publication has 10 references indexed in Scilit:
- Numerical modeling of a benchmark experiment on equiaxed solidification of a Sn–Pb alloy with electromagnetic stirring and natural convectionInternational Journal of Heat and Mass Transfer, 2020
- Evolution of solidification structures and mechanical properties of high-Si Al alloys under permanent magnetic stirringMaterials Characterization, 2019
- Melting, Remelting, and Casting for Clean SteelSteel Research International, 2016
- The development of new metallurgical materials and technologies. Part 1Steel in Translation, 2016
- Numerical Simulation on A356 Aluminum Alloy Semi-solid Slurry Preparation with Electromagnetic StirringJournal of Mechanical Engineering, 2012
- Preparation of semi‐solid AlSi7Mg alloy slurry with big capabilityRare Metals, 2010
- Preparation of semisolid AlSi7Mg alloy slurry through weak traveling-wave electromagnetic stirringInternational Journal of Minerals, Metallurgy and Materials, 2009
- Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirringJournal of Materials Processing Technology, 2009
- Power consumption, mixing time, heat and mass transfer measurements for liquid vessels that are mixed using reciprocating multiplates agitatorsChemical Engineering and Processing - Process Intensification, 2007
- Research on semi-solid slurry of a hypoeutectic Al-Si alloy prepared by low superheat pouring and weak electromagnetic stirringRare Metals, 2006