Gypsum Seeding to Prevent Scaling
Open Access
Abstract
Eutectic freeze crystallization (EFC) is a novel separation technique that can be applied to treat brine solutions such as reverse osmosis retentates. These are often a mixture of different inorganic solutes. The treatment of calcium sulphate-rich brines using EFC often results in gypsum crystallization before any other species. This results in gypsum scaling on the cooled surfaces of the crystallizer, which is undesirable as it retards heat transfer rates and hence reduces the yield of other products. The aim of this study was to investigate and understand gypsum crystallization and gypsum scaling in the presence of gypsum seeds. Synthetic brine solutions were used in this research because they allowed an in-depth understanding of the gypsum bulk crystallization process and scaling tendency without the complexity of industrial brines. A cooled, U-shaped stainless-steel tube suspended in the saturated solution was employed as the scaling surface. This was because a tube-shaped surface enabled the introduction of a constant temperature cold surface in the saturated solution and most industrial EFC crystallizers are constructed from stainless steel. Gypsum seeding was effective in decreasing the mass of scale formed on the heat transfer surface. The most effective seed loading was 0.25 g/L, which reduced scale growth rate by 43%. Importantly, this seed loading is six times the theoretical critical seed loading. The seeding strategy also increased the gypsum crystallization kinetics in the bulk solution, which resulted in an increase in the mass of gypsum product. These findings are relevant for the operability and control of EFC processes, which suffer from scaling problems. By using an appropriate seeding strategy, two problems can be alleviated. Firstly, scaling on the heat transfer surface is minimised and, secondly, seeding increases the crystallization kinetics in the bulk solution, which is advantageous for product yield and recovery. It was also recommended that the use of silica as a seed material to prevent gypsum scaling should be investigated in future studies.Keywords
This publication has 31 references indexed in Scilit:
- Wind-Aided Intensified eVaporation (WAIV) and Membrane Crystallizer (MCr) integrated brackish water desalination process: Advantages and drawbacksDesalination, 2011
- A case study for treating a reverse osmosis brine using Eutectic Freeze Crystallization—Approaching a zero waste processDesalination, 2011
- Experimental Investigation of CaSO4Crystallization on a Flat PlateHeat Transfer Engineering, 2006
- Determination of Critical Seed Loading Ratio for the Production of Crystals of Uni-Modal Size Distribution in Batch Cooling Crystallization of Potassium Alum.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2002
- Effect of cooling mode on product crystal size in seeded batch crystallization of potassium alumChemical Engineering Journal, 2001
- Investigation of the initial period of sulphate scale formation Part 2. Kinetics of calcium sulphate crystal growth at its crystallization on a heat-exchange surfaceDesalination, 2000
- Mixed salt crystallisation foulingChemical Engineering and Processing - Process Intensification, 2000
- Scaleup experiments on seeded batch cooling crystallization of potassium alumAIChE Journal, 1999
- Investigation of the initial period of sulphate scale formation Part 1. Kinetics and mechanism of calcium sulphate surface nucleation at its crystallization on a heat-exchange surfaceDesalination, 1999
- Large and Mono-Sized Product Crystals from Natural Cooling Mode Batch Crystallizer.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1996