Elevated-Temperature Tensile and Creep Properties of Some Structural and Prestressing Steels
Authors:
- 1 January 1970
- book chapter
- Published by ASTM International
- p. 186-208
Abstract
The tensile and creep characteristics of two structural steels (ASTM A36 and CSA G40.12) and a prestressing steel (ASTM A421), all three used extensively in the building industry, have been investigated. Information is presented concerning the initial portion of the stress-strain curve, the ultimate and yield strengths, the elongation, the reduction of area, and the two stress-dependent creep parameters, Z and εto, for temperatures up to 1200 and 1300 F. The tensile data obtained for ASTM A36 steel seemed to agree with other reported data. The G40.12 steel exhibited somewhat unusual tensile behavior at about 700 F. For the ASTM A421 steel the natural scatter of the test data overshadowed the effect of crosshead speed (0.02 to 0.75 in./min) at temperatures below 700 F. Harmathy's creep model seemed fairly well applicable to all three steels, and Clauss' rule concerning the creep rupture time to the two structural steels.Keywords
This publication has 9 references indexed in Scilit:
- A Comprehensive Creep ModelJournal of Basic Engineering, 1967
- PHYSICAL ASPECTS OF CREEP1964
- Creep and Rupture Properties of Carbon SteelsProceedings of the Institution of Mechanical Engineers, 1960
- EFFECT OF ELEVATED TEMPERATURES ON HIGH-TENSILE-STEEL WIRES FOR PRESTRESSED CONCRETE.Proceedings of the Institution of Civil Engineers, 1960
- Some fundamental experiments on high temperature creepJournal of the Mechanics and Physics of Solids, 1955
- Elevated-Temperature Properties of Carbon Steels1955
- The Influence of Temperature on the Elastic Constants of Some Commercial Steels1952
- Effect of Strain Rate Upon Plastic Flow of SteelJournal of Applied Physics, 1944
- The Elastic Properties of Steel at High TemperaturesTransactions of the American Society of Mechanical Engineers, 1935