Jing Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jing Zhang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Zhe Zhang
Guangxi University
4 shared publications - Can Ding
College of Electrical Engineering and New Energy, China Three Gorges University, Yichang 443002, China
2 shared publications - Chunlai Li
Key Laboratory of Hunan Province on Information Photonics and Freespace Optical Communications, Hunan Institute of Science and Technology, Yueyang, China
2 shared publications Daolin Xu
2 shared publications- Jiaxi Zhou
College of Mechanical and Vehicle Engineering, Hunan University, Changsha, CHINA
2 shared publications - Yaonan Wang
Hunan University
2 shared publications
Latest Publications
- Open Access
- 25 January 2024
- Published by Springer Nature in Research Square
Numerical Simulation and Design of Multi-field Coupling for Nonferrous Metals DC Electromagnetic Stirring
In the melting process of non-ferrous metals, melt stirring is one of the most important processes. In this paper, a new type of EMS (Electromagnetic Stirring) device with long service life and low energy consumption is designed based on the basic equations of Maxwell electromagnetics combined with finite element method. The effect of the designed EMS on the non-ferrous metal melt is studied. The 3D numerical model of multi-field coupling of DC EMS device is established. The distribution and morphological characteristics of magnetic field and flow field are simulated by ANSYS software. Through the streamline distribution and the volume fraction cloud diagram analysis, it is found that the melt flow state and the Si composition distribution are different under different stirring speed especially for early time, but when the time is long enough, the melt will be stirred evenly. During the stirring, the alternating magnetic field can form the circumferential electromagnetic torque, through which the non-ferrous metal melt can move. It is found that the circulating flow inside the melt and the shear flow near the groove wall are in conflict with each other. This phenomenon creates favorable conditions for the collision, friction and mixing of non-ferrous metals and reinforcement groups.
- 25 January 2024
- Published by Springer Nature in Research Square
Open AccessNumerical Simulation and Design of Multi-field Coupling for Nonferrous Metals DC Electromagnetic Stirring
In the melting process of non-ferrous metals, melt stirring is one of the most important processes. In this paper, a new type of EMS (Electromagnetic Stirring) device with long service life and low energy consumption is designed based on the basic equations of Maxwell electromagnetics combined with finite element method. The effect of the designed EMS on the non-ferrous metal melt is studied. The 3D numerical model of multi-field coupling of DC EMS device is established. The distribution and morphological characteristics of magnetic field and flow field are simulated by ANSYS software. Through the streamline distribution and the volume fraction cloud diagram analysis, it is found that the melt flow state and the Si composition distribution are different under different stirring speed especially for early time, but when the time is long enough, the melt will be stirred evenly. During the stirring, the alternating magnetic field can form the circumferential electromagnetic torque, through which the non-ferrous metal melt can move. It is found that the circulating flow inside the melt and the shear flow near the groove wall are in conflict with each other. This phenomenon creates favorable conditions for the collision, friction and mixing of non-ferrous metals and reinforcement groups.
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4371-4375
Dynamic Analysis of Multi-Dimensional Time Lag Fractional-Order Gene Regulatory Network
In this scholarly paper, we delve into the intricate realm of fractional gene regulatory networks (FGRNs), focusing primarily on their stability analysis. These networks, integral to the understanding of complex biological processes, are analyzed through the lens of fractional calculus, offering a fresh perspective in the study of their dynamic behavior. Our research revolves around the concept of time-delay. Time-delay, often encountered in gene regulatory processes, can significantly influence the stability and behavior of these networks.
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4371-4375
Dynamic Analysis of Multi-Dimensional Time Lag Fractional-Order Gene Regulatory Network
In this scholarly paper, we delve into the intricate realm of fractional gene regulatory networks (FGRNs), focusing primarily on their stability analysis. These networks, integral to the understanding of complex biological processes, are analyzed through the lens of fractional calculus, offering a fresh perspective in the study of their dynamic behavior. Our research revolves around the concept of time-delay. Time-delay, often encountered in gene regulatory processes, can significantly influence the stability and behavior of these networks.
- 1 January 2023
- Published by World Scientific Pub Co Pte Ltd in Fractals
- Vol. 31 (09)
ASYMPTOTIC STABILITY ANALYSIS AND STABILIZATION CONTROL OF FRACTIONAL-ORDER VEHICLE SUSPENSION SYSTEM WITH TIME DELAY
Our study focuses on the analysis of asymptotic stability and the development of asymptotic stabilization control methods for fractional vehicle suspension systems (FVSS). We begin by constructing a mathematical model for FVSS using the state-space equations of Caputo fractional calculus. Initially, we utilize the fractional Routh–Hurwitz criterion to derive the necessary conditions for asymptotic stability and instability in the open-loop system of the fractional vehicle suspension. Subsequently, we propose a novel control strategy for FVSS and establish an associated asymptotic stabilization criterion by combining a new vector Lyapunov function with the [ ]-matrix method. Moreover, we extend the fractional-order vehicle suspension model to include time delay resulting from the interactions between different variables in the real system, thus creating a FVSS with time delay. Based on the vector Lyapunov function, [ ]-matrix measure, and Razumikhin interpretation, we develop a control strategy specifically tailored for FVSSs with time delay. Lastly, we compare two numerical simulations of the FVSS, one with time delay and one without, to demonstrate the accuracy, effectiveness, and applicability of the proposed method presented in our paper.
- 1 January 2023
- Published by World Scientific Pub Co Pte Ltd in Fractals
- Vol. 31 (09)
ASYMPTOTIC STABILITY ANALYSIS AND STABILIZATION CONTROL OF FRACTIONAL-ORDER VEHICLE SUSPENSION SYSTEM WITH TIME DELAY
Our study focuses on the analysis of asymptotic stability and the development of asymptotic stabilization control methods for fractional vehicle suspension systems (FVSS). We begin by constructing a mathematical model for FVSS using the state-space equations of Caputo fractional calculus. Initially, we utilize the fractional Routh–Hurwitz criterion to derive the necessary conditions for asymptotic stability and instability in the open-loop system of the fractional vehicle suspension. Subsequently, we propose a novel control strategy for FVSS and establish an associated asymptotic stabilization criterion by combining a new vector Lyapunov function with the [ ]-matrix method. Moreover, we extend the fractional-order vehicle suspension model to include time delay resulting from the interactions between different variables in the real system, thus creating a FVSS with time delay. Based on the vector Lyapunov function, [ ]-matrix measure, and Razumikhin interpretation, we develop a control strategy specifically tailored for FVSSs with time delay. Lastly, we compare two numerical simulations of the FVSS, one with time delay and one without, to demonstrate the accuracy, effectiveness, and applicability of the proposed method presented in our paper.
- 1 September 2022
- Published by Elsevier in ISA Transactions
- Vol. 128 (Pt B) , 230-242
Novel fractional-order decentralized control for nonlinear fractional-order composite systems with time delays
- 1 September 2022
- Published by Elsevier in ISA Transactions
- Vol. 128 (Pt B) , 230-242
Novel fractional-order decentralized control for nonlinear fractional-order composite systems with time delays
- 29 June 2021
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 19 (4) , 410-423
Research on combined heat and power system based on solar-proton exchange membrane fuel cell
In order to solve the problem of power supply and heating in remote rural household of north China, taking rural houses in Yinchuan as the research object, a solar-proton exchange membrane fuel cell (PEMFC) combined heat and power (CHP) system that is suitable for supplying power and heating to household in remote rural areas in north China is proposed in this paper. The simulation model is developed by using the MATLAB/Simulink platform and the effects of key operating parameters (i.e. current density and active area) on the performances of the PEMFC are studied. And the control effects of PID and fuzzy PID on the outlet temperature of the PEMFC stack are analyzed. The changes in temperature of water tank and indoor heating temperature under different electric loads and solar radiation are compared and studied. Meanwhile, the change in temperature of water tank is analyzed with or without solar energy, and the electrical efficiency, thermal efficiency, and CHP efficiency of PEMFC CHP are studied. The results show that the current density and active area have a significant impact on PEMFC stack. The temperature of water tank can be increased by 20°C combining solar energy and PEMFC. In winter, under different electric loads and solar radiation, the solar-PEMFC CHP system can make the temperature of the water tank reach above 55°C, and make the indoor heating temperature reach 20°C~27°C.In addition, the maximum efficiency of PEMFC CHP system is about 83%.
- 29 June 2021
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 19 (4) , 410-423
Research on combined heat and power system based on solar-proton exchange membrane fuel cell
In order to solve the problem of power supply and heating in remote rural household of north China, taking rural houses in Yinchuan as the research object, a solar-proton exchange membrane fuel cell (PEMFC) combined heat and power (CHP) system that is suitable for supplying power and heating to household in remote rural areas in north China is proposed in this paper. The simulation model is developed by using the MATLAB/Simulink platform and the effects of key operating parameters (i.e. current density and active area) on the performances of the PEMFC are studied. And the control effects of PID and fuzzy PID on the outlet temperature of the PEMFC stack are analyzed. The changes in temperature of water tank and indoor heating temperature under different electric loads and solar radiation are compared and studied. Meanwhile, the change in temperature of water tank is analyzed with or without solar energy, and the electrical efficiency, thermal efficiency, and CHP efficiency of PEMFC CHP are studied. The results show that the current density and active area have a significant impact on PEMFC stack. The temperature of water tank can be increased by 20°C combining solar energy and PEMFC. In winter, under different electric loads and solar radiation, the solar-PEMFC CHP system can make the temperature of the water tank reach above 55°C, and make the indoor heating temperature reach 20°C~27°C.In addition, the maximum efficiency of PEMFC CHP system is about 83%.
- Open Access
- 30 May 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-14
Line Spectrum Chaotification on QZS Systems with Time-Delay Control
Chaotification can be employed to weaken or eliminate the feature of line spectra of waterborne noise. The efficiency of this method lies on the use of small control. The analysis reveals that the critical control gain depends on the stiffness of vibration isolation systems. Thus, an isolation raft system based on quasi-zero-stiffness (QZS) property is proposed for line spectrum chaotification. A nonlinear time-delay controller is derived accordingly. Comparative analysis shows that the new approach allows much smaller control, and the intensity of line spectra is further reduced. Numerical simulations also indicate other advantages with the introduction of QZS system into chaotification.
- 30 May 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-14
Open AccessLine Spectrum Chaotification on QZS Systems with Time-Delay Control
Chaotification can be employed to weaken or eliminate the feature of line spectra of waterborne noise. The efficiency of this method lies on the use of small control. The analysis reveals that the critical control gain depends on the stiffness of vibration isolation systems. Thus, an isolation raft system based on quasi-zero-stiffness (QZS) property is proposed for line spectrum chaotification. A nonlinear time-delay controller is derived accordingly. Comparative analysis shows that the new approach allows much smaller control, and the intensity of line spectra is further reduced. Numerical simulations also indicate other advantages with the introduction of QZS system into chaotification.
- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4547-4552
Recurrent Neural Network-Based Adaptive Sliding Mode Control for Trajectory Tracking of Second-Order Underactuated Systems
In this paper, the trajectory tracking control of second-order underactuated system with unmodeled dynamics and external disturbance is discussed. Adaptive neural network-based hierarchical sliding mode control is investigated to solve the problem. By introducing a novel recurrent neural network (RNN), which is used to compensate the unknown system model and disturbance, the robustness of the control systems is obviously improved. The stability of the control system is rigorously proved by the Lyapunov method and the adaptive laws is obtained. Through the stability analysis, the control scheme proposed in this paper can be applied in different second-order underactuated systems. Finally, the comparative simulation results are given to prove the effectiveness and superiority of the control scheme proposed in this paper.
- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4547-4552
Recurrent Neural Network-Based Adaptive Sliding Mode Control for Trajectory Tracking of Second-Order Underactuated Systems
In this paper, the trajectory tracking control of second-order underactuated system with unmodeled dynamics and external disturbance is discussed. Adaptive neural network-based hierarchical sliding mode control is investigated to solve the problem. By introducing a novel recurrent neural network (RNN), which is used to compensate the unknown system model and disturbance, the robustness of the control systems is obviously improved. The stability of the control system is rigorously proved by the Lyapunov method and the adaptive laws is obtained. Through the stability analysis, the control scheme proposed in this paper can be applied in different second-order underactuated systems. Finally, the comparative simulation results are given to prove the effectiveness and superiority of the control scheme proposed in this paper.
- 1 September 2015
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 39 (18) , 5392-5398
Amplitude control and projective synchronization of a dynamical system with exponential nonlinearity
- 1 September 2015
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 39 (18) , 5392-5398
Amplitude control and projective synchronization of a dynamical system with exponential nonlinearity
- 24 November 2014
- Published by Taylor & Francis in International Journal of Systems Science
- Vol. 47 (10) , 2440-2448
Synchronisation of a fractional-order chaotic system using finite-time input-to-state stability
The issue of synchronisation for a fractional-order chaotic system with uncertainties and disturbance is studied in this paper. The finite-time input-to-state stable theory of fractional-order dynamical system is presented for the first time. A linear feedback controller is proposed to achieve synchronisation of this fractional-order system and guarantee the bounded state error for any bounded interference in finite time. Since the chaotic system displays special dynamical behaviours as invariable Lyapunov exponent spectrums and controllable signal amplitude, one can achieve complete synchronisation and projective synchronisation by only adjusting the system parameter. Numerical simulations are shown to verify the feasibility of the presented synchronisation scheme.
- 24 November 2014
- Published by Taylor & Francis in International Journal of Systems Science
- Vol. 47 (10) , 2440-2448
Synchronisation of a fractional-order chaotic system using finite-time input-to-state stability
The issue of synchronisation for a fractional-order chaotic system with uncertainties and disturbance is studied in this paper. The finite-time input-to-state stable theory of fractional-order dynamical system is presented for the first time. A linear feedback controller is proposed to achieve synchronisation of this fractional-order system and guarantee the bounded state error for any bounded interference in finite time. Since the chaotic system displays special dynamical behaviours as invariable Lyapunov exponent spectrums and controllable signal amplitude, one can achieve complete synchronisation and projective synchronisation by only adjusting the system parameter. Numerical simulations are shown to verify the feasibility of the presented synchronisation scheme.
- 1 June 2014
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 333 (13) , 2665-2676
Dynamic effects of delayed feedback control on nonlinear vibration isolation floating raft systems
- 1 June 2014
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 333 (13) , 2665-2676
Dynamic effects of delayed feedback control on nonlinear vibration isolation floating raft systems